Combination Wave/Surge Test Equipment Rentals
Combination Wave/Surge Test Equipment Rentals
Surge/combination wave generators provide the necessary waveform to simulate over-voltages from switching and lightning transients. There are many standards fall under the category of surge testing for immunity, the most most common include EN/IEC 61000-4-5 and ANSI  C62.41. EN IEC 61000-4-5:2014 defines surge as "transient wave of electrical current, voltage or power propagating along a line or a circuit and characterized by a rapid increase followed by a slower decrease ...applies to voltage, current and power". Many of the EMC Immunity surge generators provide the necessary capabilities to test to these standards and provide ability to modify testing criteria. Below you will find the surge/combination waveform required by EN IEC 61000-4-5 provided by the NSG 3060 generator. Combination Wave / Surge waveform
We offer combination wave/surge test equipment that meet a variety of EMC Immunity standards including IEC and ANSI series of standards and many others. Our Immunity test equipment rentals come with A2LA calibration & free technical support. We offer a variety of surge capabilities for both 6kV and 4kV testing allowing for the most cost efficient testing solutions. We also carry a diverse set of products including equipment from Teseq, EM Test, Haefely, and EMC Partner, and many others. We offer many commonly used surge/ combination wave test equipment products including the NSG 3060, Axos 8, and the NX5. We also offer additional surge testing capabilities with our 15kV & 10kV Surge Generators. This large product base allows us to meet any testing needs or preferences, and with over 30 years experience we are the solution to EMI testing rentals.

Combination Wave / Surge Generator Rentals Products

Combination Wave/Surge Generator Rentals - EMC Test Equipment Rentals

Showing 1 to 9 of 31 products

RENTAL

NSG 3150 Rental - Teseq 15kV Combination Wave/Surge Generator

The NSG 3150 by Teseq is an EMC immunity tester for combination wave/surge to 15kV, and offers solutions for both CE mark & ANSI testing. This product includes the CDN 3153 (three phase coupler). A2LA accredited calibration is included in the EMC test equipment price. 

This Surge Immunity Test Generator comes with the standard an easy to use Teseq interface that includes a 7" color screen and thumb wheel for adjustments. This test sytem offers flexible repetition time setting for significant reduction in test times. The 15kV surge generator also provides quick launch testing from an extensive Standards Library or User Test folders.

This compact EMC surge immunity test set is the perfect solution for outdoor applications. The NSG3150 15kV capabilities surpasses many testing requirements and can be controlled via laptop or through color display. This combination wave generator is ideal for testing to EN/IEC 61000-4-5, ANSI C62.41C62.45, and UL 1449. The NSG 3150 and CDN3153 system is compliant with the latest version of EN/IEC 61000-4-5.  

RENTAL

Axos8 Rental - 7kV Surge, Ringwave, 5kV EFT & Coupler Pulse Generator

The Haefely Hipotronics Axos8 EMI surge generator to 7 kV Ringwave and Surge generator with 5kV EFT (optional Dips and Interrupts) and a built-in single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. This expandable Haefely product provides safe and reliable operation by using safety interlock, warning lamp and emergency stop functions helping to ensure safe use.

This Immunity Test Generator expandable functionality allows for quick and completely automated testing to the most common IEC, EN, ANSI, IEEE and UL standards. This test equipment is user friendly with manual and automated test mode and software assisted test preparation. It provides a touch screen for  efficient and effective manipulation of testing criteria to meet or a diverse set of testing needs.

This pulse generator allows for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12 and optional external box for testing per EN/IEC 61000-4-11 and EN IEC 61000-4-29. The Axos unit can either be operated via front panel by large colour graphic interface or remotely from the PC. This product has the ability to change testing parameters while conducting tests and is useful for monitoring and debugging function during design phase as well as compliance and pre-compliance testing.

RENTAL

A NSG 3060 Rental - Teseq 6.6kV Surge, Ringwave, & 4.8kV EFT Generator

The Teseq (previously Schaffner) NSG 3060 EMC Immunity generator provides testing for EFT(electrical fast transients) to 4.8kV, Surge to 6.6kV, 100kHz ring wave to 6.6kV and offers solutions for both CE mark, ANSI, and IEC testing.  A2LA accredited calibration is included in the EMC rental equipment price. It includes both coupling methods associated with IEC and ANSI EMC testing standards. We also offer a variety of accessories available for rent, including the CDN 3083 series (CDN3083-S100 & CDN3083-B100), allowing for enhanced testing capabilities. 

This multifunction generator offers a user-friendly design to help streamline testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN 61000-4-12, ANSI C62.41, C62.45, and UL 1449. It offers a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This system is often rented with the CDN 3061 (coupling decoupling network) allowing for single phase coupling up to 270V/16A.

This Immunity Test Generator has a Ethernet port for connect with a PC and includes window based software. This simplifies electromagnetic compatibility testing allowing for compilation of complex test sequences with diverse pulse types. The software with the NSG3060 test set enables the user to create reports and enter observations as the test progresses increasing the efficiency of long-term tests.

RENTAL

Axos 5 Rental - Haefely Hipotronics 5kV Surge & EFT Generator

The Haefely Axos 5 EMI test generator for 5kV Surge and EFT with a built-in single phase coupling/decoupling network. A2LA accredited calibration is included in the EMC rental equipment price. This compact Haefely product provides safe and reliable operation by using safety interlock, warning lamp and emergency stop functions helping to ensure safe use.

This Immunity Test Generator is designed for EFT / Burst, Surge, Magnetic Field and AC & DC Dips and Interrupts allowing for a diverse range of applications. This pulse generator is easy to operate with manual and automated test mode and software assisted test preparation. The touch screen provides efficient and effective manipulation of testing criteria to meet or a diverse set of testing needs.

The Axos 5 expandable functionality allows for quick and completely automated testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5 and EN/IEC 61000-4-11 and CE Marking. The unit also includes an integrated single-phase coupling decoupling network (CDN) for EMC testing applications up to 16A. The AXOS unit can either be operated via front panel by large color graphic interface or remotely from the PC for added flexibility. 

RENTAL

NSG 3040 Rental - EFT 4.4kV, Surge 4.8kV Built-In Coupler

The Teseq NSG 3040 electromagnetic immunity (EMI) test generator provides 4.4kV Surge and 4.4kV electrical fast transient (EFT) with a built-in single phase coupler and is designed primarily for cable-borne transient interference tests. A2LA accredited calibration is included in the EMC rental equipment price. This Teseq products modular architecture and industry standard interfaces allow it to be easily expanded and customized to meet individual testing needs.

This Immunity Test Generator is designed to fulfill conducted EMC testing requirements for CE mark testing, including Combination Wave Surge (4.4 kV), Electrical Fast Transient (EFT) pulses (4.8 kV) and Power Quality Testing (PQT). The NSG3040 includes a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This EMC test equipment can also be controlled via PC through the Ethernet Port.

This Teseq (previously known as Schaffner) surge/immunity generator is an all in one box that tests to EN/IEC 61000-4-4, EN/IEC 61000-4-5 and EN/IEC 61000-4-11 and CE Mark with optional INA 6502. Expansion capabilities enable the system to be configured for a much broader range of applications including Telecom Surge 10/700 and Magnetic Field tests. This pulse generator, similar to the NSG 3060, provides the same easy to use interface and connection methods.

RENTAL

CDN3083-S100 Rental - Teseq 100A/620V 3phase CDN for Surge & Ringwave

The Teseq CDN 3083-S100 is an external, manual, three phase, 620v, 100a coupler/decoupler for the combination wave/surge and 100kHz ringwave generated by the NSG3060 and NSG 3040. This Teseq Product enables coupling modes with all types of symmetrical and asymmetrical coupling given in the EN/IEC 61000-4-5 and ANSI C62.41 2002.

This coupling decoupling network comes assembled and on wheels, providing an easily maneuverable turnkey solution. An A2LA accredited calibration is included in the price of this test equipment. It is often used in conjunction with the CDN3083-B100 providing 100Amp coupling/decoupling for Burst/EFT (electrical fast transients). These products are ideal for applications that require high AC and DC voltages and currents.

The CDN30830-S100 has all components, surge decoupling networks, INA 3080s, INA 3084 and earth rails installed. This testing accessory also comes with several cables allowing for required connections to be made easily. It can be rented individually to supplement existing testing capabilities, must be used with NSG 3060 or NSG 3040, or in combination with either Teseq surge generator.

RENTAL

IMU 4000 Rental - EMC Partner 4kV Generator EFT, Surge, & Dips (Optional IEC 61000-4-16)

The EMC Partner IMU4000 EMI (Optional: Common Mode) test generator is an all in one unit testing solution for testing to EFT to 4.4kV and Surge to 4.1kV with built-in single phase coupler, and Dips under 6 amps. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. The IMU 4000 includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions.This EMC tester is a environmentally conscience solution with low power consumption, less noise, and less heat. 

The IMU4000 is a single unit testing system for EN/IEC 61000-4-4, EN/IEC 61000-4-5EN/IEC 61000-4-11and CE Mark. With the common mode available for testing to EN/IEC 61000-4-16 this design offers flexibility depending on testing needs. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.

RENTAL

A NSG3060 CDN3063 Rental - Teseq EFT(4.8kV) Surge and Ringwave(6.6kV), Includes 3 Phase Coupler

The Teseq CDN 3063 EMC Immunity Tester with the NSG 3060 for EFT to 4.8kV, Surge to 6.6kV, 100 kHz Ringwave to 6.6kV.  It Includes, three phase EFT and Surge coupler with 480V, 32A EUT capability. This is the combination of both the CDN 3063 and NSG 3060 which are priced and often rented desperately. This product is designed primarily for cable-borne transient interference tests.

This Immunity Testing System was created for maximum reliability in a wide range of test setups. Over temperature protection, which allows short term operation at currents exceeding the nominal rating, prevents damage to internal components. The combination of both the NSG 3060 and CDN 3063 takes into account EUT power voltage levels allowing for testing to ANSI C62.41 and many others.

RENTAL

NX5 Rental - EM Test 5kV Surge & EFT Generator 32A. Coupler

The EM Test NX 5 EMI test generator to 5.5kV EFT and 5kV surge with a built-in 32A single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. It is the most versatile tester to address transient and power fail requirements for both international and commercial standards. 

This Immunity Test Generator includes an easy-to-use color touch screen allow for efficiently changing of testing parameters. It can be operated manually from the intuitive front touch screen or remotely via its built-in Ethernet, USB or optical interface. The NX5 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing.

This NX 5 includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11 and CE Mark.  Its internal single-phase Coupling/Decoupling Network (CDN) can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 A per phase.

Showing 1 to 9 of 31 products