EMC/EMI Test Accessory Rentals - CIP, Setups, & Monitoring Devices
CDNs, Clamps, Injection Devices
Coupling Decoupling
Probes & Monitoring
HV Probes, Voltmeters, Etc.
ESD Test Accessories
Voltmeters, Tips, Targets
Automotive Accessories
Clamps, Networks, Setups
MIL-STD-461/DO-160 Equipment
CIP, LISN, Fixtures, Packages
Current Injection Probes
CIP & Fixtures BCI
- Designed Measurement of Surface Voltage
- Measure Range 0 to +/- 2kV
- Non-contacting Electrostatic Voltmeter
Sale price
Montly Rental -
$250
- Impulse Range: Up to 8,000 V and 4,000 A
- IEC 61000-4-5 Ed.3 Pulse Impedance Matching
- Power-Up ESD Test Setup to ISO 10605
- Copper Thickness & Size Adjustable
- Up to ±15 kV Differential or ±1.5 kV Common
- Attenuation 200x or 2000x, 50 MHz Bandwidth
- Rented with Teseq NSG 3150 Test System
- Frequency Range 4 kHz - 400 MHz
- Compliant to IEC, ISO, & MIL-STD Tests
- High power handling (up to 1 kW)
- Outputs: 230 V/50 Hz, 115 V/60 Hz, & 115 V/400 Hz
- Compliant to IEC 61000-4-28 Frequency Variations
- Included with Common Mode Test System
- Power Frequencies: DC, 16.67 Hz, 50 Hz, & 60 Hz
- Output voltage 30 V – 330 V for 1000 seconds
- Included with Common Mode Test System
- Maximum RMS Current 200 Amps
- Usable Rise time 100 Nanoseconds
- Sensitivity 0.01 Volt/Ampere +1/-0%
- CDN for 4 Unshielded Unsymmetrical Lines
- Coupler for Surge & Ringwave Transients
- Maximum Impulse Voltage 4.8 kV
- Construction as per IEC 61000-4-4 Ed.3
- EFT/Burst Testing of Signal- and Datalines
- Permissible Burst Voltage 7 kV
- Construction as per IEC 61000-4-4 Ed.3
- EFT/Burst testing of signal and data lines
- For cable diameter from 4 – 40 mm
- Frequency 10 kHz - 250 MHz
- Includes FCC-MPCF-3 Calibration Fixture
- Internal Diameter of 32 mm
- Frequency 10 kHz - 750 MHz
- Includes TBCP4-750 Calibration Fixture
- Internal Diameter of 32 mm
- 30 MHz to 1 GHz Biconical Measurement Antenna
- Small, Lightweight Device, & Includes Tripod
- Max Continuous RF Input Power: 2 Watts
- Frequency 1 kHz - 250 MHz
- Includes FCC-MPCF-3 Calibration Fixture
- Internal Diameter of 32 mm
- Adapter for Pulse Superimposed Voltage Tests
- Two +ARB Options Required in NSG 5500
- Designed for GMW 3172 Section 9.2.5
Overview
General Accessory Information
Accessories and associated equipment external of the main systems or equipment provides added capabilities and the ability to meet necessary test requirements. These can often be used to meet a specific section or requirement and may not be commonly used in conjunction with the system, making renting these accessories an ideal solutions. These can often be split up into many categories based upon application and use, often by active/passive use. Often times accessories are bundled into a package provide a complete solution for common testing.
Common Accessory Categories
- Monitoring Devices - Probes, Targets, & Verification Kits
- Injection Devices - CIP, CDNs, & Clamps
- Unique Test Setup Requirements - GCP, Tripods, & LISNs
- External Active Test Generators - Transients, Variacs, & Transformers
