IEC 61000-4-5 - Surge/Combination Wave System Rentals
4kV Combination Wave Generators
- Teseq, EM Test, KeyTek, Haefely, & EMC Parnter
- Rent up to 15kV Combination Wave Systems
- ISO 17025 Calibrations & Often Laptop
- Many Offer EFT/Burst IEC 61000-4-4
- Large Inventory of CDNs & Accessories
- Rental External Variac/Transformer for Dips
≤ 4kV Pulse Generators
1.2/50us Systems
6kV Pulse Generators
1.2/50us Systems
≥ 6kV Combination Wave
High Voltage Generators
Coupling Decoupling
CDN Equipment Rental
EMI Accessories
Monitoring & Devices
- CDN for 4 Unshielded Unsymmetrical Lines
- Coupler for Surge & Ringwave Transients
- Maximum Impulse Voltage 4 kV
- CDN for Shielded & Unshielded Data Lines
- Maximum 3 kV Surge & 4 kV EFT/Burst
- Compatible to PoE and PoE+ requirements
- Impulse Range: Up to 8,000 V and 4,000 A
- IEC 61000-4-5 Ed.3 Pulse Impedance Matching
- Coupler for Surge, EFT, & Ringwave Pulses
- Max 480 Volts 32 Amps AC
- Automatic Coupler for NX5/NX7 Systems
- 7 kV Surge, 5.5 kV EFT, & 7 kV 100 kHz Ringwave
- Built-in single phase CDN Max 300 V/16 A AC or DC
- Laptop with iec.control software included
- Max: 690 Volts Phase to Phase, 63 Amps
- Rented with Teseq NSG 3150 Test System
- Compliant for IEC 61000-4-5 Coupling Methods
- Frequency Sweep, Short, & Long Capabilities
- Laptop with TRA3000 Included with System
- Includes EMC Partner P3 & EXT-IMU C-SHORT
- CDN for 4 Unshielded Unsymmetrical Lines
- Coupler for Surge & Ringwave Transients
- Maximum Impulse Voltage 4.8 kV
- Coupler for Surge, EFT, & Ringwave Pulses
- Max 125 Amps 690 V AC or 1,000 V DC
- Transient Generator Mounted in Rack
- Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
- Built-in single phase CDN Max 400 V/16 A AC or DC
- Laptop with iec.control software included
- Coupler for Surge to IEC 61000-4-5
- Max 100 Amps 690 V AC or 1,000 V DC
- Manual Coupler for NX5/NX7 Systems
- Allows for Testing 1000 V DC / 63 Amps
- Connects to Back of CDN 3153-S63
- Rented with Teseq 3150 Test System
Overview
EN/IEC 61000-4-5 - 2014 relates to immunity requirements for unidirectional surges caused by over-voltages from switching and lightning transients. This standard defines ranges of test levels, test equipment, test setups, and test procedures for equipment under test (EUT). The goal of this International Electrotechnical Commission (IEC) standard is a reproducible guide to evaluate equipment when exposed to this type of phenomena. It specifies that direct injections of lightning currents (direct lightning strikes) are not considered in this standard. The most recent 2014 version 3 cancels out previous publications and gives specifications for 10/700 µs combined wave generator. The most changes from version 2 fall underneath the test procedures section of the standard. This Standard can be purchased on the IEC Webstore.
Testing
This IEC standard is based on a surge, a transient wave of electrical current, and is tested for by Immunity Test Equipment. This standard defines two Combination Wave pulses (Open Circuit Voltage and Short Circuit Current). It set the number of pulses from the EMC test equipment to a.c. ports, d.c. ports, and interconnection lines, at 5 positive and 5 negative (a.c. at 0°, 90°, 180°, & 270°). The time per each pulse must be one minute or less and the EUT must be under operating conditions while the EMC testing is occurring.
Generators
For EN/IEC 61000-4-5 combination wave/surge rentals we offer a variety of different EMI test equipment suppliers including Teseq, EMC Partner, EM Test, Haefely, and many others to meet customer requirements and preferences. These products all have the capability to meet the surge requirements and each have unique testing and reporting capabilities. The most common rental units for surge testing are the NSG 3060, Axos 8, NX5, and UCS500n7. We also provide many accessories that may be required to complete unique and specific testing requirements. These EMI surge products come with an A2LA accredited calibration and free technical support included with the rental. 
