Home > Transient Generator Rentals > EM Test OCS 500N6.1
EM Test OCS 500N6.1 - Front Stock EM Test OCS 500N6.1 - Front EM Test OCS 500N6.1 - Rent Slow Oscillatory Wave Generator EM Test OCS 500N6.1 - Front Top EM Test OCS 500N6.1 - Front side
EM Test OCS 500N6.1 - Front Stock
EM Test OCS 500N6.1 - Front
EM Test OCS 500N6.1 - Front Top
EM Test OCS 500N6.1 - Front side

EM Test OCS 500N6.1

Rent Slow Oscillatory Wave Generator
  • 100 kHz & 1 MHz 3 kV Waveform Generator
  • Built-in Single-Phase CDN 250 V/ 16 A AC & DC
  • Compliant to ANSI C37.90 & IEC 61000-4-18
  • Antenna for IEC 61000-4-10 Available
  • Current ISO 17025 Accredited Calibration
Got Questions? Speak to an Expert +1 630-887-0329
Two FREE days transit with every rental

Related Equipment

EMC Partner DOW3000 Front Side EMC Partner DOW3000 Front
EMC Partner DOW3000
Rent Fast Damped Oscillatory Generator
In Stock
EMC Partner MIG-OS-OS1 Front Side EMC Partner MIG-OS-OS1 Front
EMC Partner MIG-OS-OS1
Rent Slow Oscillatory Wave Generator
CDN 2000-06-25 - Side CDN 2000-06-25 - Front
EMC Partner CDN 2000-06-25
Rent 3-Phase 480 Volt 25 Amp CDN
In Stock
Ametek MFC 1000.1 - Front Side Ametek MFC 1000.1 - Front
Ametek MFC 1000.1
Rent Magnetic Field Antenna
In Stock
EM Test Compact NX7 Front Side EM Test Compact NX7 Front
EM Test NX7 bspr-1-300-16
Rent 7 kV Compact Transient Generator
In Stock
EM Test MFT 100 - Front Side EM Test MFT 100 - Front
EM Test MFT 100
Rent 1,000 A/m Magnetic Field Transformer

Description 

The OCS 500N6 includes test capabilities for ringwave up to 6kV (as per EN/IEC 61000-4-12) and the damped oscillatory waves at 100 kHz and 1 MHz up to 3 kV (as per EN/IEC 61000-4-18).

The Ringwave is a non-repetitive damped oscillatory transient occurring in low-voltage power, control and signal lines supplied by public and non-public networks. Damped Oscillatory Waves are repetitive transients mainly occurring in power, control and signal cables installed in high voltage and medium voltage stations.

The OCS 500N6 can also be used to perform magnetic field tests as required in EN/IEC 61000-4-10 using a magnetic field coil such as the MS 100N.

Specifications:
Model
OCS 500N6.1
Oscillation frequency:
100 kHz and 1 MHz +/- 10 %
Voltage (o.c.) at HV output
250 V - 3,000 V +/- 10 %
Voltage (o.c) at line output
250 V - 2,500 V +/- 10 %
Rise time
75 ns +/- 20 %
Decaying
Peak 5 to be > 50% of peak 1 value
Peak 10 to be < 50% of peak 1 value
Source impedance
200 ohm +/- 20 %
Polarity
Positive, negative
Repetition rate
Max. 50 /s for 100 kHz and Max. 500 /s for 1 MHz
Burst duration
At least 2 s
Trigger Circuit�
Release of pulses
Automatic, manual, external
Synchronization
0 - 360 degrees, resolution 1 degree
Output
Direct
Via HV-safety lab connectors
Coupling mode
Line to line Line(s) to ground (PE)
DUT supply 1ph-16 A
AC: 250 V/16 A; 50/60 Hz
DC: 250 V/16 A
CRO trigger
5 V trigger signal for oscilloscope
Test Routines
Quick Start
Immediate start; easy-to-use and fast
Standard Test routines
As per IEC 61000-4-10, Level 1 - 5
User Test routines
Change polarity after n pulses
Change coupling after n pulses
Change voltage after n pulses
Change phase angle after n pulses
General Data
Dimensions, weight
6 HU, approx. 28 kg (1-phase)
Supply voltage
115/230 V +10/-15%
Fuses
2 x T 2 AT (230 V);
2 x T 4 AT (115 V)
Related Videos
IEC 61000-4-8 EM Test Magnetic Field Test Equipment Overview
Documentation