Showing 17 - 32 of 312 products
Quick Access
Return Instructions

Standard Terms

Transient Specialists, Inc. (TSI)

Standard Terms & Conditions:

  • TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  • Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  • Payment terms are net 30 with credit approval. Non-payment or late payment of amounts due will result in interest charges of 1% per month and upon demand, return of the equipment.
  • The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  • In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem.  Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  • The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  • The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  • The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  • In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  • The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  • This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
  •  

    FAQ
    Thermo Keytek ECAT E103 Front Side Thermo Keytek ECAT E103 Front
    Thermo Keytek ECAT E103 - Rent ECAT Control Center
    • Required to use ECAT Modules 
    • Firmware Updates Provided Upon Request
    • Additional Sections can be Added
    In Stock
    Teseq NSG 3150 - Rent 15 kV Surge Test System Teseq NSG 3150 - Rent 15 kV Surge Test System
    Teseq NSG 3150 - Rent 15 kV Surge Test System
    • 15 kV/ 7.5 kA Surge Generator
    • External CDN 3153-S63 Included
    • Compliant to IEC 61000-4-5
    In Stock
    PA 5840 - Front PA 5840 - Back
    Teseq PA 5840-300 - Rent 100Amp Automotive Battery Simulator
    • -15 to +60 Volts 100 Amps Continuous
    • High Bandwidth up to 150 kHz
    • 300 Amp Inrush Current Capability
    In Stock
    Teseq PA 5840-75 25 Amps - Front Side Teseq PA 5840-75 25 Amps - Front
    Teseq PA 5840-75 - Rent 25 Amp Battery Simulator
    • -15 to +60 Volts 25 Amps Continuous
    • High Bandwidth up to 150 kHz
    • 75 Amps Inrush Current Capability
    EM Test NX5 bsp-1-300-16 Front Side EM Test NX5 bsp-1-300-16 Front
    EM Test NX5 bsp-1-300-16 - Rent 5 kV Surge & EFT Generator
    • Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
    • Built-in single phase CDN Max 300 V/16 A AC or DC
    • Laptop with iec.control software included
    Monthly Rental-$1,550
    In Stock
    Teseq CAS 3025 - Attenuators Teseq CAS 3025 - Case & Accessories
    Teseq CAS 3025 - Rent Burst/EFT Pulse Verification Kit
    • Verification/calibration Kit for IEC 61000-4-4
    • INA 265B 50 Ohm & INA 266A 1 k Ohm Termination
    • For peak voltages up to 8.8 kV
    Teseq CDN 3425 Front Side Teseq CDN 3425 Side Top
    Teseq CDN 3425 - Capacitive Coupling Clamp Rental
    • Complies with IEC 61000-4-4 Ed 2 & 3
    • Maximum Burst Voltage 8 kV
    • Used for Test EFT/Burst on Data Lines
    In Stock
    Haefely DIP 116 Front Side Haefely DIP 116 Front
    Haefely DIP 116 - Rent Automatic Dips Transformer
    • Single Phase Dips Transformer
    • Maximum 264 Volts 16 Amps
    • Designed for Haefely AXOS Series
    In Stock
    EM Test PFM 200N100 - Rent Automotive Power Fail Simulator EM Test PFM 200N100 - Rent Automotive Power Fail Simulator
    EM Test PFM 200N100 - Rent Automotive Power Fail Simulator
    • Switch for Power Lines 100 A and Data Lines 2 A
    • Fast Switch with Rise/Fall Times of 200ns
    • Pulses E10 and E13 of the LV 124/LV 148
    In Stock
    Solar LISN 9233 - Front Side 2 Solar LISN 9233 - Back
    Solar LISN 9233-50 - Rent 50μH 50Amp LISN 10kHz –50MHz
    • Frequency 10 kHz – 50 MHz
    • 0.25 µF Coupling Capacitor 
    • Designed for MIL-STD-461D/E/F/G
    EMC Partner TRA3000 C  - Front with Laptop EMC Partner TRA3000 C  - Front
    EMC Partner TRA3000 C - Rent Common Mode Test System
    • Frequency Sweep, Short, & Long Capabilities
    • Laptop with TRA3000 Included with System
    • Includes EMC Partner P3 & EXT-IMU C-SHORT
    In Stock
    Thermo Keytek PK1001D - Top Thermo Keytek PK1001D - Side
    Thermo Keytek PK1001D - Rent 6 kV High Voltage Probe
    • Low EMI Sensitivity
    • 200:1 Attenuation
    • Can be used with Most Oscilloscopes
    In Stock
    Thermo Keytek PK1002D - Top Thermo Keytek PK1002D - Front
    Thermo KeyTek PK1002D - Rent 10 kV HV Differential Probes
    • Low EMI Sensitivity
    • 200:1 Attenuation
    • Can be used with Most Oscilloscopes
    In Stock
    EMC Partner RM32 - ESD3000 30kV Relay Module HV Technologies/EMC Partners RM32 - Relay Module For ESD 3000 ESD gun For 30kV and Automotive Networks
    EMC Partner RM32 - ESD3000 30kV Relay Module
    • Required for 30 kV Testing
    • Connects Directly to Front of Simulator
    • Rented with EMC Partner ESD3000
    In Stock
    Haefely AXOS 8 Front Side Haefely AXOS 8 Front
    Haefely AXOS 8 - Rent 7 kV Transient Test Generator
    • 7 kV Surge, 5.5 kV EFT, & 7 kV 100 kHz Ringwave
    • Built-in CDN Max 264 V/16 A AC or 220 V/10 A DC
    • Compliant to ANSI Coupling Requirements 
    In Stock
    Compliance West MegaPulse D5-PF - Front Side Compliance West MegaPulse D5-PF - Front
    Compliance West MegaPulse D5-PF - Rent Defibrillation Tester
    • IEC 60601-2-25 and -2-27:2011 Generator
    • Integrated Energy Measurement
    • Output Voltage & Polarity From Front Panel
    In Stock