Showing 65 - 80 of 316 products
Quick Access
Return Instructions

Standard Terms

Transient Specialists, Inc. (TSI)

Standard Terms & Conditions:

  • TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  • Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  • Payment terms are net 30 with credit approval. Non-payment or late payment of amounts due will result in interest charges of 1% per month and upon demand, return of the equipment.
  • The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  • In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem.  Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  • The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  • The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  • The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  • In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  • The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  • This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
  •  

    FAQ
    Solar MIL-STD-461 CS116 & CS115 Front Solar MIL-STD-461 CS116 & CS115 Front Side v2
    Solar MIL-STD-461 CS116 & CS115 Accessory Package
    • Includes Injection Probes, Monitoring Probe, & Attenuators
    • Common MIL-STD-461 CS116 & CS115 Required Accessories
    • Ideal for Rental with Solar 9354-2 & 9355-1 Generators
    In Stock
    Solar 9355-1 - Front Side Solar 9355-1 - Front
    Solar 9355-1 - Rent MIL-STD-461 CS115 Pulse Generator
    • 2 kV 2 ns Rise/Fall Time Pulse Generator 
    • Compliant MIL-STD-461 CS115 Transients 
    • Selectable Pulse Rate .6 to 150 per second
    In Stock
    Solar 9354-2 - Front Side Solar 9354-2 - Front
    Solar 9354-2 - Rent MIL-STD-461 CS116 Transient Generator
    • 3 Double Exponential Pulse 6.4 μs, 70 μs, & 120 μs
    • 6 Damped Sinusoidal Pulses 10 kHz - 100 MHz 
    • Compliant to MIL-STD-461 CS116
    In Stock
    Solar 8282-1 - Front Side Solar 8282-1 - Front
    Solar 8282-1 - Rent MIL-STD-461 CS06 Transient Generator
    • 600 V peak amplitude 0.15, 5 & 10 µS spikes
    • Adjustable Pulse Position on AC Power Lines 
    • Compliant to MIL-STD-461 Method CS06
    Solar 7054-1 - Front Side Solar 7054-1 - Front
    Solar 7054-1 - Rent DO-160G 600 Volt Spike Generator
    • Output 10 Volts to 600 Volts into 5 Ω or less
    • Compliant Spike Generator to DO-160 sec 17
    • Typically Rented with Solar 2201 Matching Transformer
    In Stock
    Solar 7032-1 - Front Side Solar 7032-1 - Front
    Solar 7032-1 - Rent Power Line Isolation Transformer
    • Rated at 800 W 50-60 Hz
    • Socketed Transformer
    In Stock
    Solar 6512-106R Front Solar 6512-106R - Rent 10μF Feed-Thru Capacitor
    Solar 6512-106R - Rent 10μF Feed-Thru Capacitor
    • 10 μF Capacitors for Susceptibility Tests 
    • Maximum Current 100 Amps 
    • 275 VAC 60Hz, 250 VAC 400Hz, 600 VDC
    In Stock
    Solar 6220-4A - Front Side Solar 6220-4A - Front
    Solar 6220-4A - Rent 50 A 4 kV Audio Isolation Transformer
    • 4000 Volt Audio Transformer
    • Max 50 Amps AC or DC; 100 Watts
    • Similar to 6220-1 with Higher Voltage
    In Stock
    Solar 2854-1 - Front Side Solar 2854-1 - Front
    Solar 2854-1 - Rent MIL-STD-461 CS106 Spike Generator
    • 10 Volt - 400 Volt Output Levels into 5 Ohms
    • MIL-STD-461 CS106 Compliant Generator
    • Compliant to MIL-STD-461 CS106
    Solar 2201-1 - Front Side Solar 2201-1 - Front Above
    Solar 2201-1 - Rent Avionic Impedance Matching Transformer
    • Compliant Transformer to DO-160 Sec. 17
    • Used with Solar 7054 Spike Generator  
    • EUT Max 12 A for 50 Hz, 60 Hz & 6 A for 400 Hz
    EM Test LD 200N - Front Side EM Test LD 200N - Front
    EM Test LD 200N - Rent Load Dump Generator
    • Generators Clipped Load Dump Pulses
    • Tests to ISO 7637-2 & ISO 16750-2 Load Dump
    • Built-in CDN Max 80 Volts 30 Amps
    In Stock
    EM Test CA ISO Load Resistor device for pulse verification
    EM Test CA ISO - Rent Resistor Kit for Load Dump Verification
    • Includes all Required Load Resistor Values
    • Resistors with very low inductance
    • Highly accurate resistors (+/-1%)
    EM Test CA EFT Kit - Attenuators EM Test CA EFT Kit - Case & Accessories
    EM Test CA EFT Kit - Rent EFT/Burst Pulse Verification Kit
    • Calibration Kit Designed for EM Test Systems
    • Compliant to IEC 61000-4-4 & ISO 7637, Annex D
    • Includes KW 50 (50Ω) & KW1000 (1kΩ)
    In Stock
    EM Test ACC front side EM Test ACC - Side
    EM Test ACC - Rent Automotive Capacitive Coupling Clamp
    • ISO 7637-3 & OEM Compliant Solution
    • Accepts Cables up to 40mm Diameter
    • Solution for Testing Shielded Signal Lines
    In Stock
    EM Test AutoWave - Front Side EM Test AutoWave - Front
    EM Test AutoWave - Rent 2 Channel Waveform Generator
    • 2-channel Arbitrary Waveform Generator
    • Dual-Processor-Technology, 500kS/s sample rate
    • Library of Standard Test Routines
    In Stock
    EM Test VDS 200N15 - Front Side EM Test VDS 200N15 - Front
    EM Test VDS 200N15 - Rent 15 Amp Battery Simulator
    • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
    • Maximum 60 Voltage 15 Amps
    • Voltage Drop Simulator with Low Output Impedance