Immunity Test Solutions for CE Marking - EN 55035
Immunity Test Solutions for CE Marking - EN 55035

This standards is covered under the radio equipment directive (2014/53/EU) and is based on CISPR 35 with modifications. This

EN 55035 - EU RED/EMCD Directive Immunity Test Equipment

Showing 1 to 9 of 47 products

RENTAL

A NSG 3060 Rental - Teseq 6.6kV Surge, Ringwave, & 4.8kV EFT Generator

The Teseq (previously Schaffner) NSG 3060 EMC Immunity generator provides testing for EFT(electrical fast transients) to 4.8kV, Surge to 6.6kV, 100kHz ring wave to 6.6kV and offers solutions for both CE mark, ANSI, and IEC testing.  A2LA accredited calibration is included in the EMC rental equipment price. It includes both coupling methods associated with IEC and ANSI EMC testing standards. We also offer a variety of accessories available for rent, including the CDN 3083 series (CDN3083-S100 & CDN3083-B100), allowing for enhanced testing capabilities. 

This multifunction generator offers a user-friendly design to help streamline testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN 61000-4-12, ANSI C62.41, C62.45, and UL 1449. It offers a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This system is often rented with the CDN 3061 (coupling decoupling network) allowing for single phase coupling up to 270V/16A.

This Immunity Test Generator has a Ethernet port for connect with a PC and includes window based software. This simplifies electromagnetic compatibility testing allowing for compilation of complex test sequences with diverse pulse types. The software with the NSG3060 test set enables the user to create reports and enter observations as the test progresses increasing the efficiency of long-term tests.

RENTAL

NSG 3040 Rental - EFT 4.4kV, Surge 4.8kV Built-In Coupler

The Teseq NSG 3040 electromagnetic immunity (EMI) test generator provides 4.4kV Surge and 4.4kV electrical fast transient (EFT) with a built-in single phase coupler and is designed primarily for cable-borne transient interference tests. A2LA accredited calibration is included in the EMC rental equipment price. This Teseq products modular architecture and industry standard interfaces allow it to be easily expanded and customized to meet individual testing needs.

This Immunity Test Generator is designed to fulfill conducted EMC testing requirements for CE mark testing, including Combination Wave Surge (4.4 kV), Electrical Fast Transient (EFT) pulses (4.8 kV) and Power Quality Testing (PQT). The NSG3040 includes a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This EMC test equipment can also be controlled via PC through the Ethernet Port.

This Teseq (previously known as Schaffner) surge/immunity generator is an all in one box that tests to EN/IEC 61000-4-4, EN/IEC 61000-4-5 and EN/IEC 61000-4-11 and CE Mark with optional INA 6502. Expansion capabilities enable the system to be configured for a much broader range of applications including Telecom Surge 10/700 and Magnetic Field tests. This pulse generator, similar to the NSG 3060, provides the same easy to use interface and connection methods.

RENTAL

EMC Pro Plus Rental - Keytek Immunity Surge & Transient Generator

The EMC Pro Plus made by Thermo Fisher Scientific is a 6 kv Generator for EFT to 4.4kV, Surge to 6kV, 100 kHz Ringwave to 6kV, Dips and Interrupts with a built-in single phase coupler. All of our EMC Immunity generators come with an A2LA calibration & technical support. Additional test capabilities such as the 10x700 Telecom Wave is available on request.

This EMI Immunity Generator is an easy to use, cost effective solution to a diverse set of testing needs. This system provides easy to use front panel display and can be controlled via computer through windows based software. It also monitors output of the coupling unit and automatically switches connections according to coupling mode.

The EMC Pro Plus is designed to test for a variety of EMC immunity industry standards including EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11, EN/IEC 61000-4-12, CEMark, and ANSI IEEE C62.41 cat. B. The EMC Pro Plus rental equipment It also can also be configured for custom test protocols to meet specific test requirements using the software and a full line of options and accessories.

SALE/RENTAL

NSG 438 ESD Simulator - Buy New 30kV Generator

The NSG 438, often just referred to as the NSG438, provides testing capabilities up to 30kV with easy to use and ergonomic design. Transient Specialists is the only authorized sale partner of Teseq ESD simulators in the United States. We also offer options for A2LA accredited calibrations upon request. This ESD Gun comes with 150pF/330Ω discharge network, commonly used for IEC 61000-4-2 and ISO 10605 testing.

This test equipment color touch screen allows modification many parameters including polarity selection, pulse repetition, counter functions, and discharge network detection. This Teseq product is unique in offering an activity log where the number and type of simulations can be verified by time frame and standard. It comes with discharge pistol, cradle for discharge pistol, high voltage base unit and battery pack, and many other accessories.

This pulse generator through the screen offers selectable language options, for convenience and world wide use.  We also rent and sell a variety of other Teseq products including the NSG 435 and NSG 437 providing solutions for a large spectrum of electrostatic discharge testing. For automotive testing we also carry the NSG 438 Auto, which provides 330pF/330Ω, 150pF/2kΩ and 330pF/2kΩ networks designed for a variety of both international and manufacturer automotive standards.

Options:
  • Purchase New 4-6 Week Delivery $14,640.00
  • Rental 1 Week $545.00
  • Rental 1 Month $1,090.00

SALE/RENTAL

NSG 435 Rent and Buy New - Teseq ESD Simulator IEC 61000-4-2

The NSG 435 by Teseq is a comprehensive ESD Simulation System for air discharge to 16.5 kV and contact mode to 9 kV. Transient Specialists is the only authorized sale partner of Teseq ESD simulators in the United States The rental includes an A2LA accredited calibration and technical support included in the price. This product comes standard with an 150pF/330Ω discharge network and tips for both air and contact discharge.

The pistol-shaped NSG 435 ESD Simulator is designed to sit comfortably in the operator’s hand, with current operating conditions constantly displayed and clearly visible. It also allows for use in environments without easily accessible power supplies where other test equipment require additional consideration. The user-selected test parameters are shown on the LCD panel and easily adjusted with the keypad. 

This ESD generators microprocessor-based controller and multi function keypad provide the operator with instant access to its comprehensive range of built-in functions. The product comes with IEC 61000-4-2 and ANSI C63.16 test settings pre-programmed to allow for tests to be run efficiently. The voltage of this Teseq product can also be programmed from 200 V to 16.5 kV depending on your EMC testing requirements.

Options:
  • Buy New Delivery 4 Weeks $7,500.00
  • Buy New With Acc. Cal. In Stock $8,280.00
  • 1 Week Rental $295.00
  • 1 Month Rental $590.00

RENTAL

Thermo Keytek MZ-15 - Keytek Minizap ESD Simulator

The Keytek MZ-15 ESD simulator by Thermo Fischer Scientific allows for air discharge to 15kV and contact mode to 8kV with simple, intuitive operation. A2LA accredited calibration is included in the EMC rental equipment price. The MZ-15 also known as the Keytek Minizap, is light weight and durable lending itself well to long-term use in harsh environments in the field. It is also one of the more well-known simulators, the design remaining almost uncharged over 20 years.

This electrostatic discharge generator is ideal for testing to EN IEC 61000-4-2, ANSI C63.16, and others through manipulation output voltage selection and pulse repetition rate selector knobs. The interchangeable plug-in tips allow for testing to different standards. The polarity can be switched on the test equipment by switching the output polarity selection on the side of the equipment. 

The Minizap ESD simulator does not use a voltage multiplier, and won’t introduce testing errors and uncertainties due to streams of artificial, high-level ESD multiples generated by a human discharge or by other simulators. The Keytek simulator is easily mounted on a tripod allowing for tests to be ran consecutively without user fatigue. Real time voltage is displayed via the actual output voltage indicator with accuracy typically at +/- 3% for this product. 

Options:
  • Rental 1 Week $245.00
  • Rental 1 Month $490.00

SALE/RENTAL

NSG 437 Rent & Buy New - Teseq 30kV ESD Gun 150pf/330Ω

The Teseq NSG437 ESD gun allows for testing to 30kV air and contact (150pf/330Ω) with a simple and easy to use design. Transient Specialists is the only authorized sale partner of Teseq ESD simulators in the United States. It provides functions very similar to its competitors the Haefely ONYX 30 and the EM test ESD NX30.  It includes an accredited calibration and technical support is included in the rental equipment price. This equipment is an ideal solution for field testing as voltage levels can be easily modified for efficient testing to and above several standards.

This test equipment allows for manipulation of testing parameters for EN IEC 61000-4-2, ANSI C63.16 through the use of the display. It is designed to sit comfortably in the operator’s hand, with operating conditions constantly displayed and accessible on a bright, clear color touch display. This product is unique in offering an activity log where the number and type of simulations can be verified by time frame and standard.

The NSG 437 ESD Simulator has a color touch display and keypad for parameter input shows the precise functional and test data with user-selectable language for convenient and safe operation worldwide. The simulator contains variable threshold selection for accurate discharge detection. This detection feature can be switched off when testing EUT’s with non-conductive surfaces, such as plastic housings. This product is part of the Teseq electrostatic generator line of products including the NSG 435 and NSG 438.

Options:
  • Purchase New 4-6 Week Delivery $11,210.00
  • Rent 1 Week $495.00
  • Rent 1 Month $990.00

RENTAL

Axos 5 Rental - Haefely Hipotronics 5kV Surge & EFT Generator

The Haefely Axos 5 EMI test generator for 5kV Surge and EFT with a built-in single phase coupling/decoupling network. A2LA accredited calibration is included in the EMC rental equipment price. This compact Haefely product provides safe and reliable operation by using safety interlock, warning lamp and emergency stop functions helping to ensure safe use.

This Immunity Test Generator is designed for EFT / Burst, Surge, Magnetic Field and AC & DC Dips and Interrupts allowing for a diverse range of applications. This pulse generator is easy to operate with manual and automated test mode and software assisted test preparation. The touch screen provides efficient and effective manipulation of testing criteria to meet or a diverse set of testing needs.

The Axos 5 expandable functionality allows for quick and completely automated testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5 and EN/IEC 61000-4-11 and CE Marking. The unit also includes an integrated single-phase coupling decoupling network (CDN) for EMC testing applications up to 16A. The AXOS unit can either be operated via front panel by large color graphic interface or remotely from the PC for added flexibility. 

RENTAL

NX5 Rental - EM Test 5kV Surge & EFT Generator 16A. Coupler

The EM Test NX5 EMI test generator to 5.5kV EFT and 5kV surge with a built-in 16 amp single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. It is the most versatile tester to address transient and power fail requirements for both international and commercial standards. 

This Immunity Test Generator includes an easy-to-use color touch screen allow for efficiently changing of testing parameters. It can be operated manually from the intuitive front touch screen or remotely via its built-in Ethernet, USB or optical interface. The NX 5 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing.

This product includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11 and CE Mark. This EM Test pulse generator includes internal single-phase Coupling/Decoupling Network (CDN) that can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 Amp per phase. With separate power mains supply inputs, it allows the utilization of different EUT supply voltages for maximum flexibility.

Showing 1 to 9 of 47 products