Effective EMC Immunity Test Equipment Solutions
Effective EMC Immunity Test Equipment Solutions
Immunity is the impact that electromagnetic energy has on the function of an electronic device. The International Electronical Commission (IEC) Electromagnetic Compatibility (EMC) testing standards are most comprehensive and widely used for EMC testing. These standards all fall under the basic publication of IEC 61000, which is general guidelines for EMC. The phenomena which these sets of standards are based off of include Combination Wave/Surge, Ring Wave, Burst/Electronic Fast Transients (EFT), and Dips and many others. We offer immunity test equipment from many major suppliers including, Teseq, EM Test, EMC Partner, and Thermo-Keytek.

EN / IEC Series
  • EN IEC 61000-4-4 Burst / Electronic Fast Transient (EFT)
  • EN IEC 61000-4-5 - Combination Wave / Surge 
  • EN IEC 61000-4-11 - Dips
  • EN IEC 61000-4-12 - Ring Wave

ANSI / IEEE Series

  • ANSI IEEE C62.41 - Surge
Surge, EFT, ringwave, & dips generators focuse on replicating phenomena caused by electromagnetic energy and analyzing the EUT for a respone. The focus of Surge, Ringwave, EFT, and Dips for this category is based on commercial standards. We also carry a large inventory of EMI test equipment rentals for many applications including Military/Avionics, Automotive, and Electrostatic Discharge (ESD). To facilitate testing we also carry a diverse group of accessories including 3 phase couplers and coupling clamps allowing us to provide additional testing solutions. The equipment we rent often has reprogrammed standards allowing for testing to be completed efficiently. All our of EMC Immunity test equipment comes with an A2LA accredited.

Common Immunity Rental Products

Surge, EFT, Ring wave, & Dips Generator Rentals - EMI Immunity

Showing 19 to 27 of 42 products


CDN3063 Rental - Teseq 32A/480V 3Phase CDN Surge, Ringwave, & EFT

The Teseq CDN 3063 coupling decoupling network allows for 32Amp 480Volt three phase, EFT, Surge, and 100kHz ringwave for use with the NSG 3040 and NSG 3060. This testing accessory can be rented individually or together as an NSG3060 CDN3063 combination. This accessory is designed for maximum reliability in a wide range of test setups. 

This immunity test equipment includes both IEC and ANSI coupling methods. It also includes a Phase Rotation indicator ensuring correctly sequenced power connection, preventing damage to equipment under test (EUT). An A2LA accredited calibration is included in the EMC test equipment price.

The CDN3063 allows for coupling for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12, ANSI C62.41, ANSI C62.45, and UL 1449. Through new technology it offers the ANSI C62.41 coupling method, used to measure and track the mains voltage and simultaneously control the pulse phase angle. We also offer rentals of higher current and voltage networks including the CDN3083-S100 and CDN3083-B100. 


EOS1 Rental - Electronic Switch For EN IEC 61000-4-11 with the Profline Test System

The EOS 1 by California Instruments is an electronic output switch provides full AC source compliance for dips and Interrupts testings. There are many ways to test a product to verify immunity from line variations, and some form of standardization, for comparison purposes, is desirable. A2LA accredited calibration is included in the EMC rental equipment price. 

The standard, EN/IEC 61000-4-11, seeks to specify the parametric requirements of an AC source suitable for performing the specified tests. Generally, these requirements go beyond what is necessary on a particular product.


CDN HSS-2 Rental - Teseq Ethernet Surge Coupling / Decoupling Network for Unshilded Symmetrical High Speed Communication Lines

The Teseq CDN HSS-2 Coupling Decoupling Network is designed for convenient surge testing with 1.2/50 μs pulses, as defined in EN/IEC 61000-4-5, on unshielded symmetrical high speed telecommunication lines e.g. Ethernet. A2LA accredited calibration is included in the EMC rental equipment price. This product allows testing on ISDN and Ethernet with 10/100BaseT and 1000BaseT. With a surge test voltage of 2 kV is the maximal residual voltage at the AE port only 65 V due to the excellent decoupling network. Additional decoupling elements are not required to protect the auxiliary equipment (AE). 


CDN3083-B100 Rental - Teseq 100A/690V 3phase CDN for EFT/Burst

The CDN 3083-B100 is a manual, external three phase, 690V, 100A coupler/decoupler for the EFT/Burst generated by the NSG 3060, NSG 3040, or similar Teseq product. A2LA accredited calibration is included in the EMC testing accessory price. This product can has a maximum burst voltage of 8800 volts.

This ideal for industries and applications that require higher AC and DC voltages and currents, including power & telecom industry, renewable energy applications, electric vehicle and charging stations. Given that this accessories weighs roughly 11lbs, it allows placement of the coupling decoupling network to distances between it and EUT as required by the standard.

The CDN 3083 - B100 is designed for testing of electrical fast transients, specifically EN/IEC 61000-4-4. This testing accessory is often rented in conjunction with the CDN 3083-S100 for surge and ringwave. It is designed to be used with an EUT supply in AC mode up to 690V.


CDN3083-S100 Rental - Teseq 100A/620V 3phase CDN for Surge & Ringwave

The Teseq CDN 3083-S100 is an external, manual, three phase, 620v, 100a coupler/decoupler for the combination wave/surge and 100kHz ringwave generated by the NSG3060 and NSG 3040. This Teseq Product enables coupling modes with all types of symmetrical and asymmetrical coupling given in the EN/IEC 61000-4-5 and ANSI C62.41 2002.

This coupling decoupling network comes assembled and on wheels, providing an easily maneuverable turnkey solution. An A2LA accredited calibration is included in the price of this test equipment. It is often used in conjunction with the CDN3083-B100 providing 100Amp coupling/decoupling for Burst/EFT (electrical fast transients). These products are ideal for applications that require high AC and DC voltages and currents.

The CDN30830-S100 has all components, surge decoupling networks, INA 3080s, INA 3084 and earth rails installed. This testing accessory also comes with several cables allowing for required connections to be made easily. It can be rented individually to supplement existing testing capabilities, must be used with NSG 3060 or NSG 3040, or in combination with either Teseq surge generator.


INA 6502 Rental - Teseq External Transformer (EN/IEC 61000-4-11)

The Teseq INA6502 is an automated external transformer for the NSG 3040 and NSG 3060 test systems to perform dips and interrupts testing. A2LA accredited calibration is included in the EMC rental equipment price. This product allows for reducing the incoming supply voltage by pre-set amounts. 

This Immunity Test Accessory is designed for easy handling and can be used in three different positions; laying, standing, or wall-mounted. Several control parameters can be accessed through the front panel including power and voltage selector rotary. This EMC test equipment also includes 16 A fuse located in the front of the unit for added protection.

The INA6502 tests to EN/IEC 61000-4-11 and power quality testing (PQT) with the 80% voltage position and to the large overcurrent capabilities in the step transformer. It provides four voltage dips allowing for testing to many standards and company requirements. This product can be controlled using the touch screen interface or the WIN 3000 remote control software.


EFT CCL - Capacitive Coupling Clamp For EFT Testing Per IEC61000-4-4

This Capacitive coupling clamp by Thermo-Keytek is designed for EFT pulses on I/O lines per EN/IEC 61000-4-4


Thermo Keytek CM 3CD - SRG 3-Phase Surge Coupler/Decoupler For The EMC Pro Plus

The CM 3CDSrg from Thermo Keytek is a three phase external coupler for EN IEC 61000-4-5 surge tests for the EMC ProPlus.


Thermo Keytek CM- I/OCD - External I/O Signal Line and Telecom Surge Coupler/Decoupler

Thermo Keytek I/O and data line coupler for surges per EN IEC 61000-4-5.

Showing 19 to 27 of 42 products