Automotive EMC Test Equipment Rental - Automotive EMI

Automotive EMC Test Equipment Rental - Automotive EMI

Automotive EMC test equipment rentals provide a cost efficient solution for testing needs without the expensive and timely process of purchasing new equipment. Automotive electromagnetic compatibility pertains to the susceptibility and potential of automotive products and components to emit and be affected by electromagnetic fields. Automotive EMI testing for vehicles differs from commercial testing by the large role company based standards play rather than international standards. The rentals of our automotive test equipment provide turnkey testing solutions, equipment comes assembled with all relevant cords and often laptops to facilitate testing. Common standards for automotive EMC testing include: ISO 7637ISO 10605ISO 16750, ISO 11452SAE J1113SAE J1455GMW3172JASO, and many other manufacturer specific standards. Common EMC Testing Car Diagram
Testing for automotive EMC is done in a variety of ways to meet the many unique automotive requirements from both international and manufacturer standards. Many manufacturer standards use ISO international standards as a benchmark and require variations to parameters within the standard. When testing for Automotive ESD the most common standard is ISO 10605. The most common non-ESD based ISO standard is ISO 7637. When attempting to meet manufacturer automotive standards ISO waveforms are used as a base line to which modifications are made.Automotive EMC ISO 7637 5a Waveform
We carry automotive EMC test equipment manufactured by EM Test and Teseq, including the NSG5500 and LD200N, VDS200N, and UCS200N. They provide equipment that generates load dump, fast transients, and power variations tests required by ISO 7637, ISO 16750, SAE J1113 and other generic standards. They are also compliant with many manufacturer's standards, including BMW, Ford, GMW 3097, Chrysler, and Nissan. The EM Test automotive EMI test units are unique, because they can be used separately, or they can be connected and used for the complete series of ISO 7637 tests, with the UCS 200n50 used as the central coupler/decoupler. We also rent Automotive Battery Simulators and Load Dump Generators to facilitate testing to ISO 7637 and many manufacturer standards.Typical Immunity Setup For Automotive EMC

Automotive EMC Test Equipment Rental - Automotive EMI

Showing 1 to 9 of 21 products

RENTAL

NSG 5500 Rental - Teseq Automotive Transient Generator

The Teseq NSG 5500 rental offers solutions for transient immunity testing based on ISO 7637 pulses 1, 2a, 3a, 3b, and the load dump pulses from ISO 16750-2.  It includes the +ARB Option for pulses 2b and 4. Our automotive EMC test equipment rentals include an accredited calibration in the rental price. This Teseq automotive transient generator includes a coupler/battery switch for testing requiring battery coupling.

The NSG 5500 system allows for testing to international, commercial, and company specific standards including. The Arbitrary waveform generator option supports >64,000 segments plus 1GB of Clone data with up to 10Ms/s 16 bit operation. Control of the testing parameters is done through PC running AutoStar™ software. The NSG 5500 Rental offers testing to be completed through a single output connector.

This turnkey product comes with a laptop with software pre-installed for efficient testing. Additional inputs and outputs are located on the rear panel for test execution control purposes and monitoring. The NSG 5500 is the first product to offer a completely internal 100 amp. battery switch for transient immunity testing. The NSG 5500 rental transient immunity generators can be used with the PA 5840-300 battery Simulator or the PA 5840-75 Battery Simulator.

  

RENTAL

PA 5840 Rental - Teseq EMC Battery Simulator 100amp

The PA5840-300 by Teseq is an 100 Amp DC power supply for use with the Teseq NSG 5500 automotive EMC immunity test system. A2LA accredited calibration is included in the automotive EMI immunity test equipment rental price. This fast, reliable, and modular battery simulator supply comes with up to 18 kW of power and is designed to simulate 12, 24, and 42 V vehicle electrical systems. 

This Automotive EMC Test Equipment provides dips and interrupts for a diverse set of automotive EMI standards including ISO 7637, waveforms 2b and 4. The PA 5840 also allows for testing to military automotive immunity standards including MIL-STD-461E. This latest Teseq model has 4 quadrant operation, important in the EV environment.

The PA 5840 includes two gain settings for use and output ranges for power efficiency. This DC power supply needs a control unit to be used.This automotive transient immunity generators setup also allows for High bandwidth up to 150 kHz. To facilitate the most efficient testing we provide rentals of both the 100 amp and the PA 5840-75 25 Amp model.  

RENTAL

PA 5840 Rental - Teseq EMC Battery Simulator 25amp

The PA5840-75 by Teseq is an 25 Amp DC power supply for use with the Teseq NSG 5500 automotive EMC immunity test system. A2LA accredited calibration is included in the automotive EMI immunity test equipment rental price. This fast, reliable, and modular battery simulator and is designed to simulate 12, 24, and 42 V vehicle electrical systems. 

This Automotive EMC Test Equipment provides dips and interrupts for a diverse set of automotive EMI standards including ISO 7637, waveforms 2b and 4. The PA 5840 also allows for testing to military automotive immunity standards including MIL-STD-461E. This latest Teseq model has 4 quadrant operation, important in the EV environment.

The PA 5840 includes two gain settings for use and output ranges for power efficiency. This DC power supply needs a control unit to be used.This automotive transient immunity generators setup also allows for High bandwidth up to 150 kHz. To facilitate the most efficient testing we provide rentals of both the 100 amp and the PA 5840-300 100 Amp model.  

RENTAL

LD200N Rental - EM Test Load Dump Generator

The EM Test LD200N Rental allows for testing to SAE J1455, SAE J1113, ISO 7637, wave forms 5 and 7. This automotive EMC test equipment simulates the sudden battery disconnection causing an over voltage impulse. A2LA accredited calibration is included in the rental. This standalone generator includes a 60 V/ 30A DC coupling/decoupling allowing for direct testing.

The Load Dump generator is an all in one system for testing high-energy pulses as required by ISO 7637. By means of a built-in clipping circuit it also generates clipped load dump pulses as per international standards as well as manufacturer requirements. The LD200N can be integrated with the UCS200N and VDS 200N  automotive transient immunity generators for a complete immunity test system, similar to the NSG 5500.  

This test equipment allows for both pre-programmed Standard Test and modification of individual pulses through the FreeStyle mode. It has an adjustable source impedance from, 0.5 Ω to 38 Ω in .1 Ω steps. r easy of use we include laptop with software with this rental arriving at your location ready for use.

RENTAL

UCS200N Rental - EM Test Automotive EFT Generator

The EM Test UCS200N rental unit is a fast transient and microburst generator for waveforms 1,2,3a,3b of SAE J1113JASOISO 7637 and many others. The built-in coupling network can be used and controlled by any unit of the LD200N series, VDS200N series and PFM200N series. A2LA accredited calibration is included in the EMC rental equipment price.

The UCS200N is equipped to meet all international and car manufacturer specifications from around the globe. Testing parameters can be modified easily through the display or via software. This Automotive EMC Test Equipment goes beyond standard's requirements waveform parameters of the Micropulse generator can be varied in a wide range by means of the FreeStyle mode.

This Teseq Automotive EMC generator includes an innovative color touch screen with intuitive menu structure and defined keys for Start / Stop / Pause, indicated by LED bars, enables the user to program test routines quickly and accurately. The UCS 200n50 also includes built in battery switch an over current protection for added testing safety. The UCS00n can be integrated with the LD200n and VDS200n  automotive transient immunity generators for a complete immunity test system, similar to that of the NSG 5500.

RENTAL

VDS200n Rental - EM Test Automotive Power Supply Generator 15Amp

The EM Test VDS200n15 power supply, and Interrupts is designed for automotive EMC standards including ISO 7637, waveforms 2b an 4. This battery supply simulator and DC voltage source provides a diverse set waveforms recommended by both international and company standards. A2LA accredited calibration is included in the EMC rental equipment price.

The VDS 200n Automotive EMC Test Equipment also allows for both pre-programmed Standard Test and modification of individual pulses. The EM Test iso.control software with the VDS200n provides fast control of all test parameters providing and efficient and effective testing solution. This EM Test immunity test generator comes with license code and software for quick setup.

This automotive waveform generator can easily be integrated with the UCS 200n and the LD 200n automotive transient immunity generators for a complete automotive test system, similar to that of the NSG 5500. It provides Current up to 200A (peak up to 1,000A) with low output impedance. The VDS 200n provides unique testing capabilities and easy to use interface, making it ideal for a variety of automotive immunity testing needs.

RENTAL

Autowave Rental - EM Test Automotive Arbitrary Waveform Generator

The EM Test Arbitrary waveform generator is used to simulate batteries under field conditions. This Immunity test product Generates and records automotive waveforms ideal for automotive standards including SAE J1113-2. A2LA accredited calibration is included in the EMC rental equipment price

The Autowave can be used in combination with VDS 200n models or any programmable DC source with 5/10VDC signal output. Autowave.control is a software developed to control the functions of this product. It provides a library of test routines per various manufacturer specifications. By means of autowave.control the user can program any kind of waveform either composed from segments or points and download into the AutoWave.

This Automotive EMC Test Equipment has Enhanced graphic tools are at hand to adjust the waveform according to individual requirements. Autowave.control provides a library of an extensive compilation of predefined segments as well as a large number of test routines as per various manufacturer specifications. This product combines 4-channel arbitrary generator and a 2-channel transient wave recorder into a compact unit. 

RENTAL

PFM 200N100 Rental - Automotive Power Fail Simulator

PFM 200N100 made by EM Test is a unique automotive power fail simulator for LV 124 / LV 148 and Microinterruptions as per manufacturer standards. A2LA accredited calibration is included in the EMC rental equipment price. The PFM200N100 series includes a switch for the power supply line from 100 mA to 100A and a separate witch in the ground return path. 

The PFM 200 N 100 has been designed to fully meet the requirements for E10, E13 and E14 of the LV 124 and the E48-09 of the LV148. It also allows performing microinterruptions with fast rise/fall time of as low as 200ns as required by GMW 3172, sec. 9.2.18. The PFM 200n100 when combined with the EM Test autowave, can be used as a substitute for the PFS 200n.

RENTAL

NSG 437 Rental - Teseq Automotive 30kV ESD Simulator

The Teseq NSG437 automotive ESD simulator allows for testing to 30kV air and contact with a simple and easy to use design. A2LA accredited calibration is included in the EMC rental equipment price. This equipment allows for testing to both 16kV and 30kV for air and contact allowing for efficient testing to several standards.

This ESD test equipment allows for manipulation of testing parameters for EN IEC 61000-4-2ANSI C63.16, ISO 10605, and TR 10605 through the use of the display. It is designed to sit comfortably in the operator’s hand, with operating conditions constantly displayed and accessible on a bright, clear color touch display. This Teseq product is unique in offering an activity log where the number and type of simulations can be verified by time frame and standard.

The NSG 437 ESD Simulator has a color touch display and keypad for parameter input shows the precise functional and test data with user-selectable language for convenient and safe operation worldwide. The simulator contains variable threshold selection for accurate discharge detection. This detection feature can be switched off when testing EUT’s with non-conductive surfaces, such as plastic housings.

Options:
  • Rental 1 Week $645.00
  • Rental 1 Month $1,290.00

Showing 1 to 9 of 21 products