Showing 17 - 32 of 56 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
EMC Partner ESD3000 Side Front EMC Partner ESD3000 Display
EMC Partner ESD3000 - Rent 16 kV ESD Simulator/Gun
  • 16 kV Air Discharge & 10 kV Contact-discharge (100 V Steps)
  • Rechargeable Battery Powered ESD Simulator
  • Includes DM1 150pF / 330Ω Network for IEC 61000-4-2 Testing
Monthly Rental-$295
Choose options
EM Test CNV 504N1.3 - Front Side EM Test CNV 504N1.3 - Front
EM Test CNV 504N1.3 - Rent Unsymmetrical Unshielded CDN
  • CDN for 4 Unshielded Unsymmetrical Lines
  • Coupler for Surge & Ringwave Transients
  • Maximum Impulse Voltage 4 kV
In Stock
Teseq CDN 3063 - Front Side Teseq CDN 3063 - Rent 3-Phase 480 Volt 32 Amp CDN
Teseq CDN 3063 - Rent 3-Phase 480 Volt 32 Amp CDN
  • Coupler for Surge, EFT, & Ringwave Pulses
  • Maximum 480 Volts 32 Amps AC/DC
  • Automatic Coupler for NSG 3060/NSG 3040
Buy Used-$11,000
In Stock
Teseq CDN 3083-S100 - Front Side Teseq CDN 3083-S100 - Side Above
Teseq CDN 3083-S100 - Rent 3-Phase 100 Amp Surge CDN
  • Coupler for Surge to IEC 61000-4-5
  • Max 100 Amps 690 V AC or 620 V DC
  • Manual Coupler for NSG 3060 or NSG 3040
Buy Used-$17,000
In Stock
Teseq CDN HSS-2 Front Side Teseq CDN HSS-2 Side
Teseq CDN HSS-2 - Rent Symmetrical High-Speed Data CDN
  • CDN for up to 8 wire unshielded twisted pair (UTP)
  • Max Surge Voltage 2 kV Current 50 Amps
  • Coupling to 1, 2 or 4 pairs
In Stock
Haefely AXOS 8 Front Side Haefely AXOS 8 Front
Haefely AXOS 8 - Rent 7 kV Transient Test Generator
  • 7 kV Surge, 5.5 kV EFT, & 7 kV 100 kHz Ringwave
  • Built-in CDN Max 264 V/16 A AC or 220 V/10 A DC
  • Compliant to ANSI Coupling Requirements 
In Stock
Teseq NSG 3060 CDN 3061 Front Top Teseq NSG 3060 CDN 3061 Front Side
Teseq NSG 3060 CDN 3061 - Rent 6kV Transient Test System
  • 6.6kV Surge & Ringwave, 4.8kV EFT Generator
  • Typically used for Single Phase EUT 
  • Includes Teseq CDN 3061 (270V/16Amps)  
Buy Used-$29,000
In Stock
EMC Partner IMU4000 - Front Side EMC Partner IMU4000 - Front
EMC Partner IMU4000 - Rent 4kV EFT, Surge, & Dips System
  • 4 kV Surge & 4.4 kV EFT/Burst Capabilities
  • CDN Max 280 V/16 A AC or 300 V/16 A DC
  • Capabilities for Voltage Dips up to 6 Amps
EM Test NX5 Front Side EM Test NX5 Front
EM Test NX5 bsp-1-300-32 - Rent Transient System 32 Amp CDN
  • Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
  • Built-in single phase CDN Max 300 V/32 A AC or DC
  • Laptop with iec.control software included
EMC Partner TRA3000 C  - Front with Laptop EMC Partner TRA3000 C  - Front
EMC Partner TRA3000 C - Rent Common Mode Test System
  • Frequency Sweep, Short, & Long Capabilities
  • Laptop with TRA3000 Included with System
  • Includes EMC Partner P3 & EXT-IMU C-SHORT
In Stock
Teseq NSG 3150 - Rent 15 kV Surge Test System Teseq NSG 3150 - Rent 15 kV Surge Test System
Teseq NSG 3150 - Rent 15 kV Surge Test System
  • 15 kV/ 7.5 kA Surge Generator
  • External CDN 3153-S63 Included
  • Compliant to IEC 61000-4-5
In Stock
EMC Partner DN1 - Front Side EMC Partner DN1 - Side
EMC Partner DN1 - Rent 30 kV 150 pF/330 Ω Discharge Network
  • 30 kV 150 pF/330 Ω Discharge Network
  • Used with ESD3000 ESD Simulator
  • Requires RM32 Relay Module
EM Test NX30 Front with Base Station EM Test ESD NX30 Simulator Base Station
EM Test ESD NX30 - 30 kV ESD Simulator w/ Charge Removal
  • 30V Air & Contact Discharge (100V Steps)
  • Rechargeable Battery Powered ESD Simulator
  • Includes 150 pF/ 330 Ohm Network (INA 4380)
EM Test CNI 508N2 Front Side EM Test CNI 508N2 Front Connections
EM Test CNI 508N2 - Rent Communication Line Coupler 1GBIT/S
  • CDN for Shielded & Unshielded Data Lines
  • Maximum 3 kV Surge & 4 kV EFT/Burst
  • Compatible to PoE and PoE+ requirements
Teseq IMN2 - Side Teseq IMN2 - Front
Teseq IMN2 Impedance Matching Network - Surge impulse Generators
  • Impulse Range: Up to 8,000 V and 4,000 A
  • IEC 61000-4-5 Ed.3 Pulse Impedance Matching
In Stock
EM Test Coupling NX7 bsr-3-480-32 - Front Side EM Test Coupling NX7 bsr-3-480-32 - Front
EM Test Coupling NX7 bsr-3-480-32 - Rent 3-Phase 32Amp CDN
  • Coupler for Surge, EFT, & Ringwave Pulses
  • Max 480 Volts 32 Amps AC
  • Automatic Coupler for NX5/NX7 Systems