Conducted RF Immunity Testing Rentals

Conducted RF Immunity Testing Rentals

Conducted radio frequency (RF) immunity refers to an electronic or electrical systems ability to function while receiving RF stress in the environment that the systems will function. As we continue to utilize more of the RF spectrum this immunity testing has grown in importance. There are many standards that test to for an electronic or electrical systems conducted RF Immunity including EN IEC 61000-4-6, MIL-STD-461 CS114, RTCA DO-160 sec 20, and many others. EN IEC 61000-4-6 falls under the basic publication of IEC 61000, which is general guidelines for EMC. EN IEC 61000-4-6 Conducted RF immunity Requirements
We rent conducted RF immunity test systems that replicate the radio frequencies that electrical and electronic equipment is tested to. We carry both Teseq and EM Test conducted RF products to accommodate testing needs. To facilitate testing we also rent a wide range of accessories allowing for increased testing capabilities. Our conducted RF immunity test equipment includes software which sweeps through the frequency ranges defined by the test specification (IEC 61000-4-5, Mil Std 461 cs114, DO 160 sec 20, and others), recording both calibration data and the data for the device under test. This automation allows easy and efficient testing for a wide range of applications.

Conducted RF Immunity Test Systems | EMI Test Equipment Rentals

Showing 1 to 9 of 11 products

RENTAL

NSG 4070 Rental - Teseq Conducted RF Immunity Test System per IEC 61000-4-6

The NSG 4070 by Teseq is a multi-functional device for carrying out EMC testing for conducted and radiated immunity. A2LA accredited calibration is included in the conducted RF generator rental price. The third generator of the NSG 4070 rental product provides efficient and effective means to create testing reports and connect EUT monitoring. 

This Conducted RF Immunity Test Generator modular set-up using internal or external amplifiers enables a large variety of applications. The powerful and easy to use firmware makes the NSG 4070 independent from an external PC and control software, however it can also be remote controlled for system operation. A state-of-the-art data transfer of test and measurement data for documentation is provided by USB stick to be plugged into the front pane 

The NSG 4070 was designed to testing in accordance to EN IEC 61000-4-6, EN IEC 60601-1-2, EN IEC 61000-4-20, EN IEC 61000-4-21 and several automotive standards. This immunity test product provides various sweep methods which can be selected to suit each particular testing parameter. The Teseq NSG 4070 conducted RF test equipment also allows for all coupling methods to be simply and easily connected and calibrated.

RENTAL

CWS 500N Rental - EM Test Conducted RF Immunity Test System per IEC 61000-4-6

The CWS 500N1.4 by EM Test is a compact single box for testing products for immunity to RF. This EM Test rental product includes includes a signal generator, amplifier and power meter, and dual directional coupler. A2LA accredited calibration is included in the conducted RF generator rental price.

This conducted RF immunity generator has a diverse range of applications for testing to the 1kHz 80% Am singal as well as a 2Hz 80% AM signal to test medical appliances. As an added bonus the CWS 500n1 provides a 1Hz PM signal with 50% duty cycle required for test safety equipment. The EM Test CWS 500n1 is also equipped with a 1 GHz current monitor the can be used up to 1 GHz by means of an external amplifier. 

The CWS 500N 1.4 was created to test to EN IEC 61000-4-6IEC 60601-1-2ISO 11452-4, and many others. This unique single box solution provides software allowing for many reprogrammed standards to be run efficiently. A diverse set of accessories are available for rent with the CWS 500N1 meeting any testing needs.

RENTAL

CWS500N2 Rental - EM Test Conducted RF Immunity per MIL-STD-461 CS114, DO-160 sec 20

The EM Test CWS 500N2 continuous wave simulator uses Bulk Current Injection (BCI) testing procedure to proof the immunity to electrical disturbances by narrowband electromagnetic energy. A2LA accredited calibration is included in the EMC rental equipment price. The CWS500N2 compact product includes a built-in 100W class A amplifier up to 400MHz.

This Military and Commercial EMC Test Equipment is designed to meet a variety of testing criteria with built in signal generator, amplifier and power meter, dual directional coupler.  Apart from the 1kHz 80% AM signal the CWS500N also generates a 2 Hz 80% AM signal to test medical appliances and a 1 Hz PM signal with 50% duty cycle required to test safety equipment like fire alarms. This product has an easy to use interface allowing users to select and modify testing criteria via turning knob on the front of the unit.

The CWS500N2 is a single box solution for testing products to RF per MIL-STD-461 CS114EN IEC 61000-4-6ISO 11452-4, RTCA DO-160 Sec 20 and many others. Equipped with a 1 GHz current monitor the CWS500N can be used up to 1 GHz by means of an external amplifier. Our EMC rental equipment includes the option of renting the accessory Bulk Current Injection Clamp (BCI) and other accessories required for CS11x series testing.

RENTAL

EM Test CDN AF4 - Conducted RF Immunity Testing For Unshielded, Unsymmetrical Lines

EMTest CDN for 4 unshielded unsymmetrical lines to test  immunity to conducted RF per EN IEC 61000-4-6 and IEC/EN 60945.

RENTAL

EM Test CDN M2M3 Conducted RF Immunity Coupler For Single Phase 250 V/16 A

EMTest Single phase 2 or 3 line CDN for testing products for immunity to conducted RF per EN IEC 61000-4-6.

RENTAL

EM Test CDN M5 32A - Conducted RF Immunity Coupler/Decoupler for 3-Phase 400V / 32A

EMtest three phase 5 line (L1,L2,L3,N,Pe) CDN for testing products for immunity to RF per EN IEC 61000-4-6.

RENTAL

EM Test CNV504 - Dataline Coupler

EMTest CNV504N1.3 coupling/decoupling networks for unshielded  unsymmetrical interconnection signal/data lines. Surge pulses or Ringwave pulses are applied to unshielded unsymmetrical interconnected lines by means of standalone coupling/decoupling networks for 4 signal/data lines.

CNV 504 N1.3 combines three different applications; coupling of Surge pulse via capacitor or gas arrestor and coupling of Ringwave pulses via capacitor being required by EN IEC 61000-4-5 and/or EN IEC 61000-4-12. The required coupling mode, Differential or Common, can easily be selected by means of a simple jumper.

In accordance with EN IEC 61000-4-5 and EN IEC 61000-4-12 pulses are coupled via different coupling elements such as capacitors or gas arrestors depending on the characteristics of the line signals.

RENTAL

EM101 - EM Test Clamp For Conducted RF Test Systems

EMTest RF Injection clamp for testing products for immunity to RF per EN IEC 61000-4-6 - Includes the FTC 101 decoupling clamp.

 

RENTAL

F-120-6A Bulk Current Injection Probe For Conducted RF Testing to Mil Std 461 CS114, DO 160 sec 20

The F120-6A is a Fischer Custom Communications bulk current Injection Probe for testing products for immunity to conducted RF per Do 160 sec 114, Mil Std 461 CS114. Includes calibration fixture.

Showing 1 to 9 of 11 products