Showing 1 - 16 of 28 products
Quick Access
Return Instructions

Standard Terms

Transient Specialists, Inc. (TSI)

Standard Terms & Conditions:

  • TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  • Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  • Payment terms are net 30 with credit approval. Non-payment or late payment of amounts due will result in interest charges of 1% per month and upon demand, return of the equipment.
  • The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  • In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem.  Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  • The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  • The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  • The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  • In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  • The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  • This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.

    •  

    FAQ
    EMC Partner ESD3000 Side Front EMC Partner ESD3000 Display
    EMC Partner ESD3000 - Rent 16 kV ESD Simulator/Gun
    • 16 kV Air Discharge & 10 kV Contact-discharge (100 V Steps)
    • Rechargeable Battery Powered ESD Simulator
    • Includes DM1 150pF / 330Ω Network for IEC 61000-4-2 Testing
    Monthly Rental- $590
    Choose options
    In Stock
    EMC Instruments CG 100/500 - Front Side EMC Instruments CG 100/500 - Front
    EMC Instruments CG 100/500 Conducted Comb Generator 100kHz-400MHz
    • Conducted Comb Generator (100 kHz or 500 kHz)
    • Frequency Range: 100 kHz - 400 MHz
    • Used for Verificaiton of Conducted Emissions Setup
    In Stock
    EMC Partner CN-GI-CI-V Front Side EMC Partner CN-GI-CI-V Front
    EMC Partner CN-GI-CI-V - Cable Bundle Voltage Injection Clamp
    • Designed for WF4, WF5A (voltage)
    • Level 5 for Single & Multiple Stroke Tests
    • Rented with AVI Test Generator
    In Stock
    EMC Partner MIL-MG3 - Front Side EMC Partner MIL-MG3 - Front
    EMC Partner MIL-MG3 - Rent MIL-STD & DO-160 Test System
    • Exceeds maximum test levels in MIL-STD-461
    • Single Generator for CS115 & CS116 Requirements
    • Automated Test Routines from Front Panel
    In Stock
    EMC Partner MIG-OS-OS1 Front Side EMC Partner MIG-OS-OS1 Front
    EMC Partner MIG-OS-OS1 - Rent Slow Oscillatory Wave Generator
    • 100 kHz & 1 MHz 3 kV DOW Generator
    • Rented with EMC Partner CDN 2000-06-25
    • Compliant to IEC 61000-4-18 Slow Pulses
    In Stock
    ES105 ESD Voltmeter & Accessories - Front ES105 ESD Voltmeter - Front
    ESDEMC ES105 - Rent High-Resistance Electrostatic Voltmeter
    • Used for Air Discharge ESD Voltage Verification
    • Measure DC to 100kV (Similar to ESVM 2) 
    • MIL-STD-461 CS118 Compliant
    In Stock
    EMC Partner DM1 - Front Side EMC Partner DM1 - Side
    EMC Partner DM1 - Rent 150 pf/ 330 ‎Ohm Discharge Module
    • 16 kV Air & 10 kV Contact Discharge
    • 150 pF/ 300 Ω Discharge Module
    • Used with ESD3000 ESD Simulator
    EMC Partner EXT-IMU C-SHORT Front Side EMC Partner EXT-IMU C-SHORT Front
    EMC Partner EXT-IMU C-SHORT - IMU Common Extension
    • Power Frequencies: DC, 16.67 Hz, 50 Hz, & 60 Hz
    • Output voltage 30 V – 330 V for 1000 seconds
    • Included with Common Mode Test System
    In Stock
    EMC Partner DM1 - Front Side EMC Partner DM1 - Side
    EMC Partner DM4 - Rent 100 pF/ 1,500 Ω Discharge Network
    • 16 kV Air & 10 kV Contact Discharge
    • 100 pF/ 1,500 Ω Discharge Module
    • Used with ESD3000 ESD Simulator
    EMC Partner AVI-LV3 - Front Side EMC Partner AVI-LV3 - Front
    EMC Partner AVI-LV3 - Rent MIL-STD & DO-160 Level 3 Generator
    • RTCA/DO-160 Section 22, Level 3 & CS117 Lvl.1 
    • Capabilities for Testing Waveforms 1 - 6 
    • Includes CN-BT7 Injection Probe & TEMA3000 Software
    EMC Partner DOW3000 Front Side EMC Partner DOW3000 Front
    EMC Partner DOW3000 - Rent Fast Damped Oscillatory Generator
    • 3 MHz, 10 MHz, & 30 MHz 4 kV DOW Generator
    • Built-in CDN Max 690 V/32 A AC or 500 V/32 A DC
    • Compliant Test System IEC 61000-4-18
    In Stock
    EMC Partner ESD-VERI-V - Front Side EMC Partner ESD-VERI-V - Front
    EMC Partner ESD-VERI-V - Rent ESD Voltage Divider
    • Allows for Voltage Level Verification
    • Designed for use with ESD3000 Simulator
    • Can be used with DMM or Oscilloscope
    EMC Partner DN6 - Front Side EMC Partner DN6 - Side
    EMC Partner DN6 - Rent 330 pF/ 330 Ω Discharge Network
    • 30 kV 330 pF/330 kΩ Discharge Network
    • Used with ESD3000 ESD Simulator
    • Requires RM32 Relay Module
    In Stock
    EMC Partner DN6 - Front Side EMC Partner DN6 - Side
    EMC Partner DN3 - Rent 30 kV 150 pF/2 kΩ Discharge Network
    • 30 kV 150 pF/2 kΩ Discharge Network
    • Used with ESD3000 ESD Simulator
    • Requires RM32 Relay Module
    In Stock
    EMC Partner DN1 - Front Side EMC Partner DN1 - Side
    EMC Partner DN1 - Rent 30 kV 150 pF/330 Ω Discharge Network
    • 30 kV 150 pF/330 Ω Discharge Network
    • Used with ESD3000 ESD Simulator
    • Requires RM32 Relay Module
    EMC Partner RM32 - ESD3000 30kV Relay Module HV Technologies/EMC Partners RM32 - Relay Module For ESD 3000 ESD gun For 30kV and Automotive Networks
    EMC Partner RM32 - ESD3000 30kV Relay Module
    • Required for 30 kV Testing
    • Connects Directly to Front of Simulator
    • Rented with EMC Partner ESD3000
    In Stock