Com-Power ISN/CDN-T8SE - Rent ISN for Shielded RJ45 Ports

Availability:
In Stock - Order By 3PM Ships Today!

Com-Power ISN & CDN for Shielded RJ45:

  • Utilized for both Immunity & Emissions Tests
  • CISPR 16-1-2, CISPR 22/32 Compliant
  • Designed for up to Four Balanced Pairs
  • Includes Calibration & 50Ω to 150Ω Adapters
  • Current ISO 17025 Calibration Including Data

Get weekly, two week, and monthly rentals on all products

Got Questions about the equipment? Get technical support

Two FREE days transit time with every rental

Request A Quote

Associated Emissions Rental Equipment

Description

Overview

The CDN-T8SE is used during conducted emissions or immunity tests on devices with signal/telecom ports intended for connection to shielded (or screened) lines with up to four balanced pairs. The EUT and AE ports of the CDN-T8SE are equipped with shielded RJ45 receptacles. The RF input/output port is located on the top side of the network, and is fi tted with a female BNCtype connector.

The outer surface of the network’s metallic enclosure is powder coated for durability, and is mounted onto an untreated (conductive), stainless steel base plate. The base plate extends beyond the footprint of the network enclosure at the front and back, providing convenient access to eff ectively ground the network, which is essential.

Any individual Com-Power CDN may be purchased separately, or as part of a CIS series conducted immunity test system. Test systems also include an ACS series power amplifi er, as well as the required accessories.

Data SheetUser Manual

Specifications

Common Standards

IEC-61000-4-6, CISPR 16-1-2, CISPR 22

Line parameters:

4 pairs, balanced, shielded, 100 Ω impedance

Frequency Range

 150 kHz to 30 MHz (as ISN)

150 kHz to 230 MHz (as CDN)

Max Input Voltage

40 Vrms

Application

Screened lines w/up to 4 balanced pairs

Current rating

1.5 Amps (max)

Voltage rating

125 VAC (line to GND)

RF Input Connector

 

50 Ω BNC (female)

EUT/AE Port Connections

 

Shielded RJ45

Common mode impedance

150 kHz to 30 MHz: 150Ω ±20Ω

30 MHz to 80 MHz: 150Ω +60Ω / –45Ω

80 MHz to 230 MHz: 50Ω ±60Ω

Voltage Division Factor

150 kHz to 30 MHz: 10 dB ±1 dB 

30 MHz to 230 MHz: 10 dB +2 dB / -1 dB

Decoupling Attenuation (Isolation)

 

150 kHz to 5 MHz: >70 dB

5 MHz to 30 MHz: >60 dB

30 MHz to 80 MHz: >50 dB

80 MHz to 230 MHz:  >40 dB

Dimensions

 

8.5” x 4.5” x 3.5” (21.5 x 11.4 x 8.8 cm)

You may also like

Recently viewed