Products

Quick Access

Return Instructions

Standard Terms

Transient Specialists, Inc. (TSI)

Standard Terms & Conditions:

TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.

Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.

Payment terms are net 30 with credit approval. Non-payment or late payment of amounts due will result in interest charges of 1% per month and upon demand, return of the equipment.

The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.

In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.

The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.

The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.

The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.

In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.

The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.

This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.

FAQ

EMC Partner CDN 2000-06-25 - Rent 3-Phase 25 Amp CDN

Coupler for Damped Oscillatory Pulses
Maximum 480 Volts 25 Amps AC
Rented with MIG-OS-OS1 Generator

EMC Partner CN-BT7 - Indirect Lightning Injection Probe

Large aperture 5.5 cm x 8 cm
Rented With EMC Partner AVI System
Used as Coupler for 5 Waveforms

EMC Partner CN-EFT1000 - Rental Capacitive Coupling Clamp

IEC 61000-4-4 & IEC 61000-4-18 Compliant
Designed for Coupling to I/O Lines
Useable for Damped Oscillatory Wave Testing

Monthly Rental- $250

EMC Partner CN-GI-CI-V - Cable Bundle Voltage Injection Clamp

Designed for WF4, WF5A (voltage)
Level 5 for Single & Multiple Stroke Tests
Rented with AVI Test Generator

In Stock

EMC Partner CN16 - Coupler for Common Mode Testing

415 V AC/Sweep Tests & 115 V DC Tests
Manual Coupler for 1, 2 or 4 Power Lines
Rented with Common Mode Test System

EMC Partner DM1 - Rent 150 pf/ 330 ‎Ohm Discharge Module

16 kV Air & 10 kV Contact Discharge
150 pF/ 300 Ω Discharge Module
Used with ESD3000 ESD Simulator

EMC Partner DM4 - Rent 100 pF/ 1,500 Ω Discharge Network

16 kV Air & 10 kV Contact Discharge
100 pF/ 1,500 Ω Discharge Module
Used with ESD3000 ESD Simulator

EMC Partner DN1 - Rent 30 kV 150 pF/330 Ω Discharge Network

30 kV 150 pF/330 Ω Discharge Network
Used with ESD3000 ESD Simulator
Requires RM32 Relay Module

EMC Partner DN2 - Rent 330 pF/ 2 kΩ Discharge Network

30 kV 300 pF/2 kΩ Discharge Network
Used with ESD3000 ESD Simulator
Requires RM32 Relay Module

In Stock

EMC Partner DN3 - Rent 30 kV 150 pF/2 kΩ Discharge Network

30 kV 150 pF/2 kΩ Discharge Network
Used with ESD3000 ESD Simulator
Requires RM32 Relay Module

In Stock

EMC Partner DN6 - Rent 330 pF/ 330 Ω Discharge Network

30 kV 330 pF/330 kΩ Discharge Network
Used with ESD3000 ESD Simulator
Requires RM32 Relay Module

In Stock

EMC Partner DOW3000 - Rent Fast Damped Oscillatory Generator

3 MHz, 10 MHz, & 30 MHz 4 kV DOW Generator
Built-in CDN Max 690 V/32 A AC or 500 V/32 A DC
Compliant Test System IEC 61000-4-18

EMC Partner ESD-VERI-V - Rent ESD Voltage Divider

Allows for Voltage Level Verification
Designed for use with ESD3000 Simulator
Can be used with DMM or Oscilloscope

EMC Partner ESD3000 - Rent 16 kV ESD Simulator/Gun

16 kV Air Discharge & 10 kV Contact Discharge (100 V Steps)
Rechargeable Battery-Powered ESD Simulator
Includes DM-1 150pF / 330Ω Network for IEC 61000-4-2

Monthly Rental- $590

EMC Partner ESDEX16 - Rent 16kV ESD Simulator

16 kV Air Discharge & Contact Discharge (1V Steps)
Rechargeable Battery-Powered ESD Simulator
Pre-programmed Test Routines for IEC 61000-4-2

Monthly Rental- $590

EMC Partner ESDEX30 - Rent 30kV ESD Simulator

30 kV Air Discharge & Contact Discharge (1V Steps)
Rechargeable Battery-Powered ESD Simulator
Pre-programmed Test Routines for IEC 61000-4-2

Monthly Rental- $990

In Stock