Solar 2854-1

Rent MIL-STD-461 CS106 Spike Generator
In Stock - Order by 3 p.m. ships today
  • 10 Volt - 400 Volt Output Levels into 5 Ohms
  • MIL-STD-461 CS106 Compliant Generator
  • Compliant to MIL-STD-461 CS116
  • Current ISO 17025 Accredited Calibration
Got Questions? Speak to an Expert +1 630-887-0329
Two FREE days transit with every rental

Description

The Solar Model 2854-1 Transient Generator is designed for screen room use in making conducted transient susceptibility tests as specified in MIL-STD-461F, Test Method CS106.

The Model 2854-1 provides 5 μS ±22% pulse with a 1.5 μS ± 0.5 μS rise time across a 5.0 Ω non-inductive resistor. Voltage is adjustable to greater than 400 V. The undershoot is limited to less than 120 V peak (maximum) and less than 20 μS. The repetition rate is variable and can be adjusted from 0.8 pulse per second to 10 pulse per second. Single transients can be applied with the pushbutton on the front panel.

Two sets of output terminals allow either parallel or series injection into the power line. The series injection may be used on DC and AC lines. Parallel injection should be used on DC lines only. The output winding used for series injection can carry 25 A of power current. The output terminals are isolated from the chassis and the power cord.

Specifications:
Spike amplitude:
Continuously adjustable from 10 V to over 400 V peak
Repetition rate:
Continuously adjustable from 0.8 to 10 pulse per second
Rise time:
1.5 +/- 0.5 uS into 5 Ohms
Spike duration:
Output falls to zero in 5 uS +/- 22%
Spike shape:
Ringing characteristic as shown in Figure CS106-1 in MIL-STD-461F
Phase adjustment:
Pulse position adjustable from 0 to 360 degrees periodically on 50, 60 or 400 Hz sine wave
Internal impedance:
Less than 2.0 Ohms
Power requirements:
115 V 60 Hz, 1.6 A (230 V, 50 Hz, 0.8 A available)
Dimensions, standard rack panel:
19" wide x 7" high x 12.75" deep (48.26 cm x 17.78 cm x 32.38 cm)