Showing 129 - 144 of 314 products
Quick Access
Return Instructions

Standard Terms

Transient Specialists, Inc. (TSI)

Standard Terms & Conditions:

  • TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  • Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  • Payment terms are net 30 with credit approval. Non-payment or late payment of amounts due will result in interest charges of 1% per month and upon demand, return of the equipment.
  • The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  • In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem.  Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  • The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  • The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  • The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  • In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  • The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  • This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
  •  

    FAQ
    FCC Part 15 Pre-Compliance Emissions Kit Connected FCC Part 15 Pre-Compliance Emissions Side
    FCC Part 15 Pre-Compliance Emissions Kit - Rent Analyzer & LISN
    • Kit Includes Analyzer, LISN, & Transient Limiter
    • EMCO 3810 Max 125 Volts 10 Amps AC
    • Compliant for FCC Part 15 Subpart B
    Fischer BCI Test Package 10 kHz - 400 MHz Rental Fischer BCI Test Package 10 kHz - 400 MHz Rental
    Fischer BCI Test Package 10 kHz - 400 MHz Rental
    • 10 kHz to 400 MHz BCI Test Bundle
    • Includes F-120-6A Injection Probe
    • Designed for IEC, ISO, & MIL-STD Tests
    In Stock
    Fischer F-120-6A - Front label Fischer F-120-6A Side Open
    Fischer F-120-6A - Rent 400 MHz Current Injection Probe
    • Frequency Range 10 kHz - 400 MHz
    • Maximum Input Power 200 Watts
    • Typically Rent as Part of 400 MHz BCI Kit
    In Stock
    Fischer F-120-9A Front and Label Fischer F-120-9A Side Open
    Fischer F-120-9A - Rent 230 MHz Current Injection Probe
    • Frequency Range 10 kHz - 230 MHz
    • Maximum Input Power 100 Watts
    • Typically Rent as Part of 230 MHz BCI Kit
    Fischer F-33-1 Front Side Fischer F-33-1 Side
    Fischer F-33-1 - Rent 250 MHz Current Monitoring Probe
    • Frequency 10 kHz - 250 MHz 
    • Includes FCC-MPCF-3 Calibration Fixture
    • Internal Diameter of 32 mm
    Fischer F-33-2
    Fischer F-33-2 - Rent 250 MHz Current Monitoring Probe
    • Frequency 1 kHz - 250 MHz 
    • Includes FCC-MPCF-3 Calibration Fixture
    • Internal Diameter of 32 mm
    Monthly Rental- $300
    Choose options
    In Stock
    Fischer FCC-801-M2-M3-16A Front Side Fischer FCC-801-M2-M3-16A Side
    Fischer FCC-801-M2-M3-16A - Rent RF CDN 250 Volts 16 Amps
    • Frequency 150 kHz - 230 MHz
    • Max 250 Volts 16 Amps AC/DC
    • Designed for 2 or 3 Supply Lines
    In Stock
    Fluke 355 - Front Fluke 355 - Test Kit
    Fluke 355 - Rent 2000 Amp Clamp Meter
    • High Voltage Clamp Meter
    • Max 600 Volts AC & 1000 Volts DC
    • Current Measurements as High as 200 Amps
    GW Instek AEL-5006-425-56 - Front Side GW Instek AEL-5006-425-56 - Front Top
    GW Instek AEL-5006-425-56 - Rent 5.6 kW AC & DC Load
    • 5600 W Electronics Load with x2 Turbo Option
    • Max 56 Amps 425 VAC/600 VDC Continuous
    • Positive or Negative Half-cycle Loading
    In Stock
    Haefely AXOS 8 Front Side Haefely AXOS 8 Front
    Haefely AXOS 8 - Rent 7 kV Transient Test Generator
    • 7 kV Surge, 5.5 kV EFT, & 7 kV 100 kHz Ringwave
    • Built-in CDN Max 264 V/16 A AC or 220 V/10 A DC
    • Compliant to ANSI Coupling Requirements 
    Haefely AXOS5 - Front Side Haefely AXOS5 - Front
    Haefely AXOS5 - Rent 5 kV Surge & EFT Generator
    • 5 kV Surge & EFT Immunity Test System
    • Built-in CDN Max 264 V/16 A AC or 220 V/10 A DC
    • Capabilities for Voltage Dips Testing with DIP 116
    Monthly Rental- $1,400
    Choose options
    In Stock
    Haefely DIP 116 Front Side Haefely DIP 116 Front
    Haefely DIP 116 - Rent Automatic Dips Transformer
    • Single Phase Dips Transformer
    • Maximum 264 Volts 16 Amps
    • Designed for Haefely AXOS Series
    In Stock
    Haefely FP-COMB 32 Front Side Haefely FP-COMB 32 Front
    Haefely FP-COMB 32 - Rent 3-Phase 480 Volt 32 Amp CDN
    • Coupler for Surge, EFT, & Ringwave Pulses
    • Maximum 480 Volts 32 Amps AC/DC
    • Automatic Coupler for Axos5/8 Systems
    In Stock
    EMC Partner - DOW3000 & MIG-OS-OS1 EMC Partner - IEC 61000-4-18 System
    IEC 61000-4-18 DOW Test Systems Rental
    • EMC Partner Solution for IEC 61000-4-18 Testing
    • Includes MIG-OS-OS1 & DOW3000 Systems
    • Systems Include Built-in 3-Phase CDNs
    Teseq INA Discharge Network - Front Top Teseq INA Discharge Network - Front Side
    INA 4584 - 250 pF/1500 Ohm Discharge Network
    • 250 pF/1500 Ω Resistance Capacitance Network
    • Used with Teseq NSG 437 or NSG 438 Series
    • ISO 17025 Calibrations Available
    Custom ISO 10605 Coupling Fixture with Labels for Plane size
    ISO 10605 Custom ESD Field Coupling Fixture
    • Test Fixture for ISO 10605:2023-06 Annex F
    • Includes Field Coupling Plane & Isolation Block
    • Single Copper/Brass Sheet for Entire Setup