Ask Us About: ISO 11452 - Radiated EMI/Disturbances & BCI Equipment Rental
Transient Specialists
Filters
Recent Views
ISO 11452 - Radiated EMI/Disturbances & BCI Equipment Rental
- 800 MHz - 6Hz 250 Watts Output (Psat)
- 200 Watts P1dB & Mismatch Tolerant
- Class A Microwave Power Amplifier
- Teseq CIP 10 kHz - 400 MHz 1kW (max)
- IEC 61000-4-6, ISO 11452-4, & CS114
- Ideal for High Power BCI Testing
- Calibration Fixture F-33-2 & F-33-1 Probes
- Typically Required for BCI Testing
- Rented with Fischer Current Probe or System
- Frequency Range: 10kHz-400MHz 270VAC
- Ideal for RTCA DO-160/MIL-STD-461
- 25 Amp Com-Power LI-325 Available
- Frequency Range: 10kHz-400MHz 270VAC
- Ideal for RTCA DO-160/MIL-STD-461
- 50 Amp Com-Power LI350 Available
- RF Signal Generator 100 kHz - 6 GHz Range (506)
- Capable of AM, FM, PM, & Phase Modulation
- Ideal for IEC 61000-4-3 Radiated Testing
- Single-Channel 5 MHz Video Bandwidth
- Rented with E9300B 18GHz Average Sensor
- Ideal for CW Power Level Verifications
- Frequency Range 30 MHz to 6 GHz
- Ideal for Emissions & Immunity Sweep Testing
- Avg. 2:1 VSWR Above 50 MHz
- Frequency: 100kHz - 6GHz, Range: .5 - 800 V/m
- CW & FM Measurements & Plug and Play Software
- IEC 61000-4-3 Electric Field Verification
- EMF Meter/Control System up to 60GHz
- Can be used with any Wavecontrol Probes
- Includes Software & Cables for Remote Control
- DC to 40kHz Magnetic Field Probe (H Field)
- Static and Time-variable Fields Measurements
- Isotropic & True RMS measurement (with SMP2)
- Ideal for Vertical & Lateral Field Measurements
- Rents with E/H-Field Probe or Equipment
- Includes Wooden Tripod & Lateral Extension
- 1Hz to 400kHz Magnetic & Electric Field Probe
- Can Measure High V/m Levels (<100kV/m)
- Isotropic & True RMS measurement (with SMP2)
- 300KHz to 18GHz Electric Field Probe
- High Sensitivity .5V/m & Max 1000 V/m CW
- Used with Wavecontrol SMP2 Meter
51 products
Description
Overview
General Testing Information
This automotive/vehicle based standard is one of the main radiated standards when it comes to component testing. It cover 80MHz to 18Ghz frequency range through different testing including Shielded enclosure, BCI and other types. Given that this standard is broken down into several sections the publication dates very. The vast majority of where the interference or disturbances are coupled to include DUT and wiring harness in different configurations. It also places specific requirements of 80% modulation and tolerances for testing criteria. ISO 11452-1 A.2.3 defines functional status classifications for the equipment under test or EUT (Classes A-E).
Common Parts & Equipment
Given the overlap of this standards requirements, much of the equipment can be used for multiple sections depending upon its capabilities. Below are common parts and associated solutions. To ensure compliance, please reference associated section of the standard for specific requirements.
- Section 2 - Amplifiers, Signal Generator & Antennas
- Section 4 - Amplifier, Signal Generator, BCI equipment
Test Equipment
Transient Specialists
Filters