Products

Quick Access

Return Instructions

Standard Terms

Transient Specialists, Inc. (TSI)

Standard Terms & Conditions:

TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.

Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.

Payment terms are net 30 with credit approval. Non-payment or late payment of amounts due will result in interest charges of 1% per month and upon demand, return of the equipment.

The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.

In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.

The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.

The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.

The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.

In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.

The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.

This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.

FAQ

EMC Partner ESDEX30-ISO - Rent 30 kV Automotive Simulator

30 kV Testing for Air & Contact Discharge
Includes 4 Networks for ISO 10605 & OEM Tests
Pre-programmed Test Routines for IEC & ISO

In Stock

EMC Partner EXT-IMU C-SHORT - IMU Common Extension

Power Frequencies: DC, 16.67 Hz, 50 Hz, & 60 Hz
Output voltage 30 V – 330 V for 1000 seconds
Included with Common Mode Test System

EMC Partner IMU-MGS - Rent 4 kV Surge & EFT Generator

4.1 kV Surge & 4.4 kV EFT/Burst Generator
Built-in CDN Max 300 Volts 16 Amps AC & DC
Model: IMU-MGS F4-S4-P

Monthly Rental- $1,500

EMC Partner MIG-OS-OS1 & CDN 2000-06-25 - Side

EMC Partner MIG-OS-OS1 & CDN 2000-06-25 - Front

EMC Partner MIG-OS-OS1 - Rent Damped Oscillatory Test System

100 kHz & 1 MHz 3 kV DOW Generator
Includes EMC Partner CDN 2000-06-25
Maximum 480 Volts 25 Amps AC

EMC Partner MIG-OS-OS1 - Rent Slow Oscillatory Wave Generator

100 kHz & 1 MHz 3 kV DOW Generator
Rented with EMC Partner CDN 2000-06-25
Compliant to IEC 61000-4-18 Slow Pulses

EMC Partner MIL-MG3 - Rent MIL-STD & DO-160 Test System

Exceeds maximum test levels in MIL-STD-461
Single Generator for CS115 & CS116 Requirements
Automated Test Routines from Front Panel

In Stock

EMC Partner PS3 - 3kW Pre-Programmed Power Supply

Outputs: 230 V/50 Hz, 115 V/60 Hz, & 115 V/400 Hz
Compliant to IEC 61000-4-28 Frequency Variations
Included with Common Mode Test System

HV Technologies/EMC Partners RM32 - Relay Module For ESD 3000 ESD gun For 30kV and Automotive Networks

EMC Partner RM32 - ESD3000 30kV Relay Module

Required for 30 kV Testing
Connects Directly to Front of Simulator
Rented with EMC Partner ESD3000

In Stock

EMC Partner TRA3000 C - Front with Laptop

EMC Partner TRA3000 C - Rent Common Mode Test System

Frequency Sweep, Short, & Long Capabilities
Laptop with TRA3000 Included with System
Includes EMC Partner P3 & EXT-IMU C-SHORT

ESD Static Dissipation Brush - Front Side

ESD Static Dissipation Brush - IEC 61000-4-2 Charge Removal

Carbon Fiber Brush Designed for Charge Removal
Meets IEC 61000-4-2:2009 Requirements
2 x 470 kΩ 10 kV Dissipation Resistors

ESD Test Setup - IEC 61000-4-2 Side Front

ESD Test Setup - Buy & Rent IEC 61000-4-2 Table Top

GCP, HCP, VCP, & Cables w/ Resistors
For Full IEC 61000-4-2 Table Top Setup
Can be Purchased New/Used or Rented

In Stock

ES105 ESD Voltmeter & Accessories - Front

ESDEMC ES105 - Rent High-Resistance Electrostatic Voltmeter

Used for Air Discharge ESD Voltage Verification
Measure DC to 100kV (Similar to ESVM 2)
MIL-STD-461 CS118 Compliant

In Stock

ETS-Lindgren 3142E - Rent BiConiLog Antenna 30 MHz - 6 GHz

Frequency Range 30 MHz to 6 GHz
Current ISO 17025 Calibration w/ 3 Meter Data
Ideal for Sweeping Across Frequency Range

Monthly Rental- $900

In Stock

ETS-Lindgren HI-6006 - Rent 6 GHz E-Field Probe

Frequency Range 100 kHz - 6 GHz
Field Strength 0.5 - 800 V/m
Suitable for IEC 61000-4-3 Field Verification

In Stock

ETS-Lindgren/EMCO 3810/2NM - Rent 50µH 10Amp LISN

Frequency Range: 9 kHz to 30 MHz
Maximum 10 Amps 125 Volts AC
Inductors: 250 & 50 Microhenry (air-core)

Monthly Rental- $250

FCC Part 15 Pre-Compliance Emissions Kit - Rent Analyzer & LISN

Kit Includes Analyzer, LISN, & Transient Limiter
EMCO 3810 Max 125 Volts 10 Amps AC
Compliant for FCC Part 15 Subpart B