Showing 17 - 28 of 28 products
Quick Access
Return Instructions

Standard Terms

Transient Specialists, Inc. (TSI)

Standard Terms & Conditions:

  • TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  • Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  • Payment terms are net 30 with credit approval. Non-payment or late payment of amounts due will result in interest charges of 1% per month and upon demand, return of the equipment.
  • The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  • In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem.  Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  • The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  • The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  • The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  • In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  • The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  • This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
  •  

    FAQ
    EMC Instruments CG 100/500 - Front Side EMC Instruments CG 100/500  - Front
    EMC Instruments CG 100/500 Conducted Comb Generator 100kHz-400MHz
    • Conducted Comb Generator (100 kHz or 500 kHz)
    • Frequency Range: 100 kHz - 400 MHz
    • Used for Verificaiton of Conducted Emissions Setup
    In Stock
    ETS-Lindgren EMCO 3810 Front Side ETS-Lindgren EMCO 3810 Front
    ETS-Lindgren/EMCO 3810/2NM - Rent 50µH 10Amp LISN
    • Frequency Range: 9 kHz to 30 MHz
    • Maximum 10 Amps 125 Volts AC
    • Inductors: 250 & 50 Microhenry (air-core)
    In Stock
    EMC Partner EXT-IMU C-SHORT Front Side EMC Partner EXT-IMU C-SHORT Front
    EMC Partner EXT-IMU C-SHORT - IMU Common Extension
    • Power Frequencies: DC, 16.67 Hz, 50 Hz, & 60 Hz
    • Output voltage 30 V – 330 V for 1000 seconds
    • Included with Common Mode Test System
    In Stock
    EMC Partner CN 16 - Front EMC Partner CN 16 Side
    EMC Partner CN16 - Coupler for Common Mode Testing
    • 415 V AC/Sweep Tests & 115 V DC Tests  
    • Manual Coupler for 1, 2 or 4 Power Lines
    • Rented with Common Mode Test System
    In Stock
    EMC Partner PS3 - 3kW Pre-Programmed Power Supply EMC Partner PS3 - 3kW Pre-Programmed Power Supply
    EMC Partner PS3 - 3kW Pre-Programmed Power Supply
    • Outputs: 230 V/50 Hz, 115 V/60 Hz, & 115 V/400 Hz
    • Compliant to IEC 61000-4-28 Frequency Variations
    • Included with Common Mode Test System
    EMC Partner DOW3000 Front Side EMC Partner DOW3000 Front
    EMC Partner DOW3000 - Rent Fast Damped Oscillatory Generator
    • 3 MHz, 10 MHz, & 30 MHz 4 kV DOW Generator
    • Built-in CDN Max 690 V/32 A AC or 500 V/32 A DC
    • Compliant Test System IEC 61000-4-18
    In Stock
    EMC Partner CN-BT7 Front Side EMC Partner CN-BT7 Front
    EMC Partner CN-BT7 - Indirect Lightning Injection Probe
    • Large aperture 5.5 cm x 8 cm
    • Rented With EMC Partner AVI System
    • Used as Coupler for 5 Waveforms
    EMC Partner MIG-OS-OS1 Front Side EMC Partner MIG-OS-OS1 Front
    EMC Partner MIG-OS-OS1 - Rent Slow Oscillatory Wave Generator
    • 100 kHz & 1 MHz 3 kV DOW Generator
    • Rented with EMC Partner CDN 2000-06-25
    • Compliant to IEC 61000-4-18 Slow Pulses
    EMC Partner IMU4000 - Front Side EMC Partner IMU4000 - Front
    EMC Partner IMU4000 - Rent 4kV EFT, Surge, & Dips System
    • 4 kV Surge & 4.4 kV EFT/Burst Capabilities
    • CDN Max 280 V/16 A AC or 300 V/16 A DC
    • Capabilities for Voltage Dips up to 6 Amps
    EMC Partner MIG-OS-OS1 & CDN 2000-06-25 - Side EMC Partner MIG-OS-OS1 & CDN 2000-06-25 - Front
    EMC Partner MIG-OS-OS1 - Rent Damped Oscillatory Test System
    • 100 kHz & 1 MHz 3 kV DOW Generator
    • Includes EMC Partner CDN 2000-06-25
    • Maximum 480 Volts 25 Amps AC
    CDN 2000-06-25 - Side CDN 2000-06-25 - Front
    EMC Partner CDN 2000-06-25 - Rent 3-Phase 25 Amp CDN
    • Coupler for Damped Oscillatory Pulses
    • Maximum 480 Volts 25 Amps AC
    • Rented with MIG-OS-OS1 Generator
    ThermoScientific EMCPro Plus - Front Side ThermoScientific EMCPro Plus - Front
    ThermoScientific EMCPro Plus - Rent 6 kV Transient Test System
    • 6 kV Surge, 4.4 kV EFT, & 6 kV 100 kHz Ringwave
    • Built-in CDN Max 250 V/16 A AC or 100 V/10 A DC
    • Capabilities for Voltage Dips Testing