Teseq Test Equipment Rentals

Rent Teseq test equipment including ESD simulators, transient generators, and many others from Transient Specialists. Our inventory includes ISO 17025 equipment and allows for testing a variety of different power and data lines.

Related:
Showing 17 - 32 of 67 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
CI EOS 1 - Front CI EOS 1 - Side
California Instruments EOS1 - Rent IEC 61000-4-11 Electronic Switch
  • Compliant for IEC 61000-4-11 Testing
  • Used with California Instruments iX Supplies
  • Designed for Voltage Dips & Interruptions 
In Stock
Teseq CDN 3083-S100 - Front Side Teseq CDN 3083-S100 - Side Above
Teseq CDN 3083-S100 - Rent 3-Phase 100 Amp Surge CDN
  • Coupler for Surge to IEC 61000-4-5
  • Max 100 Amps 690 V AC or 620 V DC
  • Manual Coupler for NSG 3060 or NSG 3040
Buy Used-$17,000
In Stock
Teseq INA 6502 - Front Side Teseq INA 6502 - Side
Teseq INA 6502 - Rent Automatic Dips Transformer
  • Single Phase Automatic Step Transformer
  • Maximum 250 Volts 16 Amps
  • Designed for Teseq NSG 3060 & NSG 3040
In Stock
Teseq CDN 3425 Front Side Teseq CDN 3425 Side Top
Teseq CDN 3425 - Capacitive Coupling Clamp Rental
  • Complies with IEC 61000-4-4 Ed 2 & 3
  • Maximum Burst Voltage 8 kV
  • Used for Test EFT/Burst on Data Lines
In Stock
Teseq CAS 3025 - Attenuators Teseq CAS 3025 - Case & Accessories
Teseq CAS 3025 - Rent Burst/EFT Pulse Verification Kit
  • Verification/calibration Kit for IEC 61000-4-4
  • INA 265B 50 Ohm & INA 266A 1 k Ohm Termination
  • For peak voltages up to 8.8 kV
In Stock
Teseq NSG 438 Simulator Front Side Teseq NSG 438 Simulator screen
Teseq NSG 438 - 30 kV Battery Powered ESD Simulator
  • 30 kV Air & Contact Discharge (100V Steps)
  • Rechargeable Battery Powered ESD Simulator
  • Includes 150 pF/ 330 Ohm Network (INA 4380)
Monthly Rental-$595
Choose options
In Stock
EM Test NX30 Front with Base Station EM Test ESD NX30 Simulator Base Station
EM Test ESD NX30 - 30 kV ESD Simulator w/ Charge Removal
  • 30V Air & Contact Discharge (100V Steps)
  • Rechargeable Battery Powered ESD Simulator
  • Includes 150 pF/ 330 Ohm Network (INA 4380)
Teseq KEMZ 801A - Front Side Open Teseq KEMZ 801A - Side Open
Teseq KEMZ 801A - Rent 1 GHz 100 Watt EM Clamp
  • Frequency Range 10 kHz to 1 GHz
  • Includes CAL 801A  Calibration Adapter 
  • 10 kHz - 230 MHz 100 Watts Maximum
In Stock
Teseq CBA 1G-300B - Rent 300 W 80 MHz - 1 GHz Amplifier CBA 1G-300 - Front
Teseq CBA 1G-300B - Rent 300 W 80 MHz - 1 GHz Amplifier
  • 80 MHz - 1 GHz 300 Watts Psat (min)
  • 250 Watts Power P1dB (min)
  • Class A Operation & Front Panel Display
Teseq CBA 1G-150D - Front Side Teseq CBA 1G-150D - Rent 150 W RF Amplifier 80 MHz - 1 GHz
Teseq CBA 1G-150D - Rent 150 W RF Amplifier 80 MHz - 1 GHz
  • 80 MHz - 1 GHz 150 Watts Psat (min)
  • 125 Watts Power P1dB (min)
  • Class A Operation & Front Panel Display
Buy Used-$13,000
In Stock
Teseq CBA 400M-110 - Front side Teseq CBA 400M-110 - Front
Teseq CBA 400M-110 - Rent 110W 10 kHz - 400 MHz RF Amplifier
  • 10 kHz - 400 MHz 110 Watts Psat (min)
  • 80 Watts Power P1dB (min)
  • Class A Operation & Ethernet Control
In Stock
Teseq NSG 1007-5 - Rent 5kVA AC & DC Supply
Teseq NSG 1007-5 - Rent 5kVA AC & DC Supply
  • Single Phase High Effeciency AC/DC Supply 
  • Max 300 Volts AC & 400 Volts DC
  • Frequency Range 16 Hz - 1 kHz
EM Test ESD NX30-Auto - 30kV ESD Simulator w/ Charge Removal EM Test ESD NX30-Auto - 30kV ESD Simulator w/ Charge Removal
EM Test ESD NX30-Auto - 30kV ESD Simulator w/ Charge Removal
  • 30V Air & Contact Discharge (100V Steps)
  • Rechargeable Battery Powered ESD Simulator
  • Auto Variation Includes 3 Automotive Networks
Teseq IMN2 - Side Teseq IMN2 - Front
Teseq IMN2 Impedance Matching Network - Surge impulse Generators
  • Impulse Range: Up to 8,000 V and 4,000 A
  • IEC 61000-4-5 Ed.3 Pulse Impedance Matching
In Stock
Teseq CDN 3153-S63 - Front Side Teseq CDN 3153-S63 - Front Top
Teseq CDN 3153-S63 - Rent 3-Phase CDN NSG 3150
  • Max: 690 Volts Phase to Phase, 63 Amps
  • Rented with Teseq NSG 3150 Test System
  • Compliant for IEC 61000-4-5 Coupling Methods
In Stock
Teseq CIP 9136A Front Side Teseq CIP 9136A Front
Teseq CIP 9136A - Rent 400 MHz Current Injection Probe
  • Frequency Range 4 kHz - 400 MHz
  • Compliant to IEC, ISO, & MIL-STD Tests
  • High power handling (up to 1 kW)
In Stock