Haefely Axos8 7kV Surge, 5kV EFT, and Ringwave Generator

Haefely 7kV Transient Generator:

  • Conifgured 7kV Surge & Ring & 5.5kV EFT/Burst
  • Built-in 264v/16a AC & 220v/15a DC CDN 
  • Front Panel Voltage & Current Monitoring Ports
  • Current ISO 17025 Cal & 2 Days Free Transit Time
  • External 3-Phase CDN (FP-COMB 32) Rentals

Options/Equipment


Included Items, View Packing List

Got Questions about the equipment? Get technical support

Two FREE days transit time with every rental

Request A Quote

Haefely AXOS Associated EMI Equipment

AXOS8 Video Guides

AXOS8 System Overview

This video on the Haefely 7kV transient test system includes introduction, setup instructions, and modifications of testing parameters all done through the front panel interface of the system.

Haefely AXOS Platform Overview

This video provided by Haefely, the manufacturer of the AXOS5 and AXOS8 test system, provides system information about connections both through the front and back of the test system.

Data SheetUser Manual

Overview

 

The Haefely Axos8 conducted immunity test generator allow for 6kV surge/combination wave testing, 5kV EFT/Burst, and a 7kV Ringwave (optional Dips and Interrupts are availible) and a built-in single phase coupler. This test systems is the higher voltage version of the Axos 5, including a Ringwave Function. 

This Immunity Test Generator expandable functionality allows for quick and completely automated testing to the most common IEC, EN, ANSI, IEEE and UL standards. This test equipment is user friendly with manual and automated test mode and software assisted test preparation. It provides a touch screen for  efficient and effective manipulation of testing criteria to meet or a diverse set of testing needs. Both Axos units have front panel monitoring ports with built in attenuation allowing for quick ability to verify waveform.

This pulse generator allows for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12 and optional external box for testing per EN/IEC 61000-4-11 and EN IEC 61000-4-29. The Axos unit can either be operated via front panel by large colour graphic interface or remotely from the PC. This product has the ability to change testing parameters while conducting tests and is useful for monitoring and debugging function during design phase as well as compliance and pre-compliance testing.

Specifications

Common Standards

EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12

 (Optional: EN/IEC 61000-4-11 & EN IEC 61000-4-29)

General Data

 

Control Power

85V – 264V, 50/60 Hz

External Trigger Input

5 VTTL

Trigger Output

5 VTTL


Sync Input

BNC 10 V – 264 V AC

Dimensions

45 x 18 x 49cm, 17.11 x 7.02 x 19.29 inches

Weight

25kg, 55 lbs

IEC/EN 61000-4-4 Burst/EFT

 

Output Voltage

0.2 – 5.0 kV ±10%

Output Impedance

50 Ohms

Rise Time

5 ns ± 30%

Impluse Duration

50 ns ±30% at 50 ohms, 50 ns – 15 + 100 ns at 1,000 Ohm

Spike Frequency

1 Hz – 1 MHz

Burst Duration

10 µs – 1 s

Burst Period

1 ms – 10 s

Test Time

1 s – 1,000 minutes

Integrated single phase coupling/decoupling network

264 V AC/16 A

220 V DC/10 A

IEC/EN 61000-4-5 Surge Waveform

 

Max  Voltage

0.2 – 7.0 kV ± 10%

Voltage Rise Time

1.2 µs ± 30%

Voltage Duration

50 µs ± 20%

Output Impedance

2 Ohms

Phase Sync

0 - 359°with 1° steps or asynchronous mode

Output Current

0.1 – 2.5 kA ±10%

Current Rise Time

8 µs ± 20%

Current Duration

20 µs ± 20%

Integrated single phase CDN

264 V AC/16 A, 220 V DC/10 A

IEC/EN 61000-4-11 Dips & Interrupts

Also IEC / EN 61000-4-29

Max  Voltage

264V AC/DC

Max Current

16 A AC/DC continuous, 40 A for 3 seconds

Interupt Dip Level

0%, 0% - 99% with external voltage source

Interrupt Time

.5 period – 800 periods, 100 µs – 1000 minutes

Interval Time

1 period – 800 periods, 100 µs – 1000 minutes - asynch

Test Time

1 s – 1000 minutes

Phase Sync

0-359 degress 16/40/50/60 Hz

RMS Voltage and Current Monitor

BNC output 100:1V – 10A/V

IEC/EN 61000-4-12 Ed. 2 Ring Wave

 

Max  Voltage

0.2 – 7.0 kV ± 10%

Frequency

100 kHz

Rise Time 

OC 5 µs; SC 1 µs

Impedance

12 Ohm, 30 Ohm

Phase Sync Accuracy

± 1 degree

Repetition Rate

Up to 30 pulses / min

All Accessories

Item Capabilities
DIP 116 Automatic Dips Transformer 16 A 40/70/80%
FP-EFT 32M

3-Phase CDN EFT/Burst 32 A / 690 V

FP-EFT 100M2

3-Phase CDN EFT/Burst 100 A / 690 V

IP4B Capacitive Coupling Clamp for EFT/Burst 

FP-COMB 32

Automatic 3-Phase / 32A CDN Surge and EFT/Burst 2

FP-SURGE 100M2

3-Phase CDN Surge 100A / 690 V

PCD 121

Symmetrical Data & Control Line Coupler

PCD 126A

Asymmetrical Data & Control Line Coupler

DEC 5

Symmetrical Data & Control Line Decoupler

DEC 6

Symmetrical Data & Control Line Decoupler

DEC 7

Asymmetrical Data & Control Line Decoupler

MSURGE-A

Magnetic Field Test IEC / EN 61000-4-9

VTM 15000

Isolation Test 1.2/50 us up to 10 kV

VTM 15000/05

Isolation Test 1.2/50 us up to 10 kV / 0.5J

PDP 8000

HV Differential Probe 1000:1 for Surge

CP 101

Current Probe Model for Surge

ES

External Emergency Stop Switch P12

WL

External Warning Lamp P12

 

Standards

Axos 8 Testing Standards:

  • IEC/EN 61000-4-4 EFT / Burst
  • IEC/EN 61000-4-5 Surge Edition 2 & 3
  • IEC/EN 61000-4-9 Imp Magnetic Field
  • IEC/EN 61000-4-11 AC Dips and Interrupts
  • IEC/EN 61000-4-29 DC Dips and Interrupts
  • IEC/EN 61000-6-1 Generic Residential
  • IEC/EN 61000-6-2 Generic Industrial
  • IEC/EN 60335-1 Household
  • IEC/EN 60601-1 Medical
  • and many more

Video

Axos8 - Capabilities, Setup, & Software: Transient Specialists

Description: This video is an overview of the Axos8 multi function conducted immunity generator. It provides a basic overview, including capabilities, how to setup the equipment, and additional testing considerations. This video also includes changing testing parameters through the software providing insight into how testing is conducted with this Haefely conducted immunity generator. 

 

You may also like

Recently viewed