EM Test PCD 8 S-3-690-1000-100
Related Equipment
Description
Description Surge pulses are applied to high voltage and high current supply lines by means of standalone coupling/decoupling networks. For such testing AMETEK CTS offers the PCD 8 s-3-1000-100 for supply lines up to 3 * 690 V AC, 1.000 V DC and up to 100 A.
According to IEC/EN 61000-4-5 the pulses are manually coupled via cable loops for line to line (2 ohm/18 uF) or line to PE (12 Ohm/9 uF) coupling.
Test Setup
The AMETEK CTS PCD 8 s-3-690-1000-100 coupling decoupling network is a manual CDN for coupling Surge pulses onto high voltage / current power supply lines. High-current couplers may need to be taken to test sites where it is commonly impossible to move large installations in. For convenience, the PCD 8 s-3-690-1000-100 can be disassembled in handy parts and can easily move to other places. Wheels with braking features can be mounted to maneuvering the coupler even on ramps and uneven surfaces.
Coupling
The Surge Coupling Unit (SCU) included in the scope of delivery is mounted on top of the decoupling networks, with one SCU following coupling modes are possible:
IEC line to line (18 μF), Lx - N, Lx - Lx, IEC line to ground (9 μF), N - PE, Lx - PE
- Specifications:
- Model: PCD 8 S-3-690-1000-100
- 8 kV coupling/decoupling network max. line current 100 A (AC and DC)
- AC voltage EUT
- 3 * 690 V (p-p)
- DC voltage EUT
- 1.000 V
- AC/DC current EUT
- 32 - 100 A (IEC + ANSI)
- Surge coupling
- as per Fig. 5/6 of IEC 61000-4-5 Ed.3,
- 18 uF capacitor via 2 ohm,
- 9 uF capacitor via 12 ohm - Technical Data:
- Impulse voltage
- max 8.0 kV +/- 10 %
- Coupling
- Manual setting with loops
- Grounding
- Earth terminal
- Residual voltage
- < 3000 V @ 6000 V surge, typical < 2000 V
- Generators with 400 Volt CDN:
- Lines
- AC: L1, L2, L3, N, PE
DC: Use L1 and N for DC-supply - Supply voltage
- max. 3 * 690 V AC (p-p) max. 1.000 V DC
- EUT current
- IEC + ANSI: 32 - 100 A
- Generators with 300 Volt CDN:
- Lines
- AC: L1, L2, L3, N, PE
DC: Use L1 and N for DC-supply - Supply voltage DC
- max. 1.000 V
- compact NX (300 V-model)
- EUT supply voltage:
max. 480 V AC rms L to L
max. 480 V AC rms L to N/PE - NSG 3040A /3060A
- EUT supply voltage:
max. 480 V AC rms L to L max.
300 V AC rms L to N/PE - EUT current
- IEC + ANSI: 32 - 100 A
- Connector
- Screw terminal rated for 200 A, 6 mm (max. 8 Nm)
- General:
- Input connectors
- HV: 4 mm safety banana plug
COM: Fischer F-105
A suitable set of connection cables is part of delivery (PCS SET 1). - Dimensions (LxWxH)
- 850 mm x 520 mm x 345 mm
- Weight
- app. 110 Kg
- Environment:
- Temperature
- 10 C to 40 C
- Humidity
- 30 % to 70 %, non condensing
- Atmospheric pressure
- 86 kPa (860 mbar) to 106 kPa (1,060 mbar)
info@transientspecialists.com