RENTAL
A NSG 3060 Rental - Teseq 6.6kV Surge, Ringwave, & 4.8kV EFT
Conducted Immunity Generator Features
- 6.6kV Surge & 100kHz Ring Wave, EFT 4.8kV
- ISO 17025 Accredited Calibration included
- CDNs - Single/Three phase up to 620V/100A
- Free Technical Support & 2 Days Free Transit
- Touch Panel Screen, Easy to use Architecture
- Both IEC and ANSI coupling methods
- Turnkey Solution - Arrives Ready for Testing!
Overview
The Teseq (previously Schaffner) NSG 3060 EMC Immunity generator provides testing for EFT(electrical fast transients) to 4.8kV, Surge to 6.6kV, 100kHz ring wave to 6.6kV and offers solutions for both CE mark, ANSI, and IEC testing. A2LA accredited calibration and two free days of transit time is included in the rental equipment price. It includes both coupling methods associated with IEC and ANSI EMC testing standards. We also offer the full line of accessories available for rent, including the CDN 3083 series (CDN3083-S100 & CDN3083-B100), allowing for enhanced testing capabilities.
This multifunction generator offers a user-friendly design to help streamline testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN 61000-4-12, ANSI C62.41, C62.45, and UL 1449. It offers a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This system is often rented with the CDN 3061 (coupling decoupling network) allowing for single phase coupling up to 270V/16A.
This Immunity Test Generator has a Ethernet port for connect with a PC and includes window based software. This simplifies electromagnetic compatibility testing allowing for compilation of complex test sequences with diverse pulse types. The software with the NSG3060 test set enables the user to create reports and enter observations as the test progresses increasing the efficiency of long-term tests.
NSG 3060 CDNs/Accessories
RENTAL
Coupling/Decoupling Network (CDN) Features
- 3-Phase EFT & Surge (480V/32Amps)
- Laptop & ISO 17025 Calibration included
- Fully automated surge and / or burst coupling
- Free Technical Support & 2 Days Free Transit
- High accuracy switching technology
- Both IEC and ANSI coupling methods
- Turnkey Solution - Arrives Ready for Testing!
Overview
The Teseq CDN 3063 coupling decoupling network allows for 32Amp 480Volt three phase, EFT, Surge, and 100kHz ringwave for use with the NSG 3040 and NSG 3060. This testing accessory can be rented individually or together as an NSG3060 CDN3063 combination. This accessory is designed for maximum reliability in a wide range of test setups.
This immunity test equipment includes both IEC and ANSI coupling methods. It also includes a Phase Rotation indicator ensuring correctly sequenced power connection, preventing damage to equipment under test (EUT). An A2LA accredited calibration is included in the EMC test equipment price.
The CDN3063 allows for coupling for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12, ANSI C62.41, ANSI C62.45, and UL 1449. Through new technology it offers the ANSI C62.41 coupling method, used to measure and track the mains voltage and simultaneously control the pulse phase angle. We also offer rentals of higher current and voltage networks including the CDN3083-S100 and CDN3083-B100.
RENTAL
Coupling/Decoupling Network (CDN) Features
- 100 A (AC or DC); 690 VAC, 1000 VDC
- ISO 17025 Calibration included
- Meets IEC 61000-4-4 Ed.3.0
- Free Technical Support & 2 Days Free Transit
- Manual CDN - Use Will Variety Of Generators
- Up to 8.8 kV burst pulses
- Turnkey Solution - Arrives Ready for Testing!
Overview
The CDN 3083-B100 is a manual, external three phase, 690V, 100A coupler/decoupler for the EFT/Burst generated by the NSG 3060, NSG 3040, or similar Teseq product. A2LA accredited calibration is included in the EMC testing accessory price. This product can has a maximum burst voltage of 8800 volts.
This ideal for industries and applications that require higher AC and DC voltages and currents, including power & telecom industry, renewable energy applications, electric vehicle and charging stations. Given that this accessories weighs roughly 11lbs, it allows placement of the coupling decoupling network to distances between it and EUT as required by the standard.
The CDN 3083 - B100 is designed for testing of electrical fast transients, specifically EN/IEC 61000-4-4. This testing accessory is often rented in conjunction with the CDN 3083-S100 for surge and ringwave. It is designed to be used with an EUT supply in AC mode up to 690V.
RENTAL
Coupling/Decoupling Network (CDN) Features
- 620 Voltage/ 100Amps 3-Phase EFT & Surge
- ISO 17025 Calibration included
- 440 Volts with NSG 3040
- Free Technical Support & 2 Days Free Transit
- Manual CDN - Secure Wire Connections
- Complies with IEC / EN 61000-4-5 and ANSI C62.45
- Turnkey Solution - Arrives Ready for Testing!
Overview
The Teseq CDN 3083-S100 is an external, manual, three phase, 620v, 100a coupler/decoupler for the combination wave/surge and 100kHz ringwave generated by the NSG3060 and NSG 3040. This Teseq Product enables coupling modes with all types of symmetrical and asymmetrical coupling given in the EN/IEC 61000-4-5 and ANSI C62.41 2002.
This coupling decoupling network comes assembled and on wheels, providing an easily maneuverable turnkey solution. An A2LA accredited calibration is included in the price of this test equipment. It is often used in conjunction with the CDN3083-B100 providing 100Amp coupling/decoupling for Burst/EFT (electrical fast transients). These products are ideal for applications that require high AC and DC voltages and currents.
The CDN30830-S100 has all components, surge decoupling networks, INA 3080s, INA 3084 and earth rails installed. This testing accessory also comes with several cables allowing for required connections to be made easily. It can be rented individually to supplement existing testing capabilities, must be used with NSG 3060 or NSG 3040, or in combination with either Teseq surge generator.
RENTAL
Coupling/Decoupling Network (CDN) Features
- 270 Voltage/ 16Amps 1-Phase EFT & Surge
- ISO 17025 Calibration included
- Fully automated Surge and Burst coupling
- Free Technical Support & 2 Days Free Transit
- For Use Only with NSG 3060
- Both IEC and ANSI coupling methods
- Turnkey Solution - Arrives Ready for Testing!
Overview
The Teseq CDN3061 single phase coupler for use with the NSG 3060 Transient Immunity Tester for EFT, Surge and 100kHz Ringwave. This coupling/decoupling network is designed to be used with the NSG 3060 Immunity Test System. It comes with an ISO 17025 accredited calibration, technical support, and two free days transit time. This Teseq product is designed for maximum reliability, a diverse set of test setups, and both IEC & ANSI coupling methods.
The CDN 3061 network features a module for the power quality test required by EN/IEC 61000-4-11 and IEC/EN 61000-4-29. Automated variac accessories are available for connection to the CDN to perform the variation test described in IEC/EN 61000-4-11. Voltage variation test parameters are set via the generator’s user interface. Over temperature protection for the CDN 3061, which allows short term operation at currents exceeding the nominal rating, prevents damage to internal components.
This EMC immunity test product can be rented by itself or part of a system as the NSG 3060 CDN 3061. This Teseq tester provides coupling for both IEC and ANSI standards. The CDN 3061 utilizes the latest electronic component technology which guaranties remarkable phase coupling accuracy which exceeds the standard’s requirements.
RENTAL
Coupling Clamp (CCL) Features
- New design, Includes Safety Cover & Interlock
- ISO 17025 Calibration & 2 Days Free Transit
- Compliant IEC 61000-4-4 Ed.2 & Ed.3
- Can Work With Many Immunity Generators!
- Replaces CDN 8014 and CDN 8015
- Turnkey Solution - Arrives Ready for Testing!
Overview
The Teseq CDN3425 (Teseq CCL) main purpose is to couple Burst/EFT pulses to data lines. It can also be used to couple to mains lines where no CDN is available; for example, high current lines >200 A. This coupling decoupling network (CDN) capacitive coupling clamp (CCL) comes with an ISO 17025 accredited calibration and works with a many conducted immunity generators.
The new design is fully compliant with the specifications of IEC 61000-4-4 Ed 2.0 2004, as well as with the draft of EN/IEC 61000-4-4 Ed 3.0 to be published in 2012. This model also replaces earlier models CDN 8014 and CDN 8015.The coupling capacitance between the coupling clamp and the cable laid in it depends on the cable characteristics.
RENTAL
The Teseq INA6502 is an automated external transformer for the NSG 3040 and NSG 3060 test systems to perform dips and interrupts testing. A2LA accredited calibration is included in the EMC rental equipment price. This product allows for reducing the incoming supply voltage by pre-set amounts.
This Immunity Test Accessory is designed for easy handling and can be used in three different positions; laying, standing, or wall-mounted. Several control parameters can be accessed through the front panel including power and voltage selector rotary. This EMC test equipment also includes 16 A fuse located in the front of the unit for added protection.
The INA6502 tests to EN/IEC 61000-4-11 and power quality testing (PQT) with the 80% voltage position and to the large overcurrent capabilities in the step transformer. It provides four voltage dips allowing for testing to many standards and company requirements. This product can be controlled using the touch screen interface or the WIN 3000 remote control software.
RENTAL
The Teseq CDN HSS-2 Coupling Decoupling Network is designed for convenient surge testing with 1.2/50 μs pulses, as defined in EN/IEC 61000-4-5, on unshielded symmetrical high speed telecommunication lines e.g. Ethernet. A2LA accredited calibration is included in the EMC rental equipment price. This product allows testing on ISDN and Ethernet with 10/100BaseT and 1000BaseT. With a surge test voltage of 2 kV is the maximal residual voltage at the AE port only 65 V due to the excellent decoupling network. Additional decoupling elements are not required to protect the auxiliary equipment (AE).
RENTAL
EMTest CNV504N1.3 coupling/decoupling networks for unshielded unsymmetrical interconnection signal/data lines. Surge pulses or Ringwave pulses are applied to unshielded unsymmetrical interconnected lines by means of standalone coupling/decoupling networks for 4 signal/data lines.
CNV 504 N1.3 combines three different applications; coupling of Surge pulse via capacitor or gas arrestor and coupling of Ringwave pulses via capacitor being required by EN IEC 61000-4-5 and/or EN IEC 61000-4-12. The required coupling mode, Differential or Common, can easily be selected by means of a simple jumper.
In accordance with EN IEC 61000-4-5 and EN IEC 61000-4-12 pulses are coupled via different coupling elements such as capacitors or gas arrestors depending on the characteristics of the line signals.
RENTAL
CDN Telecom/Communication 1Gbit/s Features
- Coupling unshielded and shielded lines with up to 4 pairs
- ISO 17025 Calibration & 2 Days Free Transit
- Surge test to 3kV (1.2/50us) & Burst Test to 4kV (5/50ns)
- Residual voltage max. 50V at 3kV Surge
- Compatible to PoE and PoE+ requirements
- Turnkey Solution - Arrives Ready for Testing!
Conducted Immunity Generator Features
- 6.6kV Surge & 100kHz Ring Wave, EFT 4.8kV
- ISO 17025 Accredited Calibration included
- CDNs - Single/Three phase up to 620V/100A
- Free Technical Support & 2 Days Free Transit
- Touch Panel Screen, Easy to use Architecture
- Both IEC and ANSI coupling methods
- Turnkey Solution - Arrives Ready for Testing!
Overview
The Teseq (previously Schaffner) NSG 3060 EMC Immunity generator provides testing for EFT(electrical fast transients) to 4.8kV, Surge to 6.6kV, 100kHz ring wave to 6.6kV and offers solutions for both CE mark, ANSI, and IEC testing. A2LA accredited calibration and two free days of transit time is included in the rental equipment price. It includes both coupling methods associated with IEC and ANSI EMC testing standards. We also offer the full line of accessories available for rent, including the CDN 3083 series (CDN3083-S100 & CDN3083-B100), allowing for enhanced testing capabilities.
This multifunction generator offers a user-friendly design to help streamline testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN 61000-4-12, ANSI C62.41, C62.45, and UL 1449. It offers a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This system is often rented with the CDN 3061 (coupling decoupling network) allowing for single phase coupling up to 270V/16A.
This Immunity Test Generator has a Ethernet port for connect with a PC and includes window based software. This simplifies electromagnetic compatibility testing allowing for compilation of complex test sequences with diverse pulse types. The software with the NSG3060 test set enables the user to create reports and enter observations as the test progresses increasing the efficiency of long-term tests.
Data SheetUser Manual Application Guide - CDNs|
Common Standards |
EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN 61000-4-12 ANSI C62.41, C62.45, UL 1449 |
|
EFT Burst 5/50ns: |
|
|
Standards |
IEC 61000-4-4, ed.3 |
|
Voltage Waveform into 50Ω load |
5ns rise time±30%, 50ns pulse width ±30%, |
|
Voltage Waveform into 1000Ω load |
5ns rise time±30%, 50ns pulse width ±30%, |
|
Voltage Amplitude |
±100V to 2.4kV into 50Ω, ± 200V to 4.8kV into 1000Ω |
|
Burst Duration |
1 µs to 1999 s |
|
Burst Period |
1 ms to 4200 s |
|
Frequency |
100 Hz to 1000 kHz |
|
Combination Wave Surge: |
|
|
Standards |
IEC 61000-4-5 ed. 3, EN 61000-4-5, ANSI C62.41.2 Cat A& B, UL 1449 ed. 3 sec. 37, ANSI C62.45 |
|
Open Circuit Voltage Waveform |
1.2µs Front Time ±30%, 50µs Duration ±20% |
|
Short Circuit Current Waveform |
8µ Front Time ±20%, 20µs Duration ±20% |
|
Peak Open Circuit Voltage |
200V–6.6kV |
|
Peak Short Circuit Current |
100A–3.3kA @2 Ω, 16.6-550A@12Ω |
|
100kHz Ringwave: |
|
|
Standards |
IEC 61000-4-12, EN 61000-4-12, ANSI C62.41.2 Cat A& B, ANSI C62.45 |
|
Open Circuit Voltage Waveform |
100kHz Damped Cosine, risetime=.5µs+/-30%, Damping= 40%/peak |
|
Peak Open Circuit Voltage |
200V–6.6kV @12 Ω or @ 30 Ω |
|
Peak Short Circuit Current |
±6.6 to ±220 A ±10%@30 Ω ±16.6 to ±550 A ±10%@12 Ω |
|
Impulse Repetition Rate |
10s from 200V to 4400V, 20s from 4401V to 6600V |
|
Dips and Interrupts: |
INA 6502 external variac is available as a separate option |
Included with Rental Of Teseq NSG 3060
Below you will find a list of common accessories that you can expect to be delivered with the equipment. This is a generic standard list and should you require an exact connector or accessory please contact us prior to order shipping. We are also excited to offer many different testing accessories not standard with the immunity generator. This does not include any coupler/decoupler items or accessories. A detailed list of these can be found on the "All Accessories" tab.
NSG 3060
- Conducted Immunity System
- Control Software USB with License
- Calibration Documentation
- Power Cord
- Laptop with Charger
- Cross Over/ Ethernet Cable
- Printed Manual
- Interlock/Keeper
- Black Plastic Screw
- WIN3000 Installation Guide
- Shipping Case
- Weight: 140 LBS
- Dimensions: 28x26x18
Rent coupler decoupler networks (CDN)s from a preferred rental partner of Ametek CTS.
Take advantage of A2LA ISO 17025 calibrations and fast deliveries!
NSG 3060 Full Accessory List
| Item | Capabilities |
| CDN 3061 | Single phase 270 V / 16 A automatic coupling decoupling network |
| CDN 3063 |
Three phase 480 V / 32 A automatic coupling decoupling networks |
| CDN 3083S-100 |
Manual 3-phase coupler for Surge (8 kV) only (combination and ring wave) with EUT current up to 100 A / 200 A |
| CDN 3083B-100 | Manual 3-phase coupler for EFT / Burst (8 kV) only with EUT supply up to 690 VAC (1000 VDC) / 100 A |
|
Coupling network for 2 kV surge pulse 1.2 / 50 μs IEC/EN 61000-4-5 on unshielded symmetrical high speed telecom lines (Ethernet) |
|
| CNV504N1.3 |
4kV coupler/decoupler for Surge & Ringwave on 4 data lines |
| CDN 3425 |
Teseq Burst/EFT couple pulses to data lines. |
| CM.CCL |
Capacitive coupling clamp by Thermo-Keytek is designed for EFT pulses on I/O lines or data lines |
| CDN 3063-C32 |
Combined surge & burst coupling network for 480 VAC Ph-Ph, 32 A |
| CDN 3063-C63 |
Combined surge & burst coupling network for 480 VAC Ph-Ph, 63 A |
| CDN 8014/8015 |
Capacitive coupling clamp for burst |
| CDN 163 |
Burst coupling network 100 A per phase (coupling all to ref ground) |
| CDN 117/118 |
Coupling networks for signal-/data lines (surge) |
| CAS 3025 |
Burst/EFT verification set |
| MD 200A |
Voltage differential probe 7 kV |
| MD 300 |
Current probe 5 kA |
| INA 6501 |
Manual step transformer, 16 AAC, 0/40/70/80% |
| INA 6502 |
Automatic step transformer, 16 AAC, 0/40/70/80% |
| VAR 3005-S16 |
Automatic variable transformer, 1 x 16 A |
| VAR 3005-D16 |
Automatic variable transformer, 2 x 16 A |
| MFO 6501 |
Manual magnetic field option -4-8 |
| MFO 6502 |
Automatic magnetic field option -4-8 |
| INA 701 |
Magnetic field coil 1 x 1 m; with MFO max. 3.6 A/m -4-8; Surge* max. 1200 A/m -4-9 |
| INA 702 |
Magnetic field coil 1 x 1 m, with MFO max. 40 A/m -4-8; Surge* max. 1200 A/m -4-9 *) Pulse shape adapter INA 752 needed to surge generator |
| INA 752 |
Pulse shape adapter |
Widely Used Standards
This list is a more comprehensive list of all the standards covered with this immunity generator. This is by no means all the standards covered, but the major ones from the largest manufacturers and most widely used standards.
- EMC Directives
- UN ECE R10 (Automotive)
- IEC/EN 61000-4-4
- IEC/EN 61000-4-5
- IEC/EN 61000-4-8
- IEC/EN 61000-4-9
- IEC/EN 61000-4-11
- IEC/EN 61000-4-12
- IEC/EN 61000-4-29
- ANSI/IEEE C62.41
- EN 61000-6-1
- EN 61000-6-2
- EN 50370
- EN 61643
- EN 300386-2
- EN 300386 V1.3.2
- EN 301489-1
- EN 301489-7
- EN 301489-17
- EN 301489-24
- FCC 97-270 (part 68)
- IEC 60255-1
- IEC 60601-1-2
- IEC 61009-1
- IEC 61326
- IEC 61850-3
- ITU-T K.12
- ITU-T K.20
- ITU-T K.21
- ITU-T K.28
- ITU-T K.41
- ITU-T K.44
- ITU-T K.45
NSG 3060 - Overview & Setup: Transient Specialists
Description: This video provides an overview of the NSG 3060 immunity test generator for surge, ringwave, and electrical fast transient (EFT) testing with the CDN 3061 single phase coupler decoupler 270v/16amps. It talks briefly about capabilities of the test system, setup, and additional considerations. All of these pieces of test equipment are available for rental and come with ISO 17025 calibrations.
NSG 3060 -Multifunction Genertor Teseq
Description: This video made by Teseq, now owned by Ametek, provides overview of this test system including the capabilities and changing testing parameter. Video also includes both CDN 3083 & CDN 3061 coupling decoupling networks.
I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.
Scott D., TUV SUD Canada
Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!
John H., Gates Air, Inc.
Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.
Adam P., Clark Testing
Working for a testing company I deal with renting equipment all the time. Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.
Richard T., National Technical Systems
