Buy Used Thermo Keytek ECAT Modules & Systems

ECAT Dips Module

In Stock

Dips & Interruptions (PQF) Module Features:

      • 240 Volt & 32 Amp Maximum
      • ISO 17025 Calibration Included
      • IEC 61000-4-11 Compliant
      • Can Be Rented w/without E103 System
      • Free Technical Support & 2 Days Free Transit
      • Must be Used with ECAT E103 Controller

Overview

The ECAT EP62 made by Thermo Fisher Scientific / Keytek is designed to provide swells, dips, and interrupts(PQF) on power mains up to 240v and 32a. This Thermo Fisher Scientific EMI immunity test equipment comes with an  A2LA accredited calibration included with rental or purchase. The EP 62 plug-in module requires the ECAT E103 control unit.

This Thermo Fisher Scientific / Keyte test equipment provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with the EP62 be conducted efficiently without re-initializing the EUT between tests. This unit can be easily integrated with preexisting ECAT system by sliding the EP62 into open bay of the ECAT E103 control unit.

The ECAT EP62 is designed to test EN IEC 61000-4-11 and is compliant to single phase of this EMI Immunity standard. The modular system provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. The EP62 is a cost effective solution and in excellent working conduction and software can be acquired with purchase.

Add to cart

ECAT 1-Phase Coupler

In Stock

Coupler/Decoupler Features: 

      • 1-Phase 250 Volt & 16 Amp Maximum
      • ISO 17025 Calibration Included
      • Compliant ANSI C37.90
      • Can Be Rented w/without E103 System
      • Free Technical Support & 2 Days Free Transit
      • Must be Used with ECAT E103 Controller

Overview

The ECAT E551 made by Thermo Fisher Scientific / Keytek is designed for single-phase AC line coupling/decoupling for surge wave modules. The E551 plug-in module requires the ECAT E103 control unit and an AC mains surge generator module. This Thermo Fisher / Keytek product is designed for testing to EN IEC 61000-4-5, ANSI/IEEE C62.41, UL 1449.

This Thermo Fisher Scientific / Keytek product provides monitoring and peak detection of surge voltage across any two manually-selected lines. Monitoring can be at the EUT or at the front panel of the coupler/decoupler. This product can be controlled via the front panel or with Keytek software via computer.

The modular system of the ECAT E551 has the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. This unit can be purchased with an ECAT E103 and AC mains surge generator for an entire EMC immunity setup. This cost effective solution is in excellent working conduction and software can be acquired with purchase.

Add to cart

ECAT Surge Pulse Module

In Stock

Combination Wave Surge Module Features:

      • IEC 61000-4-5 & ANSI C37.90 Solution
      • ISO 17025 Calibration Included 
      • 4.4kV Generator & Built-in Pulse Monitor
      • Can Be Rented w/without E103 System
      • Free Technical Support & 2 Days Free Transit
      • Must be Used with ECAT E103 Controller

Overview

The ECAT E501B made by Thermo Fisher Scientific / Keytek is designed for single or three phase combination wave surge testing this thermo fisher scientific emi immunity test equipment comes with an A2LA accredited calibration included rental purchase the e501b plug-in module requires ECAT E103 control unit for use

This Surge/Combination Wave EMI test Equipment provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with the E501B be conducted efficiently without re-initializing the EUT between tests. This unit can be easily integrated with preexisting ECAT system by sliding the E501B into open bay of the ECAT E103 control unit.

ECAT E103 control unit for use.

The ECAT E501B is designed to test EN/IEC 61000-4-5 and ANSI/IEEE C62.41. The modular system of the E501B provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. The E501B is the newest E501 series model after the E501A. This cost effective solution is in excellent working conduction and software can be acquired with purchase.

Add to cart

ECAT EFT/Burst Module

In Stock

EFT/Burst ECAT Module Features: 

      • IEC 61000-4-4 ed.3 & ANSI C37.90 Solution
      • ISO 17025 Calibration Included
      • 4.4kV Generator & Built-in Pulse Monitor
      • Can Be Rented w/without E103 System
      • Free Technical Support & 2 Days Free Transit
      • Must be Used with ECAT E103 Controller

Overview

The ECAT E411 made by Thermo Fisher Scientific / Keytek is designed for electrical fast transients (EFT) and Burst testing to 4.4kV. This Thermo Fisher Scientific EMI immunity test equipment comes with an  A2LA accredited calibration included with rental or purchase. The E411 plug-in module requires the ECAT E103 control unit.

This Thermo Fisher Scientific / Keytek EFT/Burst Test Equipment provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with the E411 be conducted efficiently without re-initializing the EUT between tests. This unit can be easily integrated with preexisting ECAT system by sliding the E411 into open bay of the ECAT E103 control unit.

The ECAT E411 is designed to test EN/IEC 61000-4-4 ed.3 and ANSI C37.90. All of our E411 are upgraded to meet the latest version of IEC 61000-4-4. The modular system provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. This cost effective solution is in excellent working conduction and software can be acquired with purchase.

Add to cart

ECAT Transient Test System

Conducted Immunity Generator Features 

      • 6.6kV Surge & 100kHz Ring Wave, EFT 4.4kV
      • ECAT E103, E411, E501, E503, & E4554
      • Free Technical Support & 2 Days Free Transit
      • This is a combined solution on ECAT system
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The ECAT E103, E411, E501B, E503 and E4554 by Thermo Fisher Scientific / Keytek are designed to test to a variety of immunity standards requiring three phase surge, EFT, & ringwave. This Thermo Fisher Scientific EMI immunity test equipment comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E411, E501B, E503 and E4554 modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E411, E501B, and E503, can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12, ANSI/IEEE C62.41, ANSI/IEEE C62.45 and many other EMC standards. The modular system of this Thermo Fisher / Keytek product is upgraded to meet the latest requirements of the IEC standards. The E103 and E411, E501B, E503, E4554 combination can be controlled via front panel or through computer using Keytek software.  

Add to cart

Surge Pulse Generator & CDN

Combination Wave Surge System Features:

      • IEC 61000-4-5 & ANSI C37.90 Solution
      • ISO 17025 Calibration Included 
      • 4.4kV Generator & Built-in Pulse Monitor
      • Includes 3-Phase CDN & E103 Controller
      • Free Technical Support & 2 Days Free Transit

Overview

The ECAT E103, E501, and E4554 by Thermo Fisher Scientific / Keytek is designed to test to many EMC immunity standards requiring 6kV surge/combination wave with 3 phase power coupler/decoupler 480v, 32a EUT. This ECAT System comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E501, and E4554 modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E501 can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-5 ed.3, ANSI/IEEE C62.41, and UL 1449 and many other immunity standards that have a high voltage surge component. The modular system of this Thermo Fisher / Keytek product provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. The E103 and E501, E4554 combination can be controlled via front panel or through computer using Keytek software.

Add to cart

SALE/RENTAL

Thermo Keytek module for ECATS.  The E 4554 A is three-phase ac line coupler/decoupler for surge and EFT modules requires the E103 controller, and a transient generator module, the E501b surge module, E411 EFT module or the E503 ringwave module can be rented / purchased at an additional cost.

Add to cart

ECAT 8kV EFT Pulse Generator

Conducted Immunity Generator Features 

      • 8kV EFT/Burst & 3-Phase CDN
      • Thermo Keytek Test System
      • ECAT E103, E421, & E4554 Combination
      • Free Technical Support & 2 Days Free Transit
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The ECAT E103, E421 and E4554 by Thermo Fisher Scientific / Keytek is designed to test to a variety of immunity standards requiring 8kV EFT with 3 phase AC power coupler/decoupler to 480V, 32A. This ECAT System comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E421 and E4554 modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E421 can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-4, and many other immunity standards that have a high voltage EFT component. TThe modular system of this Thermo Fisher / Keytek product provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. The E103 and E421, E4554 combination can be controlled via front panel or through computer using Keytek software.

Add to cart