Showing 17 - 29 of 29 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
Haefely AXOS 8 Front Side Haefely AXOS 8 Front
Haefely AXOS 8 - Rent 7 kV Transient Test Generator
  • 7 kV Surge, 5.5 kV EFT, & 7 kV 100 kHz Ringwave
  • Built-in CDN Max 264 V/16 A AC or 220 V/10 A DC
  • Compliant to ANSI Coupling Requirements 
In Stock
EMC Partner IMU4000 - Front Side EMC Partner IMU4000 - Front
EMC Partner IMU4000 - Rent 4kV EFT, Surge, & Dips System
  • 4 kV Surge & 4.4 kV EFT/Burst Capabilities
  • CDN Max 280 V/16 A AC or 300 V/16 A DC
  • Capabilities for Voltage Dips up to 6 Amps
EM Test NX5 Front Side EM Test NX5 Front
EM Test NX5 bsp-1-300-32 - Rent Transient System 32 Amp CDN
  • Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
  • Built-in single phase CDN Max 300 V/32 A AC or DC
  • Laptop with iec.control software included
EM Test NX5 bsp-1-300-16 Front Side EM Test NX5 bsp-1-300-16 Front
EM Test NX5 bsp-1-300-16 - Rent 5 kV Surge & EFT Generator
  • Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
  • Built-in single phase CDN Max 300 V/16 A AC or DC
  • Laptop with iec.control software included
Monthly Rental-$1,550
In Stock
EM Test Compact NX7 Front Side EM Test Compact NX7 Front
EM Test Compact NX7 - Rent 7 kV Compact Transient Generator
  • 7 kV Surge, 5.5 kV EFT, & 7 kV 100 kHz Ringwave
  • Built-in single phase CDN Max 300 V/16 A AC or DC
  • Laptop with iec.control software included
In Stock
EM Test Coupling NX7 bsr-3-480-32 - Front Side EM Test Coupling NX7 bsr-3-480-32 - Front
EM Test Coupling NX7 bsr-3-480-32 - Rent 3-Phase 32Amp CDN
  • Coupler for Surge, EFT, & Ringwave Pulses
  • Max 480 Volts 32 Amps AC
  • Automatic Coupler for NX5/NX7 Systems
Teseq NSG 3060A Front Side Teseq NSG 3060A Front
Teseq NSG 3060A - Teseq Transient Generator Test System
  • Configured for 6.6 kV Surge & 5.5 kV EFT/Burst
  • Built-in single phase CDN Max 300 V/16 A AC or DC
  • Model: NSG 3060A-IEC (IEC 61000-4-4/5)
In Stock
EM Test NX5 Front Side EM Test NX5 Front
EM Test NX5 bsp-1-400-16 - Rent Transient Generator 400V CDN
  • Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
  • Built-in single phase CDN Max 400 V/16 A AC or DC
  • Laptop with iec.control software included
EMC Partner IMU-MGS - Front Side EMC Partner IMU-MGS - Front
EMC Partner IMU-MGS - Rent 4 kV Surge & EFT Generator
  • 4.1 kV Surge & 4.4 kV EFT/Burst Generator 
  • Built-in CDN Max 300 Volts 16 Amps AC & DC
  • Model: IMU-MGS F4-S4-P
In Stock
EMC Partner CN-EFT100 - Front Side EMC Partner CN-EFT100 - Side Above
EMC Partner CN-EFT1000 - Rental Capacitive Coupling Clamp
  • IEC 61000-4-4 & IEC 61000-4-18 Compliant
  • Designed for Coupling to I/O Lines  
  • Useable for Damped Oscillatory Wave Testing
In Stock
Rent Haefely IP4B - Front Side Rent Haefely IP4B - Front Top
Rent Haefely IP4B Capacitive Coupling Clamp
  • Construction as per IEC 61000-4-4 Ed.3
  • EFT/Burst testing of signal and data lines
  • For cable diameter from 4 – 40 mm
In Stock
Teseq CDN 3425 Front Side Teseq CDN 3425 Side Top
Teseq CDN 3425 - Capacitive Coupling Clamp Rental
  • Complies with IEC 61000-4-4 Ed 2 & 3
  • Maximum Burst Voltage 8 kV
  • Used for Test EFT/Burst on Data Lines
In Stock
EM Test CCI - Front Side EM Test CCI - Side
EM Test CCI - Rent Capacitive Clamp EFT/Burst Testing
  • Construction as per IEC 61000-4-4 Ed.3
  • EFT/Burst Testing of Signal- and Datalines
  • Permissible Burst Voltage 7 kV
In Stock