Description
Overview
ETS-Lindgren's Model HI-6006 Electric Field Probe is a fully intelligent sensor enabling fast and accurate EMF measurements with industry leading performance specications. Optical coupling to a variety of readout options makes this probe ideally suited for a wide range of Field monitoring applications.
Designed to be single range reading, the HI-6006 RF eld probe can read data continuously over the entire dynamic range. Data values for each axis (X, Y, and Z) can be read individually or summed. A unique feature of the HI-6006 is the replaceable battery. This battery allows the user to replace the battery when necessary, without requiring additional calibration. Simple in-eld synchronization of the HI-6006 is all that is required for proper battery level monitoring.
The HI-6100 Field Monitor provides manual functions and programmed control via IEEE-488 and RS232 Serial Data Interfaces. Readings from up to four eld probes can be displayed simultaneously. The EMCenter™ Modular RF Platform along with the EMSense™ interface card can be used with the HI-6000 series Field probes as a eld monitor in addition to its capability as a system level platform. For direct connection to a PC, either the HI-4413P Serial or the HI-4413USB interfaces are available.
Data SheetUser ManualSpecifications
Frequency Range |
100kHz to 6GHz |
Detection |
Isotropic (X, Y and Z Axis Readings) |
Frequency Response:: (Typical) |
500 kHz to 2 GHz +1.0, -2.5 dB 2 to 5.5 GHz +3.5, -4.5 dB 5.5 to 6 GHz +2.0, -6.0 dB |
Frequency Response with Correction: |
100 kHz to 6 GHz ± 0.9 dB |
Dynamic Range |
0.5 to 800 V/m (Single Range)
|
Resolution | 0.01 V/m |
Isotropic Deviation: |
± 0.5 dB @ 400 MHz |
Linearity: |
± 0.5 dB (1 to 800 V/m) |
Sample Rate (Typical): |
70 Samples/Second Maximum |
Overload Withstand: | >1500 V/m CW |
Battery: |
4.8 V NiMH, up to 8 Hours of operation |
Physical Interface: | Duplex Optical Fiber (200 Micron Multimode); FSMA Connectors. Integral 1m Optical Cable |
Battery Charger: |
100-240 VAC Universal Input; 3-Hour Charge from Full Depletion |
Cubical Housing Height: | 32 mm (1.26 in) |
Sensor Protection Caps Height: |
43 mm (1.69 in) |
Linearity: |
± 0.5 dB (1 to 800 V/m) |
Sample Rate (Typical): |
70 Samples/Second Maximum |
Overload Withstand: | >1500 V/m CW |
Battery: |
4.8 V NiMH, up to 8 Hours of operation |
Linearity: |
± 0.5 dB (1 to 800 V/m) |