Showing 209 - 224 of 314 products
Quick Access
Return Instructions

Standard Terms

Transient Specialists, Inc. (TSI)

Standard Terms & Conditions:

  • TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  • Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  • Payment terms are net 30 with credit approval. Non-payment or late payment of amounts due will result in interest charges of 1% per month and upon demand, return of the equipment.
  • The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  • In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem.  Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  • The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  • The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  • The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  • In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  • The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  • This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
  •  

    FAQ
    Tekbox TBMA4 - Front Side Tekbox TBMA4 - Front
    Tekbox TBMA4 - Rent Double Ridge Horn Antenna 8GHz
    • Frequency Range 1 GHz to 8 GHz
    • Ideal for Emissions Pre-Compliance to CISPR 16
    • Antenna Factor from 24 to 43 dB/m Over Range
    In Stock
    Tekbox TBWA2 - Front Side Tekbox TBWA2 & Connectors
    Tekbox TBWA2 - Rent 40dB RF Preamplifier to 6 GHz
    • Frequency Range 2 MHz to 6 GHz
    • Often used with EMC Near Field Probes
    • Input: 50 Ohm, SMA; Output: 50 Ohm, SMA
    In Stock
    Tektronix P6015 - Side Tektronix P6015 - Front
    Tektronix P6015 - Rent 20 kV High Voltage Probe
    • Attenuation settings 1000:1, +/-5%.
    • Frequency Range DC - 75 MHz 
    • Input Resistance 100 Megaohms
    Teseq 171-508 - NSG 435 Battery Pack Charger
    Teseq 171-508 - NSG 435 Battery Pack Charger
    • Battery Pack Charger for NSG 435
    • Confirm Compatibility with Existing Battery
    In Stock
    Teseq 402-988 NSG 435 Grounding Cable
    Teseq 402-988 NSG 435 Grounding Cable
    • Replacement Cable Teseq NSG 435
    In Stock
    Teseq CIP 9136A & MD 4070A - In front of calibration fixtures Teseq CIP 9136A & MD 4070A - In front top of calibration fixtures
    Teseq BCI Kit 10 kHz - 400 MHz - Rental RF Injection Kit
    • 10 kHz to 400 MHz BCI Test Bundle
    • Includes CIP 9136A Injection Probe
    • Designed for ISO, OEM, & MIL-STD Tests
    Teseq CAS 3025 - Attenuators Teseq CAS 3025 - Case & Accessories
    Teseq CAS 3025 - Rent Burst/EFT Pulse Verification Kit
    • Verification/calibration Kit for IEC 61000-4-4
    • INA 265B 50 Ohm & INA 266A 1 k Ohm Termination
    • For peak voltages up to 8.8 kV
    Teseq CBA 1G-150D - Front Side Teseq CBA 1G-150D - Rent 150 W RF Amplifier 80 MHz - 1 GHz
    Teseq CBA 1G-150D - Rent 150 W RF Amplifier 80 MHz - 1 GHz
    • 80 MHz - 1 GHz 150 Watts Psat (min)
    • 125 Watts Power P1dB (min)
    • Class A Operation & Front Panel Display
    Buy Used-$13,000
    In Stock
    Teseq CBA 1G-300B - Rent 300 W 80 MHz - 1 GHz Amplifier CBA 1G-300 - Front
    Teseq CBA 1G-300B - Rent 300 W 80 MHz - 1 GHz Amplifier
    • 80 MHz - 1 GHz 300 Watts Psat (min)
    • 250 Watts Power P1dB (min)
    • Class A Operation & Front Panel Display
    Teseq CBA 400M-110 - Front side Teseq CBA 400M-110 - Front
    Teseq CBA 400M-110 - Rent 110W 10 kHz - 400 MHz RF Amplifier
    • 10 kHz - 400 MHz 110 Watts Psat (min)
    • 80 Watts Power P1dB (min)
    • Class A Operation & Ethernet Control
    Teseq CBA 400M-260 Front Side Teseq CBA 400M-260 Front Above
    Teseq CBA 400M-260 - Rent 260 Watt 10 kHz - 400 MHz Amplifier
    • 10 kHz - 400 MHz 260 Watts Psat (min)
    • 210 Watts Power P1dB (min)
    • Class A Operation & Ethernet Control
    In Stock
    Teseq CBA6G-050D - Front Side Teseq CBA6G-050D - Front
    Teseq CBA6G-050D - Rent 50 Watt 1 GHz - 6 GHz Amplifier
    • 1 GHz - 6 GHz 60 Watts Psat (min)
    • 50 Watts Power P1dB (min)
    • Class A Operation & Front Panel Display
    Buy Used-$16,000
    In Stock
    Teseq CDN 117A Front Side Teseq CDN 117A Front
    Teseq CDN 117A - Rent 4 Line Unsymmetrical Surge CDN
    • CDN for 4 Unshielded Unsymmetrical Lines
    • Coupler for Surge & Ringwave Transients
    • Maximum Impulse Voltage 4.8 kV
    Teseq CDN 3061 - Front Top Teseq CDN 3061 - Front
    Teseq CDN 3061 - Rent Single-Phase 16 Amp CDN
    • Coupler for Surge, EFT, & Ringwave Pulses
    • Maximum 270 Volts 16 Amps AC/DC
    • Rented with Teseq NSG 3060 Test System
    Teseq CDN 3063 - Front Side Teseq CDN 3063 - Rent 3-Phase 480 Volt 32 Amp CDN
    Teseq CDN 3063 - Rent 3-Phase 480 Volt 32 Amp CDN
    • Coupler for Surge, EFT, & Ringwave Pulses
    • Maximum 480 Volts 32 Amps AC/DC
    • Automatic Coupler for NSG 3060/NSG 3040
    In Stock
    Teseq CDN 3083-B100 - Front Side Teseq CDN 3083-B100 - Side Top
    Teseq CDN 3083-B100 - Rent 100 Amp 3-Phase Burst CDN
    • Designed for Burst to IEC 61000-4-4
    • Max 100 Amps 690 V AC or 1,000 V DC
    • Handles up to 8.8 kV EFT/Burst Pulses