Com-Power AL-130R
Description
The Model AL-130R is compliant with CISPR 16-1-4. It is ideal for emissions measurements as required by various EMC standards such as FCC 18, CISPR 11, CISPR 13, CISPR 14, CISPR 32 and many more. The built-in, low-noise preamplifier, increases overall measurement sensitivity as well as the overall signal to noise ratio. As per ANSI C63.4-2014, the use of active loop antenna for compliance testing is permitted in a non-sheilded environment ONLY if the saturation indicator is continuously monitored during the course of testing.
The AL-130R is an Active Loop Antenna (loop size: 19” x 19” [0.5 m x 0.5 m] with electrostatic shield), operating over the frequency range of 9 kHz to 30 MHz. It has a built-in, low-noise preamplifier, which increases overall measurement sensitivity as well as the overall signal to noise ratio. The antenna is battery powered (rechargeable 6V NimH battery pack). The AL-130R can also be powered by the supplied charger/power adapter. The front panel has LED indicators for RF ON/OFF, power, battery low, amplifier saturation, as well as charging status.
- Specifications:
- Frequency Range
- 9 kHz to 30 MHz
- Loop Size
- 19 x 19 Inches (0.5 m x 0.5 m)
- Nominal Impedance
- 50 ohms nominal
- AC Adapter Output Power
- 6 VDC (unregulated), 500 mA
- Battery Type
- 6 VDC NimH (rechargeable)
- Average Battery Life
- 10-12 hours
- E-Field Antenna Factors
- 13.4 to 16.4 (average: 14.9) [dB(m-1)]
- Saturation Level
- >1 V/m / >120 dB?V/m (>2.65 mA/m) / >68.5 dB?A/m)
- Antenna Factor Variation
- 1.5 dB +/-
- Sensitivity (typical)
- -3 dBuA/m @ 10 kHz & -44 dBuA/m @ 1 MHz
- RF Connector
- BNC-type (female)
- Dimensions (H x W x D)
- 20.1 x 19.7 x 10.6 Inches [51 x 50 x 27 cm]
info@transientspecialists.com