Coupling Decoupling Network (CDN) Equipment Rental
Power Mains CDNs
Rent CDNs designed for power lines for both surge and EFT up to 125Amps. Our inventory of CDNs offer a variety of different DUT power requirements for IEC 61000-4-5 compliance.
Data Line/IO Couplers
Get fast deliveries on a variety of data line/communication CDNs designed for surge testing on different cables types including high speed, shielded & unshielded cables.
Conducted RF Equipment
Rent conducted RF Coupling Decoupling Networks (CDNs) designed for testing a variety of different cables including power and communication lines to IEC 61000-4-6 as well as many others.
Mains Power CDNs
Surge & EFT Coupling
Data Line/IO CDNs
Telecom Surge/Ringwave
Conducted RF CDNs
Radio-Frequency Injection
Coupling Clamps (CCLs)
Current Injection Clamps
Current Injection Probes
Radio-Frequency CIP
- Frequency 150 kHz - 230 MHz
- Max 400 Volts 32 Amps AC
- Designed for 5 AC Supply Lines
- Frequency 150 kHz - 230 MHz
- Max 63 V/1.5 A AC or 100 V/1.5 A DC
- For 4 Unscreened Unbalanced Lines
- Frequency 150 kHz - 230 MHz
- Max 63 V/1.5 A AC or 100 V/1.5 A DC
- For 4 Unscreened Unbalanced Lines
- Max: 690 Volts Phase to Phase, 63 Amps
- Rented with Teseq NSG 3150 Test System
- Compliant for IEC 61000-4-5 Coupling Methods
- Frequency Range: DC
- Max 63 V AC or 100 V DC (200 mA per Line)
- Rented with Common Mode Test System
- Frequency Range: 15 Hz to 150 kHz
- Max 63 V AC or 100 V DC (200 mA per Line)
- Rented with Common Mode Test System
- Frequency 150 kHz - 80 MHz
- Max 500 V/100 A AC or 600 V/100 A DC
- Designed for 5 AC Supply Lines
- Allows for Testing 1000 V DC / 63 Amps
- Connects to Back of CDN 3153-S63
- Rented with Teseq 3150 Test System
- Frequency 150 kHz - 230 MHz
- Max 250 Volts 16 Amps AC/DC
- Designed for 2 or 3 Supply Lines
Coupling Decoupling Networks (CDNs)
Conducted RF & Transient Immunity
Coupling and decoupling are the methods of injecting, and removing, a waveform or signal onto the intend line or cable to verify the impact that it has onto the equipment under test (EUT). There is a variety of different methods for achieving this depending upon the required testing criteria or standard. This is commonly required for conducted immunity testing and there are a variety of different testing requirements for the associated equipment facilitating it. The challenge with this type of equipment is finding the network that best fits both the standard and type of line that the testing is anticipated to be done on.
Common Standards
There are many standards that require the ability to inject pulses/signals onto associated cables or lines. It is important to note that standards often place different requirements on the methodology and equipment used to achieve this.
EN/ IEC 61000-4 Series
- EN IEC 61000-4-4 - Burst / Electronic Fast Transient (EFT)
- EN IEC 61000-4-5 - Combination Wave / Surge
- EN IEC 61000-4-6 - Conducted RF
ANSI / IEEE Series
- ANSI IEEE C62.41 - Surge
- ANSI IEEE C37.90 - Surge Withstand Capability (SWC)
CISPR Standards
- CISPR 15/EN 55015
Methods of applying RF per IEC 61000-4-6
