Showing 1 - 13 of 13 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
EMC Partner AVI3000 Front Sid EMC Partner AVI3000 Front
EMC Partner AVI3000 - Rent MIL-STD & DO-160 Level 3 Generator
  • RTCA/DO-160 Section 22, Level 3 & CS117 Lvl.1 
  • Capabilities for Testing Waveforms 1 - 6 
  • Includes CN-BT7 Injection Probe & TEMA3000 Software
In Stock
EM Test UCS 200N50 - Front Side EM Test UCS 200N50 - Front
EM Test UCS 200N50 - Rent Microburst Generator 50 Amp CDN
  • Micropulse Generator for ISO, JASO, & SAE
  • ISO 7637-2 Pulses 1, 2a, 3a, & 3b
  • Built-in CDN Max 80 Volts 50 Amps
In Stock
Solar 9354-2 - Front Side Solar 9354-2 - Front
Solar 9354-2 - Rent MIL-STD-461 CS116 Transient Generator
  • 3 Double Exponential Pulse 6.4 μs, 70 μs, & 120 μs
  • 6 Damped Sinusoidal Pulses 10 kHz - 100 MHz 
  • Compliant to MIL-STD-461 CS116
In Stock
OEM LV124 EM Test System - Front OEM LV124 Test System - Teseq & EM Test
OEM LV124 EM Test System - Rent Automotive Pulse Generators
  • Provides LV124 E-01 to E-15 Pulses 
  • DUT Capabilities up to 100 Amps 
  • Includes Software & Verification Kits
EM Test AutoWave - Front Side EM Test AutoWave - Front
EM Test AutoWave - Rent 2 Channel Waveform Generator
  • 2-channel Arbitrary Waveform Generator
  • Dual-Processor-Technology, 500kS/s sample rate
  • Library of Standard Test Routines
In Stock
EMC Partner CN-BT7 Front Side EMC Partner CN-BT7 Front
EMC Partner CN-BT7 - Indirect Lightning Injection Probe
  • Large aperture 5.5 cm x 8 cm
  • Rented With EMC Partner AVI System
  • Used as Coupler for 5 Waveforms
EM Test AMP 200N2 Front Side EM Test AMP 200N2 Front
EM Test AMP 200N2 - Rent LF Signal & Amplifier DC - 500 KHz
  • Output Max. 160 V p-p, 50 V rms
  • Output Current Max. 18 A rms
  • Automatic Closed Loop Test Procedures
Solar 9554-1M/6M - Rent Variable Frequency Module Solar 9554-1M/6M - Rent Variable Frequency Module
Solar 9554-1M/6M - Rent Variable Frequency Module
  • Covers 1 MHz to 6 MHz Frequency Range
  • Used with Solar 9354-2/-1 Pulse Generators 
  • Meets Requirements for MIL-STD-461 CS116
In Stock
EM Test CN 200N100 - Front Side EM Test CN 200N100 - Front
EM Test CN 200N100 - Rent 100 Amp Audio Transformer
  • Frequency response 10 Hz to 500 kHz
  • Audio power up to 3 x 200 W
  • Turns ratio 2:1 step down
In Stock
EMC Partner AVI-LV3 - Front Side EMC Partner AVI-LV3 - Front
EMC Partner AVI-LV3 - Rent MIL-STD & DO-160 Level 3 Generator
  • RTCA/DO-160 Section 22, Level 3 & CS117 Lvl.1 
  • Capabilities for Testing Waveforms 1 - 6 
  • Includes CN-BT7 Injection Probe & TEMA3000 Software
EM Test AutoWave-WR - Front Side EM Test AutoWave-WR - Front
EM Test AutoWave-WR - Rent 4-Channel Generator & Recorder
  • 4-channel Arbitrary Waveform Generator
  • 2-channel Transient Waveform Recorder
  • Simultaneous Recording/Generation
In Stock
EMC Partner CN-GI-CI-V Front Side EMC Partner CN-GI-CI-V Front
EMC Partner CN-GI-CI-V - Cable Bundle Voltage Injection Clamp
  • Designed for WF4, WF5A (voltage)
  • Level 5 for Single & Multiple Stroke Tests
  • Rented with AVI Test Generator
In Stock
EMC Partner MIL-MG3 - Front Side EMC Partner MIL-MG3 - Front
EMC Partner MIL-MG3 - Rent MIL-STD & DO-160 Test System
  • Exceeds maximum test levels in MIL-STD-461
  • Single Generator for CS115 & CS116 Requirements
  • Automated Test Routines from Front Panel