EN IEC 61000-6-2 - Immunity Rentals for Industrial Environments
Showing 1 to 9 of 38 products
The Teseq (previously Schaffner) NSG 3060 EMC Immunity generator provides testing for EFT(electrical fast transients) to 4.8kV, Surge to 6.6kV, 100kHz ring wave to 6.6kV and offers solutions for both CE mark, ANSI, and IEC testing. A2LA accredited calibration is included in the EMC rental equipment price. It includes both coupling methods associated with IEC and ANSI EMC testing standards. We also offer a variety of accessories available for rent, including the CDN 3083 series (CDN3083-S100 & CDN3083-B100), allowing for enhanced testing capabilities.
This multifunction generator offers a user-friendly design to help streamline testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN 61000-4-12, ANSI C62.41, C62.45, and UL 1449. It offers a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This system is often rented with the CDN 3061 (coupling decoupling network) allowing for single phase coupling up to 270V/16A.
This Immunity Test Generator has a Ethernet port for connect with a PC and includes window based software. This simplifies electromagnetic compatibility testing allowing for compilation of complex test sequences with diverse pulse types. The software with the NSG3060 test set enables the user to create reports and enter observations as the test progresses increasing the efficiency of long-term tests.
The Teseq NSG 3040 electromagnetic immunity (EMI) test generator provides 4.4kV Surge and 4.4kV electrical fast transient (EFT) with a built-in single phase coupler and is designed primarily for cable-borne transient interference tests. A2LA accredited calibration is included in the EMC rental equipment price. This Teseq products modular architecture and industry standard interfaces allow it to be easily expanded and customized to meet individual testing needs.
This Immunity Test Generator is designed to fulfill conducted EMC testing requirements for CE mark testing, including Combination Wave Surge (4.4 kV), Electrical Fast Transient (EFT) pulses (4.8 kV) and Power Quality Testing (PQT). The NSG3040 includes a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This EMC test equipment can also be controlled via PC through the Ethernet Port.
This Teseq (previously known as Schaffner) surge/immunity generator is an all in one box that tests to EN/IEC 61000-4-4, EN/IEC 61000-4-5 and EN/IEC 61000-4-11 and CE Mark with optional INA 6502. Expansion capabilities enable the system to be configured for a much broader range of applications including Telecom Surge 10/700 and Magnetic Field tests. This pulse generator, similar to the NSG 3060, provides the same easy to use interface and connection methods.
The EMC Partner TRA3000 EMI pulse generator (Optional: Common Mode or Dips/Interrupts) is an all in one unit testing solution for testing EFT to 4.4kV and Surge to 4.1kV with built-in single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.
This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. This EMC Patner pulse generator includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions. It is a environmentally conscience solution with low power consumption, less noise, and less heat.The TRA3000 is a single unit testing system for EN/IEC 61000-4-4, EN/IEC 61000-4-5, and CE Marking. With the common mode or dips/interrupts available for testing to EN/IEC 61000-4-11 and EN/IEC 61000-4-16, this design offers flexibility depending on testing needs. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.
The CBA 1G-600B has the capacity to produce a 600W 80MHz to 1GHz and can be controlled via front panel or via latop with USB, GPIB, RS232 and Ethernet connections. It is compatible and can be easily integrated with a wide variety Teseq products and test systems. The minimum of 500W linear power makes it a excellent solution for RF immunity testing for a variety of applications including military, automotive, and aerospace applications.
This EMC test equipment is often used for RF immunity testing to IEC 61000-4-3, MIL-STD 461, ISO 11452, RTCA DO-160, and many others. We also carry the CBA 1G-300B, which provide 300W capabilities with the same frequency range. It is often included in test setups with associated Teseq products, including the NSG 4070 and ITS 6006. The touch screen front panel gives immediate fedback and provides information including operating status and heatsink temperature.
Our amplifiers provide turnkey solutions coming with required cords and accessories. The inbuilt fan speed automatically adjusts according to the heatsink temperature ensuring the minimum audio noise level. To supplement testing, we also rent many other amplifiers including S251-300 (800MHz-2.5Ghz 300w) and AS0860-50 (800Mhz-6Ghz 50W).
The IFI T188-250 Amplifier which can produce 250W in the 7.5GHz to 18GHz frequency range. These are "state of the art" and have field proven reliability and unsurpassed performance as the best in the industry. This test system makes an excellent solution for RF immunity testing for a variety of applications including military, automotive, and aerospace applications.
This test equipment has a backlit LCD display allowing for easy modification of testing parameters. This screen shows forward/reverse power indication, system status, and self-diagnostic information. The selection switches on the right of the front panel allow the user to easily select the desired mode if not being controlled via laptop.
This solid state power supply is designed to meet a wide variety of standards including MIL-STD-461 RS103, ISO 11452, and DO 160 sec20. This IFI product is easily integrated into a preexisting setup often and reliable rugged construction lends itself well to any testing environment. This amplifier comes with all required cords and testing accessories arriving at test location ready for testing to begin.
UCS 500N7 Rental - EM Test EFT to 5.5kV, Surge to 7kV and 100kHz Ring to 6kV, Built-in Single Phase Power Coupler
The EM Test UCS500N7 is an EMC Immunity Test equipment is an all in one box for testing EFT to 5.5kV, Surge to 7kV and 100kHz Ringwave to 6 kV, with built-in single phase coupler and software. This test equipment provides optional Dips and Interrupts testing with the V4780 S2 external variac. The UCS500N7 includes a built-in CDN for single phase it can be extended for testing three-phse DUT's by means of automatically controlled external coupling network up to 100A.
This Immunity Test Generator can be operated via the front panel or by remote via the built-in USB or GPIB interface. Fail inputs allow control an ongoing test sequences based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. This EMI test equipment provides a fully compliant that goes to levels beyond common testing requirements.
The UCS500n7 includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11, EN/IEC 61000-4-12, CEMark, ANSI/IEEE C62.41 cat. B, EN IEC 61000-6-1, and EN IEC 61000-6-2. This product also includes both pre-programmed standard tests and a quick start menu allowing for parameters to be changed on-line during the test to evaluate the susceptibility level of an individual DUT.
The AS0860 amplifier has the frequency range of 800MHz to 6GHz up to 50 watts and be controlled via front panel or with a laptop or computer. This test equipment can be easily integrated into Teseq, EM Test, and Milmega product setups. It is designed to ensures that the amplifier will continue to operate at full power even when presented with an open or short circuit at its output. The frequency ranges and power make it a great solution for Telecom, Instrumentation, and many other applications.
This EMC test equipment is powered from a high efficiency power supply with a high power factor and wide range of voltage operations.The unit is air-cooled with integral fans, is protected against faulty cooling by excess temperature sensing. A safety interlock connector is provided, which the user can short circuit to ground, to put the amplifier into standby mode.
Our amplifiers provide turnkey solutions coming with required cords and accessories. The front panel display provides immediate results and allows for quick modification of testing parameters. It also provides operational status and heatsink temperature. To supplement testing requirements we also offer a variety of other antennas and amplifiers making Transient Specialists the go-to resource for rentals.
The Teseq CBA 400M-110 can supply 110Watt into a 50 ohm load over the range of 10kHz-400Mhz. This mismatch tolerant and unconditionally stable Class A broadband amplifier is ideal for bulk current injection (BCI) EMC Testing including automotive, military, and aerospace applications. This test equipment is powered by a switch mode power supply, is air cooled with integral fans, and protected against faulty cooling via temperature sensing.
This equipment provides testing to a wide variety of EMC immunity testing. It provides indicator lights for radio frequency (RF) interlock operations and over-temperature. The unique construction of this test equipment will continue to work at full power when presented with an open or short circuit at its output. This easy to use test system allows for easy testing to EN/IEC 61000-4-6, CISPR 24, and many other standards.
All of our power supplies come with all required cords for use and provide a turnkey testing solution. We also carry a variety of other amplifiers including the CBA 1G-300 (80Mhz-1Ghz 300W) and TI88-250 (7.5Ghz-18Ghz 250W) to facilitate higher frequency and power testing needs. This product requires mains plug only be connected in a socket providing protective earth contact.
The EMC Pro Plus made by Thermo Fisher Scientific is a 6 kv Generator for EFT to 4.4kV, Surge to 6kV, 100 kHz Ringwave to 6kV, Dips and Interrupts with a built-in single phase coupler. All of our EMC Immunity generators come with an A2LA calibration & technical support. Additional test capabilities such as the 10x700 Telecom Wave is available on request.
This EMI Immunity Generator is an easy to use, cost effective solution to a diverse set of testing needs. This system provides easy to use front panel display and can be controlled via computer through windows based software. It also monitors output of the coupling unit and automatically switches connections according to coupling mode.
The EMC Pro Plus is designed to test for a variety of EMC immunity industry standards including EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11, EN/IEC 61000-4-12, CEMark, and ANSI IEEE C62.41 cat. B. The EMC Pro Plus rental equipment It also can also be configured for custom test protocols to meet specific test requirements using the software and a full line of options and accessories.