Home > Automotive EMC Test Equipment - EMI Rentals > EM Test AMP 200N2
EM Test AMP200N - Stock Side Front EM Test AMP200N - Front EM Test AMP200N - Back EM Test AMP200N - Front Top
EM Test AMP200N - Stock Side Front
EM Test AMP200N - Front
EM Test AMP200N - Back
EM Test AMP200N - Front Top

EM Test AMP 200N2

Rent LF Signal & Amplifier DC - 500 KHz
  • Output Max. 160 V p-p, 50 V rms
  • Output Current Max. 18 A rms
  • Automatic Closed Loop Test Procedures
  • Built-in DDS Sinus Signal Generator up to 500 kHz
  • Supports Magnetic Field Tests up to 1100 A/m
Got Questions? Speak to an Expert +1 630-887-0329
Two FREE days transit with every rental

Related Equipment

EM Test AutoWave-WR - Front Side EM Test AutoWave-WR - Front
EM Test AutoWave-WR
Rent 4-Channel Waveform Generator
In Stock
EM Test Autowave - Front Side EM Test Autowave - Front
EM Test AutoWave
Rent 2 Channel Waveform Generator
In Stock
EM Test PFM 200N100 - Font Side EM Test PFM 200N100 - Font Top Side
EM Test PFM 200N100
Rent Automotive Power Fail Simulator
In Stock
EM Test VDS 200Q10 - Front Side Stock EM Test VDS 200Q10 - Front
EM Test VDS 200Q10
Rent 10 Amp Battery Simulator
EM Test VDS 200N30 - Front Side EM Test VDS 200N30 - Front
EM Test VDS 200N30
Rent 30 Amp Voltage Drop Simulator

Description

The AMP 200N2 has been designed as a low-frequency signal source to generate sinusoidal signals used to simulate ripple noise and ground shift noise as required by a variety of standards in the avionics, military and automotive industry. The AMP 200N2 is controlled by the NetWave (for testing Electrical Vehicles, avionics, military and nautic standard requirements. e.g LV 123 and ISO 7637-4 Pulse C). The AutoWave is used for automotive testing such as e.g. Ford FMC1278. Additionally, the AMP 200N2 can be used to generate magnetic fields by means of a radiation loop or small Helmholtz coils as per various standards.

Specifications:
Signal Generator
Frequency range
DC, 10 Hz - 500 kHz (sinusoidal)
Output voltage
+/-10 V, Programmable for control internal or external amplifiers
Amplifier Output
Frequency Range
DC - 500 kHz
Signal power
1,000 W (nominal)
Output voltage
50 Vrms, 160 V(p-p), max. 100 kHz 30 Vrms, 100 kHz - 500 kHz
Output current
Low range:
25 V, Vpmax. 17 V, Vrms max. 18 A, Arms max.
Mid range:
55 V, Vpmax. 37 V, Vrms max. 14 A, Arms max.
High range:
80 V, Vpmax. 55 V, Vrms max. 10 A, Arms max.
DC current
25 A, (H-field)
Output Impedance
30 mOhm @ 1 kHz
Total Harmonic Distortion (THD)
< 0.1 % Load (< 4 ohm, < 100 kHz)
Protection
- Short circuit
- Overtemperature
Dimensions
19", 6 HU (500 mm x 449 mm x 286 mm)
Weight
Approx. 40 kg
Supply voltage
115 V +10/-02 %, 50/60 Hz or 230 V +10/-15 %, 50/60 Hz
Input power
Max. 1,900 VA
Documentation