Products

Quick Access

Return Instructions

Standard Terms

Transient Specialists, Inc. (TSI)

Standard Terms & Conditions:

TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.

Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.

Payment terms are net 30 with credit approval. Non-payment or late payment of amounts due will result in interest charges of 1% per month and upon demand, return of the equipment.

The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.

In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.

The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.

The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.

The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.

In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.

The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.

This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.

FAQ

Solar 9142-1N - Current Injection Probe 2 MHz - 500 MHz

Frequency Range 2 MHz - 500 MHz
Maximum Power 200 Watts
Component of CS115 & CS116 Accessory Package

In Stock

Solar 9354-2 - Rent MIL-STD-461 CS116 Transient Generator

3 Double Exponential Pulse 6.4 μs, 70 μs, & 120 μs
6 Damped Sinusoidal Pulses 10 kHz - 100 MHz
Compliant to MIL-STD-461 CS116

In Stock

Solar 9355-1 - Rent MIL-STD-461 CS115 Pulse Generator

2 kV 2 ns Rise/Fall Time Pulse Generator
Compliant MIL-STD-461 CS115 Transients
Selectable Pulse Rate .6 to 150 per second

In Stock

Solar 9410-1 High Voltage Attenuator 50/50 Ω

Rented with CS115 & CS116 Accessory Package
Maximum 2500 Volt Peak, 40dB
50 Ohm Impedance

In Stock

Solar 9554-1M/6M - Rent Variable Frequency Module

Covers 1 MHz to 6 MHz Frequency Range
Used with Solar 9354-2/-1 Pulse Generators
Meets Requirements for MIL-STD-461 CS116

In Stock

Solar Electronics 9123-1N Current Probe 10 kHz - 450MHz

Frequency Range 10 kHz - 450 MHz
Probe Peak 60A Max; CW Current Max 40A
Rented with CS115 & CS116 Test Kit

In Stock

Solar LISN 9233-50 - Rent 50μH 50Amp LISN 10kHz –50MHz

Frequency 10 kHz – 50 MHz
0.25 µF Coupling Capacitor
Designed for MIL-STD-461D/E/F/G

Solar MIL-STD-461 CS116 & CS115 Accessory Package

Includes Injection Probes, Monitoring Probe, & Attenuators
Common MIL-STD-461 CS116 & CS115 Required Accessories
Ideal for Rental with Solar 9354-2 & 9355-1 Generators

In Stock

Solar Type 9225-0.5 - Rent 0.5 Ω Precision Resistor

.5 Ohm Precision Resistor
Used for CS101 Calibration
Typically Rented with Test System

TekBox TBCP2 - Rent 750 MHz Current Monitoring Probe

Frequency 10 kHz - 750 MHz
Includes TBCP4-750 Calibration Fixture
Internal Diameter of 32 mm

In Stock

TekBox TBFL1 - Rent Transient Limiter & 10dB Attenuator

Frequency Range 9 kHz to 600 MHz (Pass-band)
Prevent Damage to Instrument from Voltage Spikes
Rented with LISN/AN or Analyzer

TekBox TBLC08 - Rent 50µH 8 Amp AC LISN

Frequency Range: 9 kHz - 30 MHz
Nema Style US Socket on Front
Line Voltage Maximum 240 Volts AC

In Stock

TekBox TBMA1 Biconical Antenna - Front Side

TekBox TBMA1 - Rent 30 MHz - 1 GHz Biconical Antenna

30 MHz to 1 GHz Biconical Measurement Antenna
Small, Lightweight Device, & Includes Tripod
Max Continuous RF Input Power: 2 Watts

In Stock

Tekbox TBMA4 - Rent Double Ridge Horn Antenna 8GHz

Frequency Range 1 GHz to 8 GHz
Ideal for Emissions Pre-Compliance to CISPR 16
Antenna Factor from 24 to 43 dB/m Over Range

In Stock

Tekbox TBWA2 - Rent 40dB RF Preamplifier to 6 GHz

Frequency Range 2 MHz to 6 GHz
Often used with EMC Near Field Probes
Input: 50 Ohm, SMA; Output: 50 Ohm, SMA

In Stock

Tektronix P6015 - Rent 20 kV High Voltage Probe

Attenuation settings 1000:1, +/-5%.
Frequency Range DC - 75 MHz
Input Resistance 100 Megaohms