Showing 1 - 16 of 23 products out of 44
Quick Access
Return Instructions

Standard Terms

Transient Specialists, Inc. (TSI)

Standard Terms & Conditions:

  • TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  • Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  • Payment terms are net 30 with credit approval. Non-payment or late payment of amounts due will result in interest charges of 1% per month and upon demand, return of the equipment.
  • The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  • In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem.  Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  • The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  • The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  • The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  • In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  • The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  • This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.

    •  

    FAQ
    EM Test LD 200N - Front Side EM Test LD 200N - Front
    EM Test LD 200N - Rent Load Dump Generator
    • Generators Clipped Load Dump Pulses
    • Tests to ISO 7637-2 & ISO 16750-2 Load Dump
    • Built-in CDN Max 80 Volts 30 Amps
    In Stock
    EM Test VDS 200N15 - Front Side EM Test VDS 200N15 - Front
    EM Test VDS 200N15 - Rent 15 Amp Battery Simulator
    • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
    • Maximum 60 Voltage 15 Amps
    • Voltage Drop Simulator with Low Output Impedance
    EM Test UCS 200N50 - Front Side EM Test UCS 200N50 - Front
    EM Test UCS 200N50 - Rent Microburst Generator 50 Amp CDN
    • Micropulse Generator for ISO, JASO, & SAE
    • ISO 7637-2 Pulses 1, 2a, 3a, & 3b
    • Built-in CDN Max 80 Volts 50 Amps
    In Stock
    EM Test UCS 200N100.2 - Front Side EM Test UCS 200N100.2 - Front
    EM Test UCS 200N100.2 - Rent Transient Generator 100 Amp CDN
    • Micropulse Generator for ISO, JASO, & SAE
    • ISO 7637-2 Pulses 1, 2a, 3a, & 3b
    • Built-in CDN Max 80 Volts 100 Amps
    In Stock
    EM Test VDS 200N30 - Front Side EM Test VDS 200N30 - Front
    EM Test VDS 200N30 - Rent 30 Amp Voltage Drop Simulator
    • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
    • Maximum 60 Voltage 30 Amps
    • Voltage Drop Simulator with Low Output Impedance
    EM Test CA EFT Kit - Attenuators EM Test CA EFT Kit - Case & Accessories
    EM Test CA EFT Kit - Rent EFT/Burst Pulse Verification Kit
    • Calibration Kit Designed for EM Test Systems
    • Compliant to IEC 61000-4-4 & ISO 7637, Annex D
    • Includes KW 50 (50Ω) & KW1000 (1kΩ)
    In Stock
    EM Test CA ISO Load Resistor device for pulse verification
    EM Test CA ISO - Rent Resistor Kit for Load Dump Verification
    • Includes all Required Load Resistor Values
    • Resistors with very low inductance
    • Highly accurate resistors (+/-1%)
    EM Test ACC front side EM Test ACC - Side
    EM Test ACC - Rent Automotive Capacitive Coupling Clamp
    • ISO 7637-3 & OEM Compliant Solution
    • Accepts Cables up to 40mm Diameter
    • Solution for Testing Shielded Signal Lines
    In Stock
    EM Test CA LV 124 - Front in case EM Test CA LV 124 - Front Side in case
    EM Test CA LV 124 - Rent LV 124 Verification Kit for PFM 200N100
    • 10 Ohm & 100 Ohm Power Calibration Loads
    • 1 Ohm & 1000 Ohm Data Line Calibration Loads
    • Designed for up to 48 Volt Battery Lines
    In Stock
    EM Test VDS 200Q50.2 - Front Side EM Test VDS 200Q50.2 - Front
    EM Test VDS 200Q50.2 - Rent 50 Amp Battery Simulator
    • -20 to +60 Volts 50 Amps Continuous
    • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
    • Extended Range 80 Volts 40 Amps
    EM Test RCB 200N1 - Front Side EM Test RCB 200N1 - Front
    EM Test RCB 200N1 - Rent FMC1278 Transient Generator
    • Compliant Pulses to FMC1278 & EMC-CS-2009.1 
    • Pulses CI 220: A1, A2-1, A2-2, C-1 and C-2
    • Pulses RI 130: A2-1, A2-2 with Coupling Test Fixture
    In Stock
    EM Test PFM 200N100 - Rent Automotive Power Fail Simulator EM Test PFM 200N100 - Rent Automotive Power Fail Simulator
    EM Test PFM 200N100 - Rent Automotive Power Fail Simulator
    • Switch for Power Lines 100 A and Data Lines 2 A
    • Fast Switch with Rise/Fall Times of 200ns
    • Pulses E10 and E13 of the LV 124/LV 148
    In Stock
    EM Test AutoWave - Front Side EM Test AutoWave - Front
    EM Test AutoWave - Rent 2 Channel Waveform Generator
    • 2-channel Arbitrary Waveform Generator
    • Dual-Processor-Technology, 500kS/s sample rate
    • Library of Standard Test Routines
    In Stock
    OEM LV124 EM Test System - Front OEM LV124 Test System - Teseq & EM Test
    OEM LV124 EM Test System - Rent Automotive Pulse Generators
    • Provides Pulses LV 124 E-01 to E-15 (2013-02) 
    • Includes VDS 200Q, AutoWave, & PFM 200N
    • Can be Configured for Specific Pulses/Requirements 
    LV124 EM Test System - OEM Automotive Solution (100Amp)
    LV124 EM Test System - OEM Automotive Solution (100Amp)
    • Many pulses of LV124/Other OEMs (100A)
    • Includes - Accessory Kit, Autowave & PA 5840
    • Rent PFM200N100 for Additional OEM Pulses 
    In Stock
    EM Test AN 200N100 Front Side EM Test AN 200N100 Front Top
    EM Test AN 200N100 - Rent 100 Amp 5uH DC LISN
    • Max 1000 Volts 100 Amps DC (150 Amp Peak)
    • ISO 7637-2, ISO 11452-4, & CISPR 25 Compliant
    • Switch for Selecting Testing Requirements
    In Stock