MIG 2000-6 CS115 & CS116 - Front

EMC Partner MIG 2000-6 - Rent CS115 & CS116 Test System

Got Questions? Speak to an Expert +1 630-887-0329
Two FREE days transit with every rental

Overview

This setup with the MIG 2000-6 test system/impulse generator includes both Plug-Ins for MIL-STD-461 CS 115 & CS116 (MIG 2000-6 CS115 available) and provides a single unit solution to both conducted susceptibility test standards.The rental of this equipment includes associated cords, software, and an ISO 17025 accredited calibration. This EMC Partner Immunity test product also comes with CN-MIG-BT and CN-MIG-BT2 injection probes. The waveform are guaranteed together with the injection probe (coupler) as specified in the MIL-STD-461E.

This Military & Avionics EMC Test Equipment provides three plug-ins, one plug-in for CS115 (2x30 nanoseconds) and two for CS116 (10khz/100khz/1Mhz & 10Mhz/30Mhz/100Mhz. These plug-ins slide into the structure of the body of this unit allowing for easy interchange of testing parameters. The MIG 2000-6 is designed to meet the testing criteria for MIL-STD-461 CS115, MIL-STD-461 CS116, and RTCA DO-160 sec 22. This product is an all in one solution for Mil Std 461 CS115 & CS116 rather than individual test solutions that are provided by competing products. 

Specifications

Common Standards

MIL-STD-461 CS115MIL-STD-461 CS 116, RTCA DO-160 sec 22

CS116-10K10M Plug-in

 

   10 kHz damped oscillatory

Current Range into 100 ohms  .02A - .2A

Frequency  10kHz

Damping -  4th peek 40 to 50%

Repetition rate -  2Hz Max.

   100 kHz damped oscillatory

                                                

Current Range into 100 ohms  .2A - 2A

Frequency  100kHz

Damping -  4th peek 40 to 50%

Repetition rate -  2Hz Max.


   1 MHz damped oscillatory

Current Range into 100 ohms  1A - 15A

Frequency  10kHz

Damping -  4th peek 40 to 50%

Repetition rate -  2Hz Max.

   10 MHz damped oscillatory

Current Range into 100 ohms  2A - 12A

Frequency  10kHz

Damping -  4th peek 40 to 50%

Repetition rate -  2Hz Max.

CS116-30M100M Plug-in

 

   30 MHz damped oscillatory

Current Range into 100 ohms  2A - 12A

Frequency  10kHz

Damping -  4th peek 40 to 50%

Repetition rate -  2Hz Max.

   100 MHz damped oscillatory

Current Range into 100 ohms  2A - 12A

Frequency  10kHz

Damping -  4th peek 40 to 50%

Repetition rate -  2Hz Max.

   30 MHz damped oscillatory

Current Range into 100 ohms  1A - 6A

Frequency  10kHz

Damping -  4th peek 40 to 50%

Repetition rate -  2Hz Max.

CS115 REC Plug-in

 

Current Range into 100 ohms 

1A up to 10A

Rise Time

<2ns

Fall Time

<2ns

Duration

30ns

Repetition Rate

30 Hz Maximum

Weight

25kg, 55 pounds

Dimensions

43.5cm X 33.0cm X 22.2cm (17.25” X 13” X8.75”)

 

Packing List

Included with Rental of the MIG 2000-6

Below you will find a list of common accessories that you can expect to be delivered with the equipment. This is a generic standard list and should you require an exact connector or accessory please contact us prior to order shipping. We are also excited to offer many different testing accessories not standard with the immunity/susceptibility generator. A detailed list of these can be found on the "All Accessories" tab. 

 

MIG 2000-6

    • Printed Manual
    • Calibration Documentation
    • Manual on a USB drive
    • Back Keeper-MIG
    • Power Cord
    • CS116-10K10M Plug in Module 
    • 20db Attenuator 
    • CS116-30M100M Plug in Module 
    • CS115 REC Plug in Module 
    • BNC Cord (Qty 2)
    • SHV to SHV cord
    • CN-MIG-BT Injection Probe
    • CN-MIG-BT2 Injection Probe
    • U shaped jumper for CN-MIG-BT2
    • Veri-Mil2 calibration fixture
    • Veri50 191 Attenuator
    • Veri50 192 Attenuator
    • Terminating 50 Ohm Load
    • Pearson 8585C current monitor
    • Pelican Shipping Cases (qty 2)
Plug-Ins/Options

The EMC Parnter MIG (Modular-Impulse-Generator) 2000-6 is designed to offer many susceptibility test solutions through the plug-in system. This is as simple as removing one network and sliding in the next. Below you will find a complete list Plug-Ins and associated table with related standards. 

 

  • CS106 
  • CS115REC
  • CS116-10K10M
  • CS11630M100M
  • NATO-SLOW 10u
  • NATO-FAST-150n
  • Fx-DO-160-S17
  • Fx-DO-160-S19
  • Fx-MIL1275
  • Fx-AMD24C
  • CN-MIG-BT
  • CN-MIG-BT2
  • CN-MIG-BT4
  • SYNCH-ADAPTER
  • VERI-MIL2
  • VERI-50
  • VERI5
  • DC S17 CL

Overview of MIG 2000-6 Test System

All Accessories

MIG 2000-6 Full Accessory List

 

Item Capabilities
CN-MIG-BT Cable Induction Tests - Injection probe (coupler) frequency range 10 kHz up to 10 MHz. Maximum cable diameter 30 mm (approx. 1.2“) 
CN-MIG-BT2

Cable Induction Tests - Injection probe (coupler) frequency range 10 MHz up to 100 MHz. Maximum cable diameter 26 mm (1“)

VERI-MIL2

Calibration fixture for waveform calibration 10 kHz up to 100 MHz

CN-MIG-BT4 AMD-24C Tests

VERI50

50 ohm termination and attenuator for system verification according to MIL-STD-461E.

VERI5

5 ohm termination and attenuator for system verification

SYNCH ADAPTER

The Sync Adapter generates the signal for the Spike synchronisation. It must be connected to the „Auxiliary“ plug on the rear panel of the MIG2000-6 generator.

DC-S17CL

10uF decoupling set for voltage spike on power supplies.

  

Video

MIG 2000-6 - Overview & Setup

Description: This video provides an overview of the MIG2000-6 military conducted susceptibility generator. It provides a quick overview of the test system, connections, and capabilities. It then walks through the software and changing different parameters. This test system, including the software, is available for rent and comes with and ISO 17025 accredited calibration. 

 

Testimonials

I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

Scott D., TUV SUD Canada

 

Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

John H., Gates Air, Inc.

 

Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

Adam P., Clark Testing

 

Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

Richard T., National Technical Systems