Showing 225 - 240 of 305 products
Quick Access
Return Instructions

Standard Terms

Transient Specialists, Inc. (TSI)

Standard Terms & Conditions:

  • TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  • Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  • Payment terms are net 30 with credit approval. Non-payment or late payment of amounts due will result in interest charges of 1% per month and upon demand, return of the equipment.
  • The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  • In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem.  Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  • The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  • The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  • The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  • In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  • The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  • This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.

    •  

    FAQ
    Teseq CDN HSS-2 Front Side Teseq CDN HSS-2 Side
    Teseq CDN HSS-2 - Rent Symmetrical High-Speed Data CDN
    • CDN for up to 8 wire unshielded twisted pair (UTP)
    • Max Surge Voltage 2 kV Current 50 Amps
    • Coupling to 1, 2 or 4 pairs
    In Stock
    Teseq CDN M5-100S - Front Side Teseq CDN M5-100S - Side
    Teseq CDN M5-100S - Rent 3-Phase 100 Amp CDN
    • Frequency 150 kHz - 80 MHz
    • Max 500 V/100 A AC or 600 V/100 A DC
    • Designed for 5 AC Supply Lines
    In Stock
    Teseq CIP 9136A Front Side Teseq CIP 9136A Front
    Teseq CIP 9136A - Rent 400 MHz Current Injection Probe
    • Frequency Range 4 kHz - 400 MHz
    • Compliant to IEC, ISO, & MIL-STD Tests
    • High power handling (up to 1 kW)
    Monthly Rental- $1,000
    Choose options
    In Stock
    Teseq CN T8-AC - Front Side Teseq CN T8-AC - Front
    Teseq CN T8-AC - Rent Data Line AC Coupling Network
    • Frequency Range: 15 Hz to 150 kHz
    • Max 63 V AC or 100 V DC (200 mA per Line)
    • Rented with Common Mode Test System
    In Stock
    Teseq CN T8-DC - Front Side Teseq CN T8-DC - Front
    Teseq CN T8-DC - Rent Data Line DC Coupling Network
    • Frequency Range: DC
    • Max 63 V AC or 100 V DC (200 mA per Line)
    • Rented with Common Mode Test System
    In Stock
    Teseq EXT 10uF - Front Side Teseq EXT 10uF mounted on LISN
    Teseq EXT 10uF - 10 µF capacitor for RTCA/DO-160G
    • Designed for RTCA/DO-160 Testing
    • 10uF/1000 Volt Capacitor
    • Rented with HV-AN 150 LISN
    Teseq HV-AN 150 Front Side Teseq HV-AN 150 Front Top
    Teseq HV-AN 150 - Rent 5uH 150 Amp Artificial Network
    • Max 1000 V/150 A DC or 500 V/150 A AC
    • HV Compliant to ISO 7637-4 & CISPR 25
    • Jumpers Provide LISN Path Configuration
    In Stock
    Teseq INA 102A
    Teseq INA 102A - 50 Ohm Calibration Adapter MD 102A/103
    • 50 Ohms as Required by IEC 61000-4-2
    • Designed for Calibration of MD 102A/103
    • ISO 17025 Calibration Available
    Teseq INA 3151 - 1000 VDC / 63A Adapter for CDN 3153-S63 Teseq INA 3151 - 1000 VDC / 63A Adapter for CDN 3153-S63
    Teseq INA 3151 - 1000 VDC / 63A Adapter for CDN 3153-S63
    • Allows for Testing 1000 V DC / 63 Amps
    • Connects to Back of CDN 3153-S63
    • Rented with Teseq 3150 Test System
    Teseq INA 402A - NSG 435 Mains Power Supply
    Teseq INA 402A - NSG 435 Mains Power Supply
    • Used only with Teseq NSG 435
    • Manufacturer Part Number INA 402A
    • Removes Need for Battery Charging 
    Teseq INA 405 - Side Front Teseq INA 405 - Side
    Teseq INA 405 - NSG 435 Rechargeable Battery Pack
    • Rechargeable Battery Pack for the NSG 435 
    • Confirm Compatibility with Existing Charger
    • Manufacturer Part Number INA 405
    Buy New- $895
    In Stock
    Teseq INA 417 - Opto-link 10 meter for Dito
    Teseq INA 417 - Opto-link 10 meter for Dito
    • Connects to side of Simulator
    • USB Connection on one end
    Teseq INA 420 - NSG 435 Fast Rise Time Tip
    Teseq INA 420 - NSG 435 Fast Rise Time Tip
    • Fast Rise Time Contact Tip
    • Designed for Contact Discharge Testing
    • Used with Teseq NSG 435
    In Stock
    Teseq INA 424 - Front Teseq INA 424 - Front Top
    Teseq INA 424 - NSG 435 Air Discharge Tip
    • Air Discharge Tip for Teseq NSG 435
    • Attaches to Front of Simulator
    • Part Number INA 424 / TIP16 AD
    In Stock
    Teseq INA 4381 - 150 pF/2 kOhm Discharge Network Teseq INA 4381 - 150 pF/2 kOhm Discharge Network
    Teseq INA 4381 - 150 pF/2 kOhm Discharge Network
    • 150 pF/2 kΩ ISO 10605 Automotive Network
    • Used with Teseq NSG 437 or NSG 438 Series
    • ISO 17025 Calibrations Available
    Teseq INA Discharge Network - Front Top Teseq INA Discharge Network - Front Side
    Teseq INA 4382 - 330 pF/2 kOhm Discharge Network
    • 330 pF/2 kΩ ISO 10605 Automotive Network
    • Used with Teseq NSG 437 or NSG 438 Series
    • ISO 17025 Calibrations Available