EM Test VDS 200N30 - Rent 30Amp Voltage Drop Simulator

30Amp Voltage Drop Simulator:

  • DC Power Supply Dips/Int - ISO 7637: 2b & 4
  • Voltage up to 60V & 30A Easily Integrated Into Setup
  • Pre-programmed Test Routines & Software Included
  • Can be Rented with EM Test Autowave for OEM Pulses
  • Current ISO 17025 Cal & 2 Days Free Transit Time

Related Equipment


Included Items, View Packing List

Got Questions about the equipment? Get technical support

Two FREE days transit time with every rental

Request A Quote

Battery Simulators & Associated Equipment

Description

Overview

The VDS 200N series is used to simulate the various battery supply waveforms recommended by international standards and by car manufacturer requirements. Especially the manufacturer requirements are an important area covered by the VDS 200N series as there is a large variety of requirements. Secondly, the VDS 200N series serve as powerful DC voltage supplies for the DUT during the tests with automotive transients. The VDS 200N series covers all three supply voltage categories. Their current capability ranges up to 200A depending on the model and your application.

Data SheetUser ManualApplication Note - LV 124

 Specifications

Common Standards

ISO 7637-2 pulses 2b and 4, ISO 16750, GMW3172 and many others

Output Voltage

0V – 60V

Output Current

0A – 30A, continuous

Peak Current

15A

Frequency Range

DC to 100kHz


Supply Voltage

115/230V

Weight

49kg (108.02lbs)

Dimensions

19”/6HU

COMMON DATA (ALL MODELS)

 

Ripple voltage

Ur <0.2Vp-p, frequency min. 400Hz

Source impedance

Zi = <10mohm

Sinusoidal signal capability vs. Frequency *)

Vpp max. 16V up to 20kHz Vpp max. 10V up to 30kHz Vpp max. 6V up to 50kHz

 

Vpp max. 3V up to 100kHz via Analog In, controlled by AutoWave/AMP 200Nx only

 

VDS 200N30.1 and VDS 200N50.1: Vpp max. 65V resp. 35V up to 50kHz with respect to the selected voltage range Vpp max. 3V up to 100kHz via Analog In, controlled by AutoWave/AMP 200Nx only

Fuses

Depending on VDS 200N model

TRIGGER

 

Automatic

Automatic release of the events

Manual

Manual release of a single pulse

External

External release of a single pulse

OUTPUT

DUT Supply +/-

Safety laboratory or high current connectors

Ext. trigger

5-15V TTL; BNC connector

CRO Trigger

5V TTL-signal for oscilloscope

TEST ROUTINES FOR ARBITRARY WAVES

DC source

Max. 60V; current depending on VDS 200N model

Functions

Sine Wave Sweep

Sine Wave (Cranking)

Clipped Load Dump

Jump Start

Extern

GM 9105P Pulse 4

Drop and Jump pulse

Standard Test routines

ISO 7637, Pulses 2b and 4 ISO 16750-2 Jaso Test 1

Service

Service, Setup, Self test

INTERFACE

Serial interfaxe

USB

Parallel interface

IEEE 488, addresses 1 - 30

Remote control

To connect an external signal generator (10kohm): 0-10V / 0-50kHz max. 0.5V(p-p) / 0-100kHz

Video

EM Test - Automotive Conducted Immunity Generators

 

Description: This video provides an overview on the EM Test conducted immunity test system. The three major components of this automotive EMC test equipment are the LD 200N, UCS 200N, and VDS 200N. This video provides and overview of these test systems including, ISO 7637-2 waveforms covered, accessories that come with equipment, setup, connecting all equipment, and troubleshooting. It also, provides insight into how to setup the software to allow remote testing to be conducted through laptop.

 

You may also like

Recently viewed