Description
Overview
The Wavecontrol SMP2 electromagnetic field meter is designed for a variety of radiated EMF measurements upwards to 60GHz. It uses a variety of different probes for a variety of different applications and frequency ranges. This simple to use hand held control center provides both USB and Fiberoptic connections on the unit. Different parameters and settings can be adjusted or modified through the push button interface directly on the system, or through remote control with free software.
Data SheetUser Manual Quick Start GuideSpecifications
Version Dual |
For both kind of measurements using all field probes. |
Field probes |
Automatic detection and recognition |
Broadband |
0 Hz – 60 GHz (depending on field probe) |
Spectrum analysis |
up to 400 kHz |
Weighted Peak Method |
1 Hz – 400 kHz (Real time WPM for direct comparison with limits) |
Readout values | Total field (instantaneous, max., min. and average) Field components (X, Y, Z) |
E Field units |
V/m, kV/m, μW/cm2 , mW/cm2 , W/m2 , % |
H Field units | nT, μT, mT, T, A/m, %, mG, G |
Log time |
Configurable (from 0.5 s to 6 min)
|
Average modes | Fixed o Sliding, according to international standards |
Average intervals |
10 s, 15 s, 30 s, 1 min, 2 min, 5 min, 6 min, 10 min, 15 min, 30 min |
Schedule measurement | Customized (up to 24 hours) |
Memory capacity |
More than 1 million samples |
Data downloading | Mini-USB and Fibre Optics |
Firmware updating |
Mini-USB |
Alarm | 2400 Hz audible signal (adjustable threshold) |
Display type |
Color transmissive TFT (480 x 272 pixels)
|
Battery | Internal rechargeable Li-ion |
Temperature range |
-10 ºC to +50 ºC |
Size |
100 x 215 x 40 mm (3.9 x 8.4 x 1.5 “) |