Showing 33 - 41 of 41 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
Siglent SSA3021X Plus - Rent 2.1 GHz Spectrum Analyzer Siglent SSA3021X Plus - Rent 2.1 GHz Spectrum Analyzer
Siglent SSA3021X Plus - Rent 2.1 GHz Spectrum Analyzer
  • Frequency Range 9 kHz - 2.1 GHz
  • Resolution bandwidth (RBW) 1 Hz~1 MHz
  • Tracking Generator 100 kHz – 2.1 GHz
One Month Rental-$200
In Stock
TekBox TBLC08 - Front Side TekBox TBLC08 - Front
TekBox TBLC08 - Rent 50µH 8 Amp AC LISN
  • Frequency Range: 9 kHz - 30 MHz
  • Nema Style US Socket on Front
  • Line Voltage Maximum 240 Volts AC
In Stock
Solar 8610-50 - Front Side Solar 8610-50 - Front
Solar 8610-50 - Rent 50uH 500 Volt 100 Amp LISN
  • Frequency Range 10 kHz – 30 MHz
  • Max 500 Volts AC (600 Volts DC) 100 Amps
  • Ideal for MIL-STD-461 Series of Tests
In Stock
Com-Power CLCE-400 - Side vertical Com-Power CLCE-400 - Side Top
Com-Power CLCE-400 - Rent 400 MHz RF Monitoring Probe
  • Frequency 10 kHz - 400 MHz 
  • Internal Diameter of 32 mm
  • Includes FCLCE-1000 Calibration Fixture
Rohde & Schwarz ENV4200 Front Side Rohde & Schwarz ENV4200 Front
Rohde & Schwarz ENV4200 - Rent 50uH 200 Amp LISN
  • Simulated Impedance 50 µH || 50 Ω
  • Maximum: 200 Amps 690 Volts AC 
  • V-Network for CISPR, ANSI, & FCC Part 15
In Stock
EM Test CA BS 200N Front Side EM Test CA BS 200N Front
EM Test CA BS 200N - Load Impedance for BS 200N
  • 0.6ohm / 50uH Load as per ISO 7637-2:2004
  • Max Supply Voltage 28VDC
  • Max Load Current 50A
Teseq MD 4070A - Front Side Teseq MD 4070A - Front
Teseq MD 4070A - Rent 4 kHz to 400 MHz Monitoring Probe
  • Frequency 4 kHz - 400 MHz 
  • Includes PCJ 8201B Calibration Fixture
  • Suitable for BCI Testing to ISO & MIL-STD
EM Test NX5 Front Side EM Test NX5 Front
EM Test NX5 bsp-1-300-32 - Rent Transient System 32 Amp CDN
  • Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
  • Built-in single phase CDN Max 300 V/32 A AC or DC
  • Laptop with iec.control software included
Rent Haefely IP4B - Front Side Rent Haefely IP4B - Front Top
Rent Haefely IP4B Capacitive Coupling Clamp
  • Construction as per IEC 61000-4-4 Ed.3
  • EFT/Burst testing of signal and data lines
  • For cable diameter from 4 – 40 mm
In Stock