Conducted Emissions Test Equipment Rental
Rent LISNs & ANs
All LISN & Equipment
50uH LISNs
Rent AC Equipment
5uH LISNs/AN
Rent DC Equipment
Emissions Current Probes
Rent Probes & Fixtures
Harmonics & Flicker
Test Equipment Rentals
All EMC Test Equipment
View Rental Systems
- Max 1000 V/200 A DC or 700 V/200 A AC
- Includes HVSE 8600 Shielded Enclosure
- 5uH LISN in Accordance with CISPR 25
- Electronic Switch, Artificial Network, & RS-Box
- BS 200N100 Electronic switch, 60V DC/100A
- AN 200N100 1,000V DC, 250V AC (up to 1kHz)
- Kit Includes Analyzer, LISN, & Transient Limiter
- EMCO 3810 Max 125 Volts 10 Amps AC
- Compliant for FCC Part 15 Subpart B
- Frequency Range 9 kHz to 30 MHz
- 50µH V-network Max 16 Amps /240 VAC
- Built-in Transient Limiter, Attenuator, & Filters
- Frequency Range 9 kHz - 3.2 GHz
- RBW 10 Hz & DANL <-161 dBm (Typical)
- Includes License for EMI Software
- Max 1000 Volts 100 Amps DC (150 Amp Peak)
- ISO 7637-2, ISO 11452-4, & CISPR 25 Compliant
- Switch for Selecting Testing Requirements
- Frequency Range 9 kHz to 30 MHz
- Max 270 V/20 A AC or 380 V/14 A DC
- Fully Compliant with CISPR 16-1-2/ANSI C63
- Max 1000 V/150 A DC or 500 V/150 A AC
- HV Compliant to ISO 7637-4 & CISPR 25
- Jumpers Provide LISN Path Configuration
- Frequency Range: 9 kHz to 30 MHz
- Maximum 10 Amps 125 Volts AC
- Inductors: 250 & 50 Microhenry (air-core)
- 30 MHz to 1 GHz Biconical Measurement Antenna
- Small, Lightweight Device, & Includes Tripod
- Max Continuous RF Input Power: 2 Watts
- Designed for Flicker & Harmonics Testing
- Complete Test System for IEC 61000-3-2 and 3-3
- Max Single Phase EUT 300 Volts 16 Amps
- Frequency Range 9 kHz - 7.5 GHz
- Resolution bandwidth (RBW): 1 Hz~3 MHz
- Displayed Average Noise Level -165 dBm/Hz
- Frequency 10 kHz – 50 MHz
- 0.25 µF Coupling Capacitor
- Designed for MIL-STD-461D/E/F/G
- Frequency Range 10 kHz – 400 MHz
- Max 480 V/50 A AC or 676 V/35 A DC
- Inductance 5μH & Coupling Capacitor . 0.25 µF
- 10 μF Capacitors for Susceptibility Tests
- Maximum Current 100 Amps
- 275 VAC 60Hz, 250 VAC 400Hz, 600 VDC
- Conducted Comb Generator (100 kHz or 500 kHz)
- Frequency Range: 100 kHz - 400 MHz
- Used for Verificaiton of Conducted Emissions Setup
