SAE Automotive/Vehicle Test Transients & Immunity - J1113 & J1455
SAE Vehicle ESD Testers
ISO 10605 ESD Guns
Vehicle Transients
Conducted Immunity
Radiated Immunity Equipment
Amps & Antennas
Vehicle Test Accessories
EMC/EMI Test Equipment
ISO 11452
Radiated Immunity Rentals
- Includes NSG 5500, PA 5840, & CDN 400
- ISO 7637-2 & ISO 7637-3 Tests
- Battery Simulators up to 60 V 100 A
- -15 to +60 Volts 25 Amps Continuous
- High Bandwidth up to 150 kHz
- 75 Amps Inrush Current Capability
- Test System for ISO 7637-2/3 Requirements
- Battery Simulators Available up to 100 Amps
- Pre-programmed International & OEM Tests
- Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
- Maximum 60 Voltage 15 Amps
- Voltage Drop Simulator with Low Output Impedance
- Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
- Maximum 60 Voltage 30 Amps
- Voltage Drop Simulator with Low Output Impedance
- Micropulse Generator for ISO, JASO, & SAE
- ISO 7637-2 Pulses 1, 2a, 3a, & 3b
- Built-in CDN Max 80 Volts 100 Amps
- Micropulse Generator for ISO, JASO, & SAE
- ISO 7637-2 Pulses 1, 2a, 3a, & 3b
- Built-in CDN Max 80 Volts 50 Amps
- 2-channel Arbitrary Waveform Generator
- Dual-Processor-Technology, 500kS/s sample rate
- Library of Standard Test Routines
- ISO 7637-3 & OEM Compliant Solution
- Accepts Cables up to 40mm Diameter
- Solution for Testing Shielded Signal Lines
- Calibration Kit Designed for EM Test Systems
- Compliant to IEC 61000-4-4 & ISO 7637, Annex D
- Includes KW 50 (50Ω) & KW1000 (1kΩ)
- Includes all Required Load Resistor Values
- Resistors with very low inductance
- Highly accurate resistors (+/-1%)
- Generators Clipped Load Dump Pulses
- Tests to ISO 7637-2 & ISO 16750-2 Load Dump
- Built-in CDN Max 80 Volts 30 Amps
- 10 Ohm & 100 Ohm Power Calibration Loads
- 1 Ohm & 1000 Ohm Data Line Calibration Loads
- Designed for up to 48 Volt Battery Lines
- Provides LV124 E-01 to E-15 Pulses
- DUT Capabilities up to 100 Amps
- Includes Software & Verification Kits
- Many pulses of LV124/Other OEMs (100A)
- Includes - Accessory Kit, Autowave & PA 5840
- Rent PFM200N100 for Additional OEM Pulses
- -60 to +60 Volts 50 Amps Continuous
- Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
- Extended Range 80 Volts 40 Amps
