Ask Us About: Conducted Emissions Test Equipment Rental
Transient Specialists
Filters
Recent Views
Conducted Emissions Test Equipment Rental
Showing 17 - 32 of 39 products
Display
View
Fischer F-33-1 - Rent 250 MHz Current Monitoring Probe
- Frequency 10 kHz - 250 MHz
- Includes FCC-MPCF-3 Calibration Fixture
- Internal Diameter of 32 mm
TekBox TBCP2 - Rent 750 MHz Current Monitoring Probe
- Frequency 10 kHz - 750 MHz
- Includes TBCP4-750 Calibration Fixture
- Internal Diameter of 32 mm
Siglent SSA3032X Plus - Rent 3.2 GHz Spectrum Analyzer
- Frequency Range 9 kHz - 3.2 GHz
- Resolution bandwidth (RBW) 1 Hz~1 MHz
- Tracking Generator 100 kHz – 3.2 GHz
Com-Power LIT-930A - Rent 9kHz-30MHz Transient Limiters
- Frequency Range 9kHz to 30MHz (Pass-band)
- Prevents Damage to Analyzer & 10 dB Attenuation
- Typically Rented with LISN/Artificial Network
TekBox TBFL1 - Rent Transient Limiter & 10dB Attenuator
- Frequency Range 9 kHz to 600 MHz (Pass-band)
- Prevent Damage to Instrument from Voltage Spikes
- Rented with LISN/AN or Analyzer
TekBox TBLM01 - Rent LISN Mate Noise Splitter
- Noise Splitter into Common & Differential Mode
- Frequency Range 30 kHz – 110 MHz
- Commonly used with 5uH LISNs
Fischer F-33-2 - Rent 250 MHz Current Monitoring Probe
- Frequency 1 kHz - 250 MHz
- Includes FCC-MPCF-3 Calibration Fixture
- Internal Diameter of 32 mm
Teseq SME HV-AN 150 - AN Shielded Metal Enclosure
- Designed for use with Teseq HV-AN 150s
- Rugged Design using Stainless Steel
- Compliant to HV CISPR 12/25 & ISO 7637-4
Schwarzbeck HVSE 8600 - Automotive Shielded Enclosure
- Designed for use with NNHV 8123-200
- Compliant to HV CISPR 25 & BMW GS 95025-1
- Rented with set of NNHV 8123-200 LISNs
EM Test BS 200N100 - Electronic Switch for Voltage Transient Testing
- Electronic Switch Accordance with ISO 7637 Part 2
- Rented with EM Test Transient Emissions Set
- Max 60 Volts & 100 Amps Cont. (400A @ 200ms)
Teseq EXT 10uF - 10 µF capacitor for RTCA/DO-160G
- Designed for RTCA/DO-160 Testing
- 10uF/1000 Volt Capacitor
- Rented with HV-AN 150 LISN
Com-Power LI-1100C - Rent 50µH 100 Amp 440 VAC LISN
- Frequency Range 150 kHz to 30 MHz
- Max 440 Volts AC & 620 Volts DC
- Fully Compliant with CISPR 16-1-2/ANSI C63
Schwarzbeck NNLK 8129 - Rent 50uH 200 Amp LISN
- Impedance 50 µH || 50 Ω
- Frequency Range 150 kHz – 30 MHz
- Maximum: 200 Amps 700 Volts AC
Com-Power LI-150C - Rent 50µH 50Amp 270VAC LISN
- LISN 150 kHz - 30 MHz 50Amps/270 Volts AC
- CISPR 16-1-2 & ANSI C63.4 Compliant
- Transient Limiters Available with Rental
EM Test DPA 500N - Rent Harmonics & Flicker Power Analyzer
- IEC 61000-3-2/3 Compliant Analyzer
- Built-in Lumped Flicker Impedance
- Maximum: 530 Volts 16 Amps Continuous
Rigol DSA815-TG - Rent 1.5 GHz Spectrum Analyzer
- Frequency Range 9 kHz - 1.5 GHz
- RBW 10 Hz & DANL <-155 dBm (Typical)
- Includes License for EMI Software
39 products
Conducted Emission Test Equipment
Rental Test Equipment
Conducted emissions testing focuses on EMI noise or interference coming from an electronic or electric device via connection, typically through cabling or wires. There are several different categories of equipment, however harmonics and flicker, as well as CISPR,FCC, ISO 7637, & MIL-STD direct noise emissions levels via power lines. Conducted emissions test along power lines typically involve a power supply, LISN(s), transient limiter, and spectrum analyzer. We offer rentals of both commonly tested emissions test equipment and provide solutions for a variety of different applications, including commercial, automotive, and military.
Filters (0)
Transient Specialists
Filters