IEC 61000-6-1 Rentals - Residential & Commercial Immunity Generators

The CBA 1G-600B has the capacity to produce a 600W 80MHz to 1GHz and can be controlled via front panel or via latop with USB, GPIB, RS232 and Ethernet connections. It is compatible and can be easily integrated with a wide variety Teseq products and test systems. The minimum of 500W linear power makes it a  excellent solution for RF immunity testing for a variety of applications including military, automotive, and aerospace applications.

This EMC test equipment is often used for RF immunity testing to IEC 61000-4-3, MIL-STD 461, ISO 11452,  RTCA DO-160, and many others. We also carry the CBA 1G-300B, which provide 300W capabilities with the same frequency range. It is often included in test setups with associated Teseq products, including the NSG 4070 and ITS 6006. The touch screen front panel gives immediate fedback and provides information including operating status and heatsink temperature.

Our amplifiers provide turnkey solutions coming with required cords and accessories. The inbuilt fan speed automatically adjusts according to the heatsink temperature ensuring the minimum audio noise level. To supplement testing, we also rent many other amplifiers including S251-300 (800MHz-2.5Ghz 300w) and AS0860-50 (800Mhz-6Ghz 50W).

The AS0860 amplifier has the frequency range of 800MHz to 6GHz up to 50 watts and be controlled via front panel or with a laptop or computer. This test equipment can be easily integrated into Teseq, EM Test, and Milmega product setups. It is designed to ensures that the amplifier will continue to operate at full power even when presented with an open or short circuit at its output. The frequency ranges and power make it a great solution for Telecom, Instrumentation, and many other applications.

This EMC test equipment is powered from a high efficiency power supply with a high power factor and wide range of voltage operations.The unit is air-cooled with integral fans, is protected against faulty cooling by excess temperature sensing. A safety interlock connector is provided, which the user can short circuit to ground, to put the amplifier into standby mode. 

Our amplifiers provide turnkey solutions coming with required cords and accessories. The front panel display provides immediate results and allows for quick modification of testing parameters. It also provides operational status and heatsink temperature. To supplement testing requirements we also offer a variety of other antennas and amplifiers making Transient Specialists the go-to resource for rentals.

The Teseq CBA 1G-300B produces 80MHz to 1GHz 300W capabilities in a compact system with easy to use touch screen display. This amplifier provides a minimum of 250 watts of linear power lending itself to RF immunity testing to various industry standards including IEC 61000-4-3, MIL-STD 461, ISO 11452
and RTCA DO160. It can be controlled either through the front panel screen or via laptop through USB, GPIB, RS232 and Ethernet connections.

This EMC (electromagnetic comparability) test equipment allows for easy integration with preexisting testing systems. It is often included in test setups with associated Teseq products including the NSG 4070 and ITS 6006. Reverse and forward power as well as, diagnostic information can be seen immediate through the front panel screen. 

Our Amplifiers provide turnkey solutions coming with required cords and accessories. The inbuilt fan speed automatically adjusts according to the heatsink temperature ensuring the minimum audio noise level. To supplement testing, we also rent many other amplifiers including S251-300 (800MHz-2.5Ghz 300w) and AS0860-50 (800Mhz-6Ghz 50W).

The Teseq CBA 400M-110 can supply 110Watt into a 50 ohm load over the range of 10kHz-400Mhz. This mismatch tolerant and unconditionally stable Class A broadband amplifier is ideal for bulk current injection (BCI) EMC Testing including automotive, military, and aerospace applications. This test equipment is powered by a switch mode power supply, is air cooled with integral fans, and protected against faulty cooling via temperature sensing.

This equipment provides testing to a wide variety of EMC immunity testing. It provides indicator lights for radio frequency (RF) interlock operations and over-temperature. The unique construction of this test equipment will continue to work at full power when presented with an open or short circuit at its output. This easy to use test system allows for easy testing to EN/IEC 61000-4-6, CISPR 24, and many other standards.

All of our power supplies come with all required cords for use and provide a turnkey testing solution. We also carry a variety of other amplifiers including the CBA 1G-300 (80Mhz-1Ghz 300W) and TI88-250 (7.5Ghz-18Ghz 250W) to facilitate higher frequency and power testing needs. This product requires mains plug only be connected in a socket providing protective earth contact.

The NSG4070 by Teseq is a multifunctional device for carrying out EMC testing for conducted and radiated immunity. A2LA accredited calibration is included in the conducted RF generator rental price. The third generator provides efficient and effective means to create testing reports and connect EUT monitoring. This test system is ideal for bulk current injection (BCI) testing.

This Conducted RF Immunity Test Generator modular set-up using internal or external amplifiers enables a large variety of applications. The powerful and easy to use firmware from an external PC and control software, however it can also be remote controlled for system operation. A state-of-the-art data transfer of test and measurement data for documentation is provided by USB stick to be plugged into the front pane. 

The NSG 4070 was designed to testing in accordance to EN/IEC 61000-4-6, EN/IEC 60601-1-2, EN/IEC 61000-4-20, EN/IEC 61000-4-21 and several automotive standards. This immunity test product provides various sweep methods which can be selected to suit each particular testing parameter. This Teseq conducted RF test equipment also allows for all coupling methods to be simply and easily connected and calibrated.

Rent the ANT-HA251 broadband gain horn for 1GHz-25GHz up to a rated power of 500 Watts. It is made to generate electric field intensities within limits for radiated susceptibility testing systems. This test equipment is ideal for easy integration with Teseq, EM Test, and Milmega setups. This equipment can be rented in with an amplifier or individually to supplement existing testing capabilities.

The Teseq (previously Schaffner) NSG 3060 EMC Immunity generator provides testing for EFT(electrical fast transients) to 4.8kV, Surge to 6.6kV, 100kHz ring wave to 6.6kV and offers solutions for both CE mark, ANSI, and IEC testing.  A2LA accredited calibration is included in the EMC rental equipment price. It includes both coupling methods associated with IEC and ANSI EMC testing standards. We also offer a variety of accessories available for rent, including the CDN 3083 series (CDN3083-S100 & CDN3083-B100), allowing for enhanced testing capabilities. 

This multifunction generator offers a user-friendly design to help streamline testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN 61000-4-12, ANSI C62.41, C62.45, and UL 1449. It offers a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This system is often rented with the CDN 3061 (coupling decoupling network) allowing for single phase coupling up to 270V/16A.

This Immunity Test Generator has a Ethernet port for connect with a PC and includes window based software. This simplifies electromagnetic compatibility testing allowing for compilation of complex test sequences with diverse pulse types. The software with the NSG3060 test set enables the user to create reports and enter observations as the test progresses increasing the efficiency of long-term tests.

The NSG 438, often just referred to as the NSG438, provides testing capabilities up to 30kV with easy to use and ergonomic design. Transient Specialists is the only authorized sale partner of Teseq ESD simulators in the United States. We also offer options for A2LA accredited calibrations upon request. This ESD Gun comes with 150pF/330Ω discharge network, commonly used for IEC 61000-4-2 and ISO 10605 testing.

This test equipment color touch screen allows modification many parameters including polarity selection, pulse repetition, counter functions, and discharge network detection. This Teseq product is unique in offering an activity log where the number and type of simulations can be verified by time frame and standard. It comes with discharge pistol, cradle for discharge pistol, high voltage base unit and battery pack, and many other accessories.

This pulse generator through the screen offers selectable language options, for convenience and world wide use.  We also rent and sell a variety of other Teseq products including the NSG 435 and NSG 437 providing solutions for a large spectrum of electrostatic discharge testing. For automotive testing we also carry the NSG 438 Auto, which provides 330pF/330Ω, 150pF/2kΩ and 330pF/2kΩ networks designed for a variety of both international and manufacturer automotive standards.

The Haefely Hipotronics Axos8 EMI surge generator to 7 kV Ringwave and Surge generator with 5kV EFT (optional Dips and Interrupts) and a built-in single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. This expandable Haefely product provides safe and reliable operation by using safety interlock, warning lamp and emergency stop functions helping to ensure safe use.

This Immunity Test Generator expandable functionality allows for quick and completely automated testing to the most common IEC, EN, ANSI, IEEE and UL standards. This test equipment is user friendly with manual and automated test mode and software assisted test preparation. It provides a touch screen for  efficient and effective manipulation of testing criteria to meet or a diverse set of testing needs.

This pulse generator allows for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12 and optional external box for testing per EN/IEC 61000-4-11 and EN IEC 61000-4-29. The Axos unit can either be operated via front panel by large colour graphic interface or remotely from the PC. This product has the ability to change testing parameters while conducting tests and is useful for monitoring and debugging function during design phase as well as compliance and pre-compliance testing.