Showing 1 - 14 of 14 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
Teseq NSG 3060 Front Side Teseq NSG 3060 Front
Teseq NSG 3060 - Teseq 6.6 kV Transient Test System
  • 6.6 kV Surge, 4.8 kV EFT, & 6.6 kV 100 kHz Ringwave
  • External Single Phase CDN Max 270 V/16 A AC or DC
  • Laptop with WIN 3000 Software Included
Buy Used-$21,000
In Stock
Teseq NSG 3040 - Rent 4.4 kV Surge 4.8 kV EFT Generator Teseq NSG 3040 - Rent 4.4 kV Surge 4.8 kV EFT Generator
Teseq NSG 3040 - Rent 4.4 kV Surge 4.8 kV EFT Generator
  • 4.4 kV Surge & 4.8 EFT Immunity Test System
  • Built-in single phase CDN Max 260 V/16 A AC or DC
  • Model/Version: NSG 3040-IEC
In Stock
Haefely AXOS 8 Front Side Haefely AXOS 8 Front
Haefely AXOS 8 - Rent 7 kV Transient Test Generator
  • 7 kV Surge, 5.5 kV EFT, & 7 kV 100 kHz Ringwave
  • Built-in CDN Max 264 V/16 A AC or 220 V/10 A DC
  • Compliant to ANSI Coupling Requirements 
In Stock
Haefely AXOS5 - Front Side Haefely AXOS5 - Front
Haefely AXOS5 - Rent 5 kV Surge & EFT Generator
  • 5 kV Surge & EFT Immunity Test System
  • Built-in CDN Max 264 V/16 A AC or 220 V/10 A DC
  • Capabilities for Voltage Dips Testing with DIP 116
Monthly Rental-$1,400
In Stock
EMC Partner IMU4000 - Front Side EMC Partner IMU4000 - Front
EMC Partner IMU4000 - Rent 4kV EFT, Surge, & Dips System
  • 4 kV Surge & 4.4 kV EFT/Burst Capabilities
  • CDN Max 280 V/16 A AC or 300 V/16 A DC
  • Capabilities for Voltage Dips up to 6 Amps
Teseq CDN 3083-S100 - Front Side Teseq CDN 3083-S100 - Side Above
Teseq CDN 3083-S100 - Rent 3-Phase 100 Amp Surge CDN
  • Coupler for Surge to IEC 61000-4-5
  • Max 100 Amps 690 V AC or 620 V DC
  • Manual Coupler for NSG 3060 or NSG 3040
Buy Used-$17,000
In Stock
Teseq CDN 3083-B100 - Front Side Teseq CDN 3083-B100 - Side Top
Teseq CDN 3083-B100 - Rent 100 Amp 3-Phase Burst CDN
  • Designed for Burst to IEC 61000-4-4
  • Max 100 Amps 690 V AC or 1,000 V DC
  • Handles up to 8.8 kV EFT/Burst Pulses
In Stock
Teseq CDN 3063 - Front Side Teseq CDN 3063 - Rent 3-Phase 480 Volt 32 Amp CDN
Teseq CDN 3063 - Rent 3-Phase 480 Volt 32 Amp CDN
  • Coupler for Surge, EFT, & Ringwave Pulses
  • Maximum 480 Volts 32 Amps AC/DC
  • Automatic Coupler for NSG 3060/NSG 3040
Buy Used-$11,000
In Stock
EM Test Coupling NX7 bsr-3-480-32 - Front Side EM Test Coupling NX7 bsr-3-480-32 - Front
EM Test Coupling NX7 bsr-3-480-32 - Rent 3-Phase 32Amp CDN
  • Coupler for Surge, EFT, & Ringwave Pulses
  • Max 480 Volts 32 Amps AC
  • Automatic Coupler for NX5/NX7 Systems
Teseq NSG 3060A Front Side Teseq NSG 3060A Front
Teseq NSG 3060A - Teseq Transient Generator Test System
  • Configured for 6.6 kV Surge & 5.5 kV EFT/Burst
  • Built-in single phase CDN Max 300 V/16 A AC or DC
  • Model: NSG 3060A-IEC (IEC 61000-4-4/5)
In Stock
Coupling NX7 bsr-3-690-125.3 - 125Amp 3-Phase Surge & EFT CDN Coupling NX7 bsr-3-690-125.3 - 125Amp 3-Phase Surge & EFT CDN
Coupling NX7 bsr-3-690-125.3 - 125Amp 3-Phase Surge & EFT CDN
  • Coupler for Surge, EFT, & Ringwave Pulses
  • Max 125 Amps 690 V AC or 1,000 V DC
  • Transient Generator Mounted in Rack
EMC Partner IMU-MGS - Front Side EMC Partner IMU-MGS - Front
EMC Partner IMU-MGS - Rent 4 kV Surge & EFT Generator
  • 4.1 kV Surge & 4.4 kV EFT/Burst Generator 
  • Built-in CDN Max 300 Volts 16 Amps AC & DC
  • Model: IMU-MGS F4-S4-P
In Stock
EM Test PCD 8 S-3-690-1000-100 Front Side EM Test PCD 8 S-3-690-1000-100 Side
EM Test PCD 8 S-3-690-1000-100 - Rent 100Amp Manual Surge CDN
  • Coupler for Surge to IEC 61000-4-5
  • Max 100 Amps 690 V AC or 1,000 V DC
  • Manual Coupler for NX5/NX7 Systems
In Stock
EM Test PCD 8 B-3-690-1000-100 Front Side EM Test PCD 8 B-3-690-1000-100 Side
EM Test PCD 8 B-3-690-1000-100 - Rent 100Amp EFT/Burst CDN
  • Coupler for EFT/Burst to IEC 61000-4-4
  • Max 100 Amps 690 V AC or 1,000 V DC
  • Manual Coupler for NX5/NX7 Systems
In Stock