EM Test Equipment Rental

Rent EM Test equipment designed for a variety of commercial and automotive testing requirements. Our inventory of ISO 17025 calibrated equipment includes capabilities for transient immunity on power lines up to 100 Amps.

Related:
Showing 33 - 48 of 50 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
EM Test VDS 200N15 - Front Side EM Test VDS 200N15 - Front
EM Test VDS 200N15 - Rent 15 Amp Battery Simulator
  • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
  • Maximum 60 Voltage 15 Amps
  • Voltage Drop Simulator with Low Output Impedance
OEM LV124 EM Test System - Front OEM LV124 Test System - Teseq & EM Test
OEM LV124 EM Test System - Rent Automotive Pulse Generators
  • Provides LV124 E-01 to E-15 Pulses 
  • DUT Capabilities up to 100 Amps 
  • Includes Software & Verification Kits
EM Test VDS 200N30 - Front Side EM Test VDS 200N30 - Front
EM Test VDS 200N30 - Rent 30 Amp Voltage Drop Simulator
  • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
  • Maximum 60 Voltage 30 Amps
  • Voltage Drop Simulator with Low Output Impedance
LV124 EM Test System - OEM Automotive Solution (100Amp)
LV124 EM Test System - OEM Automotive Solution (100Amp)
  • Many pulses of LV124/Other OEMs (100A)
  • Includes - Accessory Kit, Autowave & PA 5840
  • Rent PFM200N100 for Additional OEM Pulses 
EM Test AutoWave - Front Side EM Test AutoWave - Front
EM Test AutoWave - Rent 2 Channel Waveform Generator
  • 2-channel Arbitrary Waveform Generator
  • Dual-Processor-Technology, 500kS/s sample rate
  • Library of Standard Test Routines
EM Test VDS 200Q50.2 - Front Side EM Test VDS 200Q50.2 - Front
EM Test VDS 200Q50.2 - Rent 50 Amp Battery Simulator
  • -60 to +60 Volts 50 Amps Continuous
  • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
  • Extended Range 80 Volts 40 Amps
EM Test PCD 8 S-3-690-1000-100 Front Side EM Test PCD 8 S-3-690-1000-100 Side
EM Test PCD 8 S-3-690-1000-100 - Rent 100Amp Manual Surge CDN
  • Coupler for Surge to IEC 61000-4-5
  • Max 100 Amps 690 V AC or 1,000 V DC
  • Manual Coupler for NX5/NX7 Systems
In Stock
EM Test OCS 500N6.1 - Front Stock EM Test OCS 500N6.1 - Front
EM Test OCS 500N6.1 - Rent Slow Oscillatory Wave Generator
  • 100 kHz & 1 MHz 3 kV Waveform Generator
  • Built-in Single-Phase CDN 250 V/ 16 A AC & DC
  • Compliant to ANSI C37.90 & IEC 61000-4-18
EM Test VDS 200Q10 - Front Side EM Test VDS 200Q10 - Front
EM Test VDS 200Q10 - Rent 10 Amp Battery Simulator
  • -60 to +60 Volts 10 Amps Continuous
  • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
  • Four Quadrant, Bipolar Amplifier
In Stock
EM Test VDS 200Q100.2 - Front Side EM Test VDS 200Q100.2 - Front
EM Test VDS 200Q100.2 - Rent 100 Amp Battery Simulator/Source
  • -60 to +60 Volts 100 Amps Continuous
  • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
  • Extended Range 80 Volts 80 Amps
In Stock
Teseq CDN M5-100S - Front Side Teseq CDN M5-100S - Side
Teseq CDN M5-100S - Rent 3-Phase 100 Amp CDN
  • Frequency 150 kHz - 80 MHz
  • Max 500 V/100 A AC or 600 V/100 A DC
  • Designed for 5 AC Supply Lines
EM Test CA LV 148 - Front EM Test CA LV 148 - Front Side
EM Test CA LV 148 - Rent LV 148 Verification Kit for PFM 200N100
  • 10 Ohm & 100 Ohm Power Calibration Loads
  • Designed for up to 48 Volt Battery Lines
  • Low Inductive, High Precision Load Resistor
In Stock
EM Test PCD 8 B-3-690-1000-100 Front Side EM Test PCD 8 B-3-690-1000-100 Side
EM Test PCD 8 B-3-690-1000-100 - Rent 100Amp EFT/Burst CDN
  • Coupler for EFT/Burst to IEC 61000-4-4
  • Max 100 Amps 690 V AC or 1,000 V DC
  • Manual Coupler for NX5/NX7 Systems
In Stock
EM Test OPT AW-GMW3172 - Front Side EM Test OPT AW-GMW3172 - Side
EM Test OPT AW-GMW3172 - Superimposed Voltage Adapter Box
  • Requires Two Channels of Autowave
  • Designed for GMW3172 Superimposed Voltage
  • Configured using autowave.control Software
In Stock
EM Test Variac NX 1-260-16 - Front Side EM Test Variac NX 1-260-16 - Front
EM Test Variac NX 1-260-16 - Rent Single Phase Motor Variac
  • Single Phase Motor Variac
  • Capabilities for Voltage Dips & Variations
  • Maximum 260 Volts 16 Amps AC
In Stock
EM Test MFT 100 - Front Side EM Test MFT 100 - Front
EM Test MFT 100 - Rent 1,000 A/m Magnetic Field Transformer
  • Maximum Level up to 1,200 A/m
  • Input Voltage Drives H-Field Level
  • Used with External Power Source
In Stock