Home Transient Generator Rentals EM Test NX5 bsp-1-300-16

EM Test NX5 Test System Overview - Detailed Video Guide

EM Test NX5 bsp-1-300-16

Name: EM Test NX5 bsp-1-300-16 - Rent 5 kV Surge & EFT Generator
Brand: EM Test
Price: 900.0 USD
Availability: OutOfStock

Rent 5 kV Surge & EFT Generator

The EM Test NX5 bsp-1-300-16 provides capabilities for 5 kV surge, 5.5 kV EFT, and PQF testing with an integrated 16 A single-phase coupling network and touchscreen display.

Features

Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail

Built-in single phase CDN Max 300 V/16 A AC or DC

Laptop with iec.control software included

External Three-phase & Data Line CDNs Available

Current ISO 17025 Accredited Calibration

Order Type

$900

Weekly Rental

$1,250

Two Week Rental

$1,550

Monthly Rental

Up to 4 Free Days of Transit Time

Two transit days each way are excluded from rental period

Conducted Immunity System

Laptop & Power Cord

Test System Power Cord

Printed Manual

Calibration Documentation

ESC EUT Power In Cord

ESA 1.6 EUT Supply Adapter

SCC AD Short Circuit Interlock

SWLAD Warning Lamp Adapter Interlock

Ethernet Cable

Software on USB Stick

Software License

UOC Optical Converter USB to LWL

5m. Orange Fiber-optic cable

EFT Ground Strip

Case

Can't find something? Contact Us

Description

The compact Next Generation NX5 is the most versatile tester to address transient and power fail requirements for both international and commercial standards.

Featuring an easy-to-use color touch screen, the NX5 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing and CE Marking. Its internal single-phase Coupling/Decoupling Network (CDN) can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 A per phase. EM TEST supplies a large range of accessories for various applications such as magnetic field tests and more.

Benefits

The compact NX5 is a standalone generator which includes everything necessary to perform fully compliant tests. With separate power mains supply inputs, it allows the utilization of different EUT supply voltages for maximum flexibility.

The NX5 can be operated manually from the intuitive front touch screen or remotely via its built-in Ethernet, USB or optical interface. Failure inputs allow control of an ongoing test sequence based on the state of the EUT. Monitoring outputs (BNC) offer easy signal verification and measurements. For enhanced safety requirements, features like interlock and a warning lamp are available.

NX5 is the first generator that recognizes the connected EUT power configuration. Only coupling selections to active lines are enabled. Non existing lines will be disabled from the menu settings. Pre-programmed routines with common Test Standards allow maximum user convenience. Quick Start Test routines where parameters can be changed during susceptibility level evaluation are also available.

General Data
Interfaces:
Serial interface: 2 x USB A for memory stick,
1 x USB B for service only,
Opto - Link to USB for remote
Lan: Ethernet for remote
Analog output: 0 - 10 VDC to control an external transformer
Sys.link: 26 pin high density connector to control an external coupling network
Fail inputs: EUT monitoring via input (one each)
EUT Monitor 1
EUT Monitor 2
Ext. Trigger: BNC Ext. Trigger IN pos slope 5 V
Ext. Sync Input: Differential input,
50 V - 690 VAC,
2 x 4 mm MC Safety connectors
Dimensions and Weight:
16 A models: 19"/3 HU, 500 mm deep, approx. 21.8 kg
32 A models: 19"/6 HU, 500 mm deep, approx. 40 kg
Environment:
Temperature: 10 C to 35 C
Humidity: 30 % to 75 %, non condensing
Atmospheric pressure: 86 kPa (860 mbar) to 106 kPa (1,060 mbar)
Mains:
Supply voltage: 85 V - 264 V
Frequency: 50/60 Hz
Power: approx. 75 W
Fuses: 115 V: 2 x 4 A slow blow, 230 V: 2 x 2 A slow blow
Safety:
Safety standard: IEC/EN 61010
Security circuit: Control input (24 VDC)
Warning lamp: Floating contact (max. 60 V/2 A)
Accessories Included:
Mains supply: Plug depends on the country of use
EUT supply: Plug depends on the country of use
EUT adapter: Socket depends on the country of use
Operation manual
Calibration certificate
iec.control remote control software
Specifications:
Burst Module: As per IEC/EN 61000-4-4 and EN 61000-6-1, -6-2
Test voltage: 200 V - 5,500 V +/- 10%; 100 V - 2,750 V +/- 10% into 50 ohm
Pulse shape: 5/50 ns into 50 ohm and 1,000 ohm
Rise time tr: 5 ns +/-30% into 50 ohm;
5 ns+/ 30% into 1,000 ohm
Pulse width td: 50 ns +/-30% into 50 ohm;
50 ns -15/+100 ns into 1,000 ohm
Source impedance: 50 ohm
Polarity: Positive/negative
Trigger Circuit:
Trigger of bursts: Automatic, manual, external
Synchronization: 0 - 360 Degree, resolution 1 Degree (16 - 500 Hz)
Burst duration (td): td = 0.10 ms - 9,999 ms
Repetition rate (tr): tr = 10 ms - 9,999 ms
Spike frequency: f = 1 Hz - 1,000 kHz
Test duration: T = 0:01 min - 99:59 min
T > 99:59 min --> endless
Outputs:
Direct: Via 50 ohm coaxial connector
Coupling mode: L, N, PE; all combinations
EUT supply: AC: 300 V / 400 V, 50/60 Hz
DC: 300 V / 400 V,
Current: 16 A / 32 A
CRO trigger: 5 V trigger signal for oscilloscope
Test Routines:
Quick Start: On-line adjustable parameters, easy-to-use
Standard Test routines: As per IEC/EN 61000-4-4, Levels 1 - 4
As per IEC/EN 61000-6-1, -6-2
As per ECE R-10 Rev5
Extended Test routines: Change voltage after T,
Frequency sweep within one burst,
Frequency sweep with constant number of pulses,
Frequency sweep with constant burst duration,
Synchronous burst release,
Random burst release
Combination Wave Surge:

Surge Module: As per IEC/EN 61000-4-5 and IEC/EN 61000-6-1, -6-2
Voltage (o.c.): 160 V - 5,000 V +/- 10%
Pulse front time: 1.2 us +/- 30%
Pulse duration: 50 us +/- 20%
Current (s.c.): Max. 2,500 A +/- 10%
Pulse front time: 8 us +/- 20%
Pulse duration: 20 us +/- 20%
Polarity: Positive/negative/alternating
Trigger Circuit:
Release of pulses: Automatic, manual, external
Synchronization: 0 - 360 degrees, resolution 1 degree
Repetition rate: max. 1 Hz (1 s - 9,999 s)
Event counter: 1 - 99,999, selectable
Outputs:
Direct: Via HV connectors for external coupling networks
Coupling mode: Line to line
Line(s) to ground
EUT supply: AC: 300 V / 400 V,
50/60 Hz DC: 300 V / 400 V,
Current: 16 A / 32 A
CRO trigger: 5 V trigger signal for oscilloscope
Measurements
CRO U-monitor: 10 Vp at 5,000 V
CRO I-monitor: 10 Vp at 2,500 A
Peak voltage: 5,000 V in the touch display
Peak current: 2,500 A in the touch display
Overcurrent protection: Breaks the Surge test when the surge current is over the limit,
Limiter for differential mode,
Limiter for common mode
EUT current: RMS current, Range 50 A, < +/-5%
EUT overcurrent protection: Breaks the test when the EUT current is over the limit,
Test Routines:
Quick Start: One-line adjustable parameters, easy-to-use
Standard Test routines: As per IEC/EN 61000-4-5,
As per IEC/EN 61000-6-1,
As per IEC/EN 61000-6-2,
Manual Standard Test routine
Extended Test routines: Voltage iteration after n pulses,
Angle iteration stepwise,
Phase angle random iteration,
Change coupling after n pulses,
Change phase angle after n pulses
Pulsed Magnetic Field: as per IEC/EN 61000-4-9
Test levels 100, 300 and 1,000A/m
Test level continuously adjustable under Quick Start
Power Fail:
As per: IEC/EN 61000-4-11,
IEC/EN 61000-4-29
and IEC/EN 61000-6-1, -6-2
Channel PF1/PF2: AC voltage: max. 300 V / 400 V
AC current: max. 16 A / 32 A
DC voltage: max. 300 V / 400 V
DC current: max. 16 A / 32 A
Frequency: 16 Hz - 500 Hz and DC
Switching time: > 1 us < 5 us into a 100 ohm resistive load (SVP 100)
Inrush current: > 500 A
Protection: Both channels are protected against short-circuit conditions.
Trigger Circuit:
Trigger of events: Automatic, manual, external
Synchronization: 0 - 360 degrees, resolution 1 degree (16 - 500 Hz)
Repetition rate: 10 ms - 9,999 s
Event duration: 10 us - 99.999 s
Event counter: 1 - 99,999, selectable
Outputs:
EUT terminals: L, N and PE
CRO trigger: 5 V trigger signal for oscilloscope
Measurements:
EUT voltage (rms): In the touch screen
EUT current (rms): In the touch screen
MON V: Measurement of the EUT voltage, built-in divider:
300 V: 42,5:1, 10 V =425 Vpk,
400 V: 56.6:1, 10 V =566 Vpk
MON I: Measurement of the EUT current,
16 A: 7 A/V; 10 V =70 Apk,
32 A: 10 A/V; 10 V =100 Apk
Test Routines:
Quick Start: On-line adjustable parameters, easy-to-use
Standard Test routines: As per IEC/EN 61000-4-11 for AC supplies
As per IEC/EN 61000-4-29 for DC supplies
As per EN 61000-6-1, -6-2 Manual Standard Test routine
Extended Test routines: Voltage variation, control of an external variac,
Phase angle iteration, Reduced time iteration,
Angle inverse mode, Random by step and list Inverse mode
50/60 Hz magnetic field: As per IEC/EN 61000-4-8 Test levels 1, 3, 10 and 30 A/m with external current transformer MC 2630, Test levels 100, 300 and 1,000 A/m with external current transformer MC 26100

EFT/Burst Table Top Setup

When using the coupling clamp, the minimum distance between the coupling plates and all other conductive surfaces (including the generator), except the ground reference plane beneath the coupling clamp and beneath the EUT, shall be at least 0.5 m.

The test generator and the coupling network should be connected to the reference ground plane (acc. to high frequency requirements).
- The equipment under test must be isolated from the reference ground plane. The distance should be 10 cm.
Being part of the EUT, these requirements are also recommended for all connected cables. The EUT should only be grounded if this is recommended by the installation guideline. For safety reasons, the test without any ground connection should be conducted as well (at 100MHz 1 m ground cable lenght has an impedance of about 600 Ω)
- Whenever possible the test set-up and the cabling should always be the same; e.g. for testing power lines it would be possible to fix the cables on the test table for all tests in the same way.
- Lines under test and all other lines should be decoupled strictly.

EM Test NX5 Configurations

The compact NX5 test system is a multifunction compact generator that simulates conducted electromagnetic interference effects for immunity testing according to international, national, and manufacturers’ standards. The system is designed for full compliance conducted electromagnetic compatibility (EMC) test requirements. The application range is for testing of industrial, light industrial, household or
commercial equipment, including many product family and product standards as
per following basic standards:

IEC 61000-4-4 EFT / Burst
IEC 61000-4-5 Surge
IEC 61000-4-8 50/60Hz Magnetic Field
IEC 61000-4-9 Pulse Magnetic Field
IEC 61000-4-11 Voltage Dips, Voltage Interruptions for ac power mains supply
IEC 61000-4-29 Voltage Interruptions Voltage Dips for dc power supply systems

EM Test NX5 Datasheet

Download

EM Test NX5 User Manual

Download

2 files

FAQs

The exact capabilities of each test system will depend on the model ordered. However, in its most common configuration, the bsp-1-300-16, it will have capabilities for combination wave surge testing, EFT/Burst testing, as well as power-fail testing, which typically requires external equipment.

Yes. The EM Test NX5 has a built-in coupling decoupling network (CDN), however it can be ordered up to a maximum of 400 Volts, 32 Amps for single-phase applications. However, in its most common configuration, the bsp-1-300-16, it is limited to 300 Volts 16 Amps. It’s worth noting that some higher power CDNs require 400 Volt models.

The compact NX5 can provide capabilities up to 5 kV for combination wave surge testing to IEC 61000-4-5 and 5.5 kV for EFT or Burst testing to IEC 61000-4-4.

Yes. For testing three-phase applications, an external coupling decoupling network (CDN) would be required. Depending on the voltage and current requirements for the EUT, this will determine which CDN and corresponding transient generator will be best suited for testing.

Yes. This test system can be used for EFT/Burst testing to IEC 61000-4-4 with a capacitive coupling clamp, as well as testing to combination wave surges to IEC 61000-4-5 with an external CDN designed for the type of data line being tested.

Rent the EM Test NX5 bsp-1-300-16

Weekly, two-week and monthly rentals available.

Questions?630-887-0329

EM Test IEC Test Equipment

Get the Right Accessories for Testing

Pair your rental EM Test NX5 or NX7 with compatible CDNs and accessories for mains, signal-line, and power-quality testing. We’ll help configure the equipment for your EUT and required test standard.