Showing 49 - 64 of 69 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
Teseq NSG 438A Front Side Teseq NSG 438A Side
Teseq NSG 438A - 30kV ESD Simulator w/ Charge Removal
  • 30 kV Air & Contact Discharge (100V Steps)
  • Rechargeable Battery Powered ESD Simulator
  • Charge Removal Feature Capabilities
In Stock
EM Test EAS 30 Front EM Test EAS 30 Connectors
EM Test EAS 30 - ESD Grounding/Bleeder Cable & Resistor
  • Bleed Off Cable Including HV Resistors 2X470 kΩ
  • Can be Purchased in .8 or 2 Meter Length
  • Max ESD Test Voltage 30 kV
In Stock
Teseq INA 102A
Teseq INA 102A - 50 Ohm Calibration Adapter MD 102A/103
  • 50 Ohms as Required by IEC 61000-4-2
  • Designed for Calibration of MD 102A/103
  • ISO 17025 Calibration Available
MD 102A & Cable MD 102A, Case, & Cable - Side
Teseq MD 102A - ESD Target for Waveform Verification
  • Current target as per IEC/EN 61000-4-2
  • Includes Target, Attenuator & Cable
  • Target for Precise ESD Pulse Measurements
ESD Test Setup - IEC 61000-4-2 Side Front ESD Test Setup - IEC 61000-4-2 Side
ESD Test Setup - Buy & Rent IEC 61000-4-2 Table Top
  • GCP, HCP, VCP, & Cables w/ Resistors 
  • For Full IEC 61000-4-2 Table Top Setup
  • Can be Purchased New/Used or Rented
In Stock
Teseq CDN 117A Front Side Teseq CDN 117A Front
Teseq CDN 117A - Rent 4 Line Unsymmetrical Surge CDN
  • CDN for 4 Unshielded Unsymmetrical Lines
  • Coupler for Surge & Ringwave Transients
  • Maximum Impulse Voltage 4.8 kV
Teseq NSG 3060A Front Side Teseq NSG 3060A Front
Teseq NSG 3060A - Teseq Transient Generator Test System
  • Configured for 6.6 kV Surge & 5.5 kV EFT/Burst
  • Built-in single phase CDN Max 300 V/16 A AC or DC
  • Model: NSG 3060A-IEC (IEC 61000-4-4/5)
In Stock
Rent Haefely ONYX 16 Front Side Rent Haefely ONYX 16 Side
Rent Haefely ONYX 16 kV ESD Simulator Test System
  • 16 kV Air Discharge & Contact Discharge (100 V Steps)
  • Simple Easy to Navigate Touch Screen
  • Predefined Test Routines According to Standards
Monthly Rental-$295
Choose options
In Stock
Coupling NX7 bsr-3-690-125.3 - 125Amp 3-Phase Surge & EFT CDN Coupling NX7 bsr-3-690-125.3 - 125Amp 3-Phase Surge & EFT CDN
Coupling NX7 bsr-3-690-125.3 - 125Amp 3-Phase Surge & EFT CDN
  • Coupler for Surge, EFT, & Ringwave Pulses
  • Max 125 Amps 690 V AC or 1,000 V DC
  • Transient Generator Mounted in Rack
Teseq ProfLine 2105 - Front Includes Desktop Teseq ProfLine 2105 - Front
Teseq ProfLine 2105 - 5 kVA Harmonics & Flicker Test System
  • Designed for Flicker & Harmonics Testing
  • Complete Test System for IEC 61000-3-2 and 3-3
  • Max Single Phase EUT 300 Volts 16 Amps
EM Test NX5 Front Side EM Test NX5 Front
EM Test NX5 bsp-1-400-16 - Rent Transient Generator 400V CDN
  • Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
  • Built-in single phase CDN Max 400 V/16 A AC or DC
  • Laptop with iec.control software included
EMC Partner IMU-MGS - Front Side EMC Partner IMU-MGS - Front
EMC Partner IMU-MGS - Rent 4 kV Surge & EFT Generator
  • 4.1 kV Surge & 4.4 kV EFT/Burst Generator 
  • Built-in CDN Max 300 Volts 16 Amps AC & DC
  • Model: IMU-MGS F4-S4-P
In Stock
EM Test VCP - Vertical Coupling Plane IEC 61000-4-2 EM Test VCP - Vertical Coupling Plane IEC 61000-4-2
EM Test VCP - Vertical Coupling Plane IEC 61000-4-2
  • Vertical Coupling Plane for IEC 61000-4-2
  • Includes one Bleed Off Cable with Resistors
  • Wood Stand with Tightening Clamp Included 
Teseq CN T8-DC - Front Side Teseq CN T8-DC - Front
Teseq CN T8-DC - Rent Data Line DC Coupling Network
  • Frequency Range: DC
  • Max 63 V AC or 100 V DC (200 mA per Line)
  • Rented with Common Mode Test System
In Stock
Teseq CN T8-AC - Front Side Teseq CN T8-AC - Front
Teseq CN T8-AC - Rent Data Line AC Coupling Network
  • Frequency Range: 15 Hz to 150 kHz
  • Max 63 V AC or 100 V DC (200 mA per Line)
  • Rented with Common Mode Test System
In Stock
EM Test PCD 8 S-3-690-1000-100 Front Side EM Test PCD 8 S-3-690-1000-100 Side
EM Test PCD 8 S-3-690-1000-100 - Rent 100Amp Manual Surge CDN
  • Coupler for Surge to IEC 61000-4-5
  • Max 100 Amps 690 V AC or 1,000 V DC
  • Manual Coupler for NX5/NX7 Systems
In Stock