Showing 1 - 16 of 29 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
EM Test NX7 bsprt-1-400-32 - Front Side EM Test NX7 bsprt-1-400-32 - Front
EM Test NX7 bsprt-1-400-32 - Rent Telecom Transient Generator
  • 7 kV Surge, Ringwave, Telecom Surge, & 5.5 kV EFT
  • Built-in single phase CDN Max 400 V/32 A AC or DC
  • 400 Volt Model: bsprt-1-400-32
In Stock
ECAT E508 - Front ECAT E508 - Side
Thermo Keytek ECAT E508 - Rent 10 x 360 µs Telecom Surge Module
  • 10x360µs Waveform Generator
  • Provides 50 Volts to 1100 Volt Levels
  • Test Solution GR-1089-CORE
Buy Used-$5,000
In Stock
Thermo Fisher Scientific Keytek ECAT E506-4W Module Front Thermo Fisher Scientific Keytek ECAT E506-4W Module Side
Thermo Keytek ECAT E506-4W - Rent Bellcore 2x10 µs Surge Module
  • 2 x 10 µs Waveform Generator
  • Provides up to 5kV 500 Amps
  • Must be used with E103 Control Unit
$4,000
In Stock
Thermo Keytek E509 10x1000 telecom surge module for the ECAT system
Keytek ECAT E509A - Bellcore GR-1089-CORE 10/1000us Network
  • 1.5kV 10/1000us Pulse Generator Module
  • Compliant Test Solution GR-1089-CORE
Buy Used-$6,000
In Stock
ThermoScientific EMCPro Plus - Front Side ThermoScientific EMCPro Plus - Front
ThermoScientific EMCPro Plus - Rent 6 kV Transient Test System
  • 6 kV Surge, 4.4 kV EFT, & 6 kV 100 kHz Ringwave
  • Built-in CDN Max 250 V/16 A AC or 100 V/10 A DC
  • Capabilities for Voltage Dips Testing
EM Test UCS 500N5E Front Side EM Test UCS 500N5E Front
EM Test UCS 500N5E - Rent 5.5 kV EFT/Burst Generator
  • Configured for 5.5 kV EFT/Burst Immunity Testing
  • Built-in CDN Max 300 V/16 A AC
  • Rent Capacitive Clamp for Data Line Testing
In Stock
Pearson 110 - Front Pearson 110 - Rent Current Monitoring Probe 65 Amp RMS
Pearson 110 - Rent Current Monitoring Probe 65 Amp RMS
  • Maximum RMS Current 65 Amps
  • Usable Rise time 20 Nanoseconds
  • Sensitivity 0.1 Volt/Ampere +1/-0%
Monthly Rental-$150
In Stock
Cal Test CT3681 with Cables Cal Test CT3681 Front
Cal Test CT3681 - Rent 7 kV Differential Probe
  • Up to ±7 kV Differential & Common Mode
  • 70 MHz Bandwidth (-3 dB)
  • Selectable Attenuation 100x/1000x
In Stock
ECAT E411 Thermo Fisher / Keytek Front ECAT E411 Thermo Fisher / Keytek Side with glass cover
Thermo Keytek ECAT E411 - Buy & Rent 4.4 kV EFT/Burst Module
  • 4.4 kV EFT/Burst Generator Module
  • Designed for IEC 61000-4-4 Testing
  • Must be used with E103 Control Unit
Buy Used-$4,000
In Stock
Thermo Keytek PK1001D - Top Thermo Keytek PK1001D - Side
Thermo Keytek PK1001D - Rent 6 kV High Voltage Probe
  • Low EMI Sensitivity
  • 200:1 Attenuation
  • Can be used with Most Oscilloscopes
In Stock
Thermo Keytek CCL Front Side Thermo Keytek CCL Side
Thermo Keytek CCL - Capacitive Coupling Clamp Rental
  • Designed for EFT Testing Data I/O Lines
  • Includes Plastic Safety Cover
  • Used with the EMC Pro Plus Generator
Teseq NSG 3040 - Rent 4.4 kV Surge 4.8 kV EFT Generator Teseq NSG 3040 - Rent 4.4 kV Surge 4.8 kV EFT Generator
Teseq NSG 3040 - Rent 4.4 kV Surge 4.8 kV EFT Generator
  • 4.4 kV Surge & 4.8 EFT Immunity Test System
  • Built-in single phase CDN Max 260 V/16 A AC or DC
  • Model/Version: NSG 3040-IEC
In Stock
Teseq CDN 3063 - Front Side Teseq CDN 3063 - Rent 3-Phase 480 Volt 32 Amp CDN
Teseq CDN 3063 - Rent 3-Phase 480 Volt 32 Amp CDN
  • Coupler for Surge, EFT, & Ringwave Pulses
  • Maximum 480 Volts 32 Amps AC/DC
  • Automatic Coupler for NSG 3060/NSG 3040
Buy Used-$11,000
In Stock
Teseq CDN 3083-B100 - Front Side Teseq CDN 3083-B100 - Side Top
Teseq CDN 3083-B100 - Rent 100 Amp 3-Phase Burst CDN
  • Designed for Burst to IEC 61000-4-4
  • Max 100 Amps 690 V AC or 1,000 V DC
  • Handles up to 8.8 kV EFT/Burst Pulses
In Stock
Teseq NSG 3060 Front Side Teseq NSG 3060 Front
Teseq NSG 3060 - Teseq 6.6 kV Transient Test System
  • 6.6 kV Surge, 4.8 kV EFT, & 6.6 kV 100 kHz Ringwave
  • External Single Phase CDN Max 270 V/16 A AC or DC
  • Laptop with WIN 3000 Software Included
Buy Used-$21,000
In Stock
Haefely AXOS5 - Front Side Haefely AXOS5 - Front
Haefely AXOS5 - Rent 5 kV Surge & EFT Generator
  • 5 kV Surge & EFT Immunity Test System
  • Built-in CDN Max 264 V/16 A AC or 220 V/10 A DC
  • Capabilities for Voltage Dips Testing with DIP 116
Monthly Rental-$1,400
In Stock