Home Automotive EMC Test Equipment Rentals CA BS 200N

CA BS 200N

Name: EM Test CA BS 200N - Load Impedance for BS 200N
Brand: EM Test
Availability: OutOfStock

Load Impedance for BS 200N

The EM Test CA BS 200N is a 0.6 Ω/50 µH load impedance rated to 28 VDC and 50 A, designed for ISO 7637-2 transient emission switch verification.

Features

0.6ohm / 50uH Load as per ISO 7637-2:2004

Max Supply Voltage 28VDC

Max Load Current 50A

Built-in 10, 20, 40, & 120 Ohm Resistors

Up to 4 Free Days of Transit Time

Two transit days each way are excluded from rental period

Overview

The switching behavior of the BS 200N series semiconductor switches shall be verified on 0.6ohm to 50uH load inpedance.

The CA BS 200N is directly connected to the output of the BS 200Nx. The switching parameters of the BS 200Nx are measured with the load connected. Additionally, the CA BS 200N includes a number of shunt resistors Rs such as 10ohm, 20ohm, 40ohm and 120ohm being required as per standards used during the emission measurement of transients as per ISO 7637-2:2011 and the former ISO 7637-2:2004.

Max battery supply voltage: 28Vdc
Load current: Max. 50A
Operating time: 13.5V supply approx. 1 hour
28.0V supply approx. 10 minutes
Overheat indication: LED
Protection: Switch Off (overtemperature sensor)
Cooling: Forced Air

Load: 0.6ohm in series with 50uH
Parallel load resistor: 10, 20, 40 or 120ohm, selectable via short circuit connectors
Dimensions: 19 Inches /3HU, 133mm x 500mm x 500mm
Weight: 19.1kg
Mains supply: 80V to 240Vac
Fuse: 1A slow blow