Showing 17 - 32 of 69 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
Teseq CDN HSS-2 Front Side Teseq CDN HSS-2 Side
Teseq CDN HSS-2 - Rent Symmetrical High-Speed Data CDN
  • CDN for up to 8 wire unshielded twisted pair (UTP)
  • Max Surge Voltage 2 kV Current 50 Amps
  • Coupling to 1, 2 or 4 pairs
In Stock
Teseq CDN 3083-S100 - Front Side Teseq CDN 3083-S100 - Side Above
Teseq CDN 3083-S100 - Rent 3-Phase 100 Amp Surge CDN
  • Coupler for Surge to IEC 61000-4-5
  • Max 100 Amps 690 V AC or 620 V DC
  • Manual Coupler for NSG 3060 or NSG 3040
Buy Used-$17,000
In Stock
Teseq CDN 3063 - Front Side Teseq CDN 3063 - Rent 3-Phase 480 Volt 32 Amp CDN
Teseq CDN 3063 - Rent 3-Phase 480 Volt 32 Amp CDN
  • Coupler for Surge, EFT, & Ringwave Pulses
  • Maximum 480 Volts 32 Amps AC/DC
  • Automatic Coupler for NSG 3060/NSG 3040
Buy Used-$11,000
In Stock
Teseq CDN 3061 - Front Top Teseq CDN 3061 - Front
Teseq CDN 3061 - Rent Single-Phase 16 Amp CDN
  • Coupler for Surge, EFT, & Ringwave Pulses
  • Maximum 270 Volts 16 Amps AC/DC
  • Rented with Teseq NSG 3060 Test System
In Stock
Teseq NSG 3040 - Rent 4.4 kV Surge 4.8 kV EFT Generator Teseq NSG 3040 - Rent 4.4 kV Surge 4.8 kV EFT Generator
Teseq NSG 3040 - Rent 4.4 kV Surge 4.8 kV EFT Generator
  • 4.4 kV Surge & 4.8 EFT Immunity Test System
  • Built-in single phase CDN Max 260 V/16 A AC or DC
  • Model/Version: NSG 3040-IEC
In Stock
EM Test CNV 504N1.3 - Front Side EM Test CNV 504N1.3 - Front
EM Test CNV 504N1.3 - Rent Unsymmetrical Unshielded CDN
  • CDN for 4 Unshielded Unsymmetrical Lines
  • Coupler for Surge & Ringwave Transients
  • Maximum Impulse Voltage 4 kV
In Stock
EMC Partner DN1 - Front Side EMC Partner DN1 - Side
EMC Partner DN1 - Rent 30 kV 150 pF/330 Ω Discharge Network
  • 30 kV 150 pF/330 Ω Discharge Network
  • Used with ESD3000 ESD Simulator
  • Requires RM32 Relay Module
In Stock
EM Test Dito Side Front Logo EM Test Dito Front Screen
EM Test Dito - Rent & Buy 16 kV ESD Simulator
  • 16 kV Air & 10 kV Contact Discharge (10 V Steps)
  • Light Weight Ergonomic Design
  • 150 pF/ 330 Ohm Network Installed
Monthly Rental-$295
Choose options
In Stock
EMC Partner ESD3000 Side Front EMC Partner ESD3000 Display
EMC Partner ESD3000 - Rent 16 kV ESD Simulator/Gun
  • 16 kV Air Discharge & 10 kV Contact-discharge (100 V Steps)
  • Rechargeable Battery Powered ESD Simulator
  • Includes DM1 150pF / 330Ω Network for IEC 61000-4-2 Testing
Monthly Rental-$295
Choose options
Teseq NSG 438 Simulator Front Side Teseq NSG 438 Simulator screen
Teseq NSG 438 - 30 kV Battery Powered ESD Simulator
  • 30 kV Air & Contact Discharge (100V Steps)
  • Rechargeable Battery Powered ESD Simulator
  • Includes 150 pF/ 330 Ohm Network (INA 4380)
Monthly Rental-$595
Choose options
EM Test NX30 Front with Base Station EM Test ESD NX30 Simulator Base Station
EM Test ESD NX30 - 30 kV ESD Simulator w/ Charge Removal
  • 30V Air & Contact Discharge (100V Steps)
  • Rechargeable Battery Powered ESD Simulator
  • Includes 150 pF/ 330 Ohm Network (INA 4380)
Teseq INA 6502 - Front Side Teseq INA 6502 - Side
Teseq INA 6502 - Rent Automatic Dips Transformer
  • Single Phase Automatic Step Transformer
  • Maximum 250 Volts 16 Amps
  • Designed for Teseq NSG 3060 & NSG 3040
In Stock
ECAT EP62 - Front ECAT EP62 - Side
Thermo Keytek ECAT EP62 - Rent & Buy IEC 61000-4-11 Module
  • Maximum 240 Volt & 32 Amps
  • Designed for IEC 61000-4-11 Testing
  • Must be used with E103 Control Unit
$8,000
In Stock
EM Test V4780 S2 - Front Side V4780 S2 - Front
EM Test V4780 S2 - Rent Single Phase Tapped Transformer
  • Single Phase Tapped Transformer
  • Maximum 250 Volts 16 Amps
  • Designed for EM Test NX & UCS 500 series
CI EOS 1 - Front CI EOS 1 - Side
California Instruments EOS1 - Rent IEC 61000-4-11 Electronic Switch
  • Compliant for IEC 61000-4-11 Testing
  • Used with California Instruments iX Supplies
  • Designed for Voltage Dips & Interruptions 
In Stock
Haefely DIP 116 Front Side Haefely DIP 116 Front
Haefely DIP 116 - Rent Automatic Dips Transformer
  • Single Phase Dips Transformer
  • Maximum 264 Volts 16 Amps
  • Designed for Haefely AXOS Series
In Stock